ridiculous technical questions day

On Thu, 03 Apr 2008 05:57:19 GMT, Ryan Cousineau <[email hidden]>

Quoted message said:

1) I went out for an MTB ride yesterday, and a chain incident culminated
in the chain getting stuck between the cassette and the spokes, utterly
destroying the plastic spoke guard in the process (the chain came back
out no problem with some backpedaling).

Does this prove the effectiveness of spoke guards, or their irrelevance?

[snip]

Dear Ryan,

Are the spokes damaged?

Cheers,

Carl Fogel

Quoted message said:

On Thu, 03 Apr 2008 05:57:19 GMT, Ryan Cousineau <[email hidden]>

Quoted message said:

1) I went out for an MTB ride yesterday, and a chain incident culminated
in the chain getting stuck between the cassette and the spokes, utterly
destroying the plastic spoke guard in the process (the chain came back
out no problem with some backpedaling).

Quoted message said:

Does this prove the effectiveness of spoke guards, or their irrelevance?

[snip]

Dear Ryan,

Are the spokes damaged?

Cheers,

Carl Fogel

And/or did the derailleur or hanger get mangled?

Joseph

Ryan Cousineau said:

1) I went out for an MTB ride yesterday, and a chain incident culminated
in the chain getting stuck between the cassette and the spokes, utterly
destroying the plastic spoke guard in the process (the chain came back
out no problem with some backpedaling).

Does this prove the effectiveness of spoke guards, or their irrelevance?

2) I have committed to buy a Shimano Alfine gearhub for no good reasons
other than its mechanical neatness, tolerable price, and the magic words
"Ultegra-grade." In theory, my ultimate excuse will be to use it in my
mud-proof cyclocross bike experiment.

It looks like the thing will go into a wheel which I will then slot into
a late-80s Pinarello road bike. I will use the twist-grip shifter on a
flat bar, and add a clip-on aerobar.

I'm thinking about using some MTB bar ends finish off the bar, and then
sticking some aero-style brake levers (for bullhorn bars) in the ends,
making a sort of pseudo aerobar with bullhorn base setup.

Will the brake levers fit into any existing MTB bar ends? Am I nutty?
Should I just go with flat-bar brake levers and the aerobar? Am I a
loonytune? Any other suggestions for what to do with a bare Alfine hub?

3) the Alfine wheel: I plan to build it up with a deep-section rim,
partly for aero, partly for cyclocross, partly because I am clearly a
nut. Any of those available in a 32h drilling?

4) which anti-turn nuts come in the standard Alfine package?

I thank you for your patience.

--
Ryan Cousineau [email hidden]://www.wiredcola.com/
"In other newsgroups, they killfile trolls."
"In rec.bicycles.racing, we coach them."

You are insane.

What about some bars like these:

http://www.rei.com/product/768947

But for a set-up more like what you were thinking, how about a pursuit
bar, or if you want wide, a stoker bar. Those can be had for under $30
and fit bar end brakes fine. More solid that MTB bar-ends too. And of
course plenty of room for your aero bars.

About the wheel, what is the question about 32h? The Shimano pages
says the hubs come in 32 and 36. For a rim, how about a Velocity Deep-
V?

Joseph

Joseph

Ryan Cousineau said:

1) I went out for an MTB ride yesterday, and a chain incident culminated
in the chain getting stuck between the cassette and the spokes, utterly
destroying the plastic spoke guard in the process (the chain came back
out no problem with some backpedaling).

Does this prove the effectiveness of spoke guards, or their irrelevance?

2) I have committed to buy a Shimano Alfine gearhub for no good reasons
other than its mechanical neatness, tolerable price, and the magic words
"Ultegra-grade." In theory, my ultimate excuse will be to use it in my
mud-proof cyclocross bike experiment.

It looks like the thing will go into a wheel which I will then slot into
a late-80s Pinarello road bike. I will use the twist-grip shifter on a
flat bar, and add a clip-on aerobar.

I'm thinking about using some MTB bar ends finish off the bar, and then
sticking some aero-style brake levers (for bullhorn bars) in the ends,
making a sort of pseudo aerobar with bullhorn base setup.

Will the brake levers fit into any existing MTB bar ends? Am I nutty?
Should I just go with flat-bar brake levers and the aerobar? Am I a
loonytune? Any other suggestions for what to do with a bare Alfine hub?

3) the Alfine wheel: I plan to build it up with a deep-section rim,
partly for aero, partly for cyclocross, partly because I am clearly a
nut. Any of those available in a 32h drilling?

4) which anti-turn nuts come in the standard Alfine package?

I thank you for your patience.

--
Ryan Cousineau [email hidden] http://www.wiredcola.com/
"In other newsgroups, they killfile trolls."
"In rec.bicycles.racing, we coach them."

The standard fitting kit comes with 2 sets of anti rotation washers. Blue-green for vertical and white-silver for horizontal.
Dan Burkhart
www.boomerbicycle.ca

Ryan Cousineau said:

1) I went out for an MTB ride yesterday, and a chain incident culminated
in the chain getting stuck between the cassette and the spokes, utterly
destroying the plastic spoke guard in the process (the chain came back
out no problem with some backpedaling).

Does this prove the effectiveness of spoke guards, or their irrelevance?

2) I have committed to buy a Shimano Alfine gearhub for no good reasons
other than its mechanical neatness, tolerable price, and the magic words
"Ultegra-grade." In theory, my ultimate excuse will be to use it in my
mud-proof cyclocross bike experiment.

It looks like the thing will go into a wheel which I will then slot into
a late-80s Pinarello road bike. I will use the twist-grip shifter on a
flat bar, and add a clip-on aerobar.

I'm thinking about using some MTB bar ends finish off the bar, and then
sticking some aero-style brake levers (for bullhorn bars) in the ends,
making a sort of pseudo aerobar with bullhorn base setup.

Will the brake levers fit into any existing MTB bar ends? Am I nutty?
Should I just go with flat-bar brake levers and the aerobar? Am I a
loonytune? Any other suggestions for what to do with a bare Alfine hub?

3) the Alfine wheel: I plan to build it up with a deep-section rim,
partly for aero, partly for cyclocross, partly because I am clearly a
nut. Any of those available in a 32h drilling?

4) which anti-turn nuts come in the standard Alfine package?

I thank you for your patience.

--
Ryan Cousineau [email hidden] http://www.wiredcola.com/
"In other newsgroups, they killfile trolls."
"In rec.bicycles.racing, we coach them."

On your number 3: I would consider Alex Rims Crostini T1.2 it is not deep at 18 mm but it is offset for a more durable build even with Alfine hub it likely would be dishless and has an 17.5 internal width for handling wider tires.
If you must go higher profile, Alex Rims has a 30 mm deep G6000 with 17 mm internal width or Velocity has 30 mm deep DeepV with a narrower internal dimension. All of them are available in 32 and 36H.

On Apr 3, 8:04 am, daveornee <daveornee.37a...@no-

mx.forums.cyclingforums.com said:

Ryan Cousineau said:

1) I went out for an MTB ride yesterday, and a chain incident
culminated
in the chain getting stuck between the cassette and the spokes,
utterly
destroying the plastic spoke guard in the process (the chain came back
out no problem with some backpedaling).

Quoted message said:

Does this prove the effectiveness of spoke guards, or their
irrelevance?

Quoted message said:

2) I have committed to buy a Shimano Alfine gearhub for no good
reasons
other than its mechanical neatness, tolerable price, and the magic
words
"Ultegra-grade." In theory, my ultimate excuse will be to use it in my
mud-proof cyclocross bike experiment.

Quoted message said:

It looks like the thing will go into a wheel which I will then slot
into
a late-80s Pinarello road bike. I will use the twist-grip shifter on a
flat bar, and add a clip-on aerobar.

Quoted message said:

I'm thinking about using some MTB bar ends finish off the bar, and
then
sticking some aero-style brake levers (for bullhorn bars) in the ends,
making a sort of pseudo aerobar with bullhorn base setup.

Quoted message said:

Will the brake levers fit into any existing MTB bar ends? Am I nutty?
Should I just go with flat-bar brake levers and the aerobar? Am I a
loonytune? Any other suggestions for what to do with a bare Alfine
hub?

Quoted message said:

3) the Alfine wheel: I plan to build it up with a deep-section rim,
partly for aero, partly for cyclocross, partly because I am clearly a
nut. Any of those available in a 32h drilling?

Quoted message said:

4) which anti-turn nuts come in the standard Alfine package?

Quoted message said:

I thank you for your patience.

Quoted message said:

--
Ryan Cousineau [email hidden]://www.wiredcola.com/
"In other newsgroups, they killfile trolls."
"In rec.bicycles.racing, we coach them."

On your number 3: I would consider Alex Rims Crostini T1.2 it is not
deep at 18 mm but it is offset for a more durable build even with Alfine
hub it likely would be dishless and has an 17.5 internal width for
handling wider tires.
If you must go higher profile, Alex Rims has a 30 mm deep G6000 with 17
mm internal width or Velocity has 30 mm deep DeepV with a narrower
internal dimension.  All of them are available in 32 and 36H.

Unfortunately, the Alex rims you mention aren't distributed to
consumers in north America. I've only seen Crostinis as OEM. However--
just about any mid-weight 500g rim should build up really nice and
robust on a gearhub.

On Thu, 03 Apr 2008 05:57:19 GMT, Ryan Cousineau <[email hidden]>

Quoted message said:

1) I went out for an MTB ride yesterday, and a chain incident culminated
in the chain getting stuck between the cassette and the spokes, utterly
destroying the plastic spoke guard in the process (the chain came back
out no problem with some backpedaling).

Does this prove the effectiveness of spoke guards, or their irrelevance?

Are you *trying* to start a h*lm*t thread?

Jasper

email hidden said:

Ryan Cousineau said:

1) I went out for an MTB ride yesterday, and a chain incident culminated
in the chain getting stuck between the cassette and the spokes, utterly
destroying the plastic spoke guard in the process (the chain came back
out no problem with some backpedaling).

Quoted message said:

Does this prove the effectiveness of spoke guards, or their irrelevance?

Quoted message said:

2) I have committed to buy a Shimano Alfine gearhub for no good reasons
other than its mechanical neatness, tolerable price, and the magic words
"Ultegra-grade." In theory, my ultimate excuse will be to use it in my
mud-proof cyclocross bike experiment.

Quoted message said:

It looks like the thing will go into a wheel which I will then slot into
a late-80s Pinarello road bike. I will use the twist-grip shifter on a
flat bar, and add a clip-on aerobar.

Quoted message said:

I'm thinking about using some MTB bar ends finish off the bar, and then
sticking some aero-style brake levers (for bullhorn bars) in the ends,
making a sort of pseudo aerobar with bullhorn base setup.

Quoted message said:

Will the brake levers fit into any existing MTB bar ends? Am I nutty?
Should I just go with flat-bar brake levers and the aerobar? Am I a
loonytune? Any other suggestions for what to do with a bare Alfine hub?

Quoted message said:

3) the Alfine wheel: I plan to build it up with a deep-section rim,
partly for aero, partly for cyclocross, partly because I am clearly a
nut. Any of those available in a 32h drilling?

Quoted message said:

4) which anti-turn nuts come in the standard Alfine package?

Quoted message said:

I thank you for your patience.

Quoted message said:

--
Ryan Cousineau [email hidden]://www.wiredcola.com/
"In other newsgroups, they killfile trolls."
"In rec.bicycles.racing, we coach them."

You are insane.

What about some bars like these:

http://www.rei.com/product/768947

But for a set-up more like what you were thinking, how about a pursuit
bar, or if you want wide, a stoker bar. Those can be had for under $30
and fit bar end brakes fine. More solid that MTB bar-ends too. And of
course plenty of room for your aero bars.

About the wheel, what is the question about 32h? The Shimano pages
says the hubs come in 32 and 36. For a rim, how about a Velocity Deep-
V?

Joseph

Joseph

email hidden said:

Ryan Cousineau said:

1) I went out for an MTB ride yesterday, and a chain incident culminated
in the chain getting stuck between the cassette and the spokes, utterly
destroying the plastic spoke guard in the process (the chain came back
out no problem with some backpedaling).

Quoted message said:

Does this prove the effectiveness of spoke guards, or their irrelevance?

Quoted message said:

2) I have committed to buy a Shimano Alfine gearhub for no good reasons
other than its mechanical neatness, tolerable price, and the magic words
"Ultegra-grade." In theory, my ultimate excuse will be to use it in my
mud-proof cyclocross bike experiment.

Quoted message said:

It looks like the thing will go into a wheel which I will then slot into
a late-80s Pinarello road bike. I will use the twist-grip shifter on a
flat bar, and add a clip-on aerobar.

Quoted message said:

I'm thinking about using some MTB bar ends finish off the bar, and then
sticking some aero-style brake levers (for bullhorn bars) in the ends,
making a sort of pseudo aerobar with bullhorn base setup.

Quoted message said:

Will the brake levers fit into any existing MTB bar ends? Am I nutty?
Should I just go with flat-bar brake levers and the aerobar? Am I a
loonytune? Any other suggestions for what to do with a bare Alfine hub?

Quoted message said:

3) the Alfine wheel: I plan to build it up with a deep-section rim,
partly for aero, partly for cyclocross, partly because I am clearly a
nut. Any of those available in a 32h drilling?

Quoted message said:

4) which anti-turn nuts come in the standard Alfine package?

Quoted message said:

I thank you for your patience.

Quoted message said:

--
Ryan Cousineau [email hidden]://www.wiredcola.com/
"In other newsgroups, they killfile trolls."
"In rec.bicycles.racing, we coach them."

You are insane.

What about some bars like these:

http://www.rei.com/product/768947

But for a set-up more like what you were thinking, how about a pursuit
bar, or if you want wide, a stoker bar. Those can be had for under $30
and fit bar end brakes fine. More solid that MTB bar-ends too. And of
course plenty of room for your aero bars.

About the wheel, what is the question about 32h? The Shimano pages
says the hubs come in 32 and 36. For a rim, how about a Velocity Deep-
V?

Joseph

Joseph

email hidden said:

You are insane.

I was gonna say batshit crazy!

Quoted message said:

What about some bars like these:

http://www.rei.com/product/768947

Those are a really nice clean solution. Alternately, some trekking
bars would be worth a shot. Only ~$20 for the Nashbar version, and
they pretty much eliminate my biggest gripe about grippy shifters
which is that they're uncomfortable. Ugly--but nothing's as ugly as
aerobars <shivver>. Plus the outside grip position should be great for
climbing.

http://tinyurl.com/2l3dzd

Alex DA28 is a lightly cheaper and lighter alternative to the Deep V,
although it only comes in black with a machined sidewall. But if
you're gonna go nuts, might as well go pink or brown or fuschia
Velocity.

Ryan Cousineau said:

1) I went out for an MTB ride yesterday, and a chain incident culminated
in the chain getting stuck between the cassette and the spokes, utterly
destroying the plastic spoke guard in the process (the chain came back
out no problem with some backpedaling).

Does this prove the effectiveness of spoke guards, or their irrelevance?

I they're effective, but so is a proper derailer adjustment [hehe]

Quoted message said:

2) I have committed to buy a Shimano Alfine gearhub for no good reasons
other than its mechanical neatness, tolerable price, and the magic words
"Ultegra-grade." In theory, my ultimate excuse will be to use it in my
mud-proof cyclocross bike experiment.

Sweet.

Quoted message said:

It looks like the thing will go into a wheel which I will then slot into
a late-80s Pinarello road bike. I will use the twist-grip shifter on a
flat bar, and add a clip-on aerobar.

barf.

Quoted message said:

I'm thinking about using some MTB bar ends finish off the bar, and then
sticking some aero-style brake levers (for bullhorn bars) in the ends,
making a sort of pseudo aerobar with bullhorn base setup.

I've got some NIB silver Syntace bullhorns layin' around. I'd sell them
to ya cheap if shipping to Canadia from Atlantia was reasonable.

Quoted message said:

Will the brake levers fit into any existing MTB bar ends? Am I nutty?
Should I just go with flat-bar brake levers and the aerobar? Am I a
loonytune? Any other suggestions for what to do with a bare Alfine hub?

I, for one, was inspired by the bar-end shifter/Alfine thread. Maybe a
DT shifter could work with the Travel Agent down by the hub or mounted
further down the down tube, somehow. Hell, if your putting aerobars one
there, use a bar-end shifter in the aerobar.

Quoted message said:

3) the Alfine wheel: I plan to build it up with a deep-section rim,
partly for aero, partly for cyclocross, partly because I am clearly a
nut. Any of those available in a 32h drilling?

Velocity Deep-Vs come in 32h. I don't know if that's deep enough. If
so, choose your colors wisely.

AS someone who just got Campy shifters going to my Tiagra and 600
derailers, I definitely want to see this abomination when it's done.

\\paul
--
Paul M. Hobson
..:change the f to ph to reply:.

Paul M. Hobson said:

Ryan Cousineau said:

1) I went out for an MTB ride yesterday, and a chain incident culminated
in the chain getting stuck between the cassette and the spokes, utterly
destroying the plastic spoke guard in the process (the chain came back
out no problem with some backpedaling).

Quoted message said:

Does this prove the effectiveness of spoke guards, or their irrelevance?

I they're effective, but so is a proper derailer adjustment [hehe]

Quoted message said:

2) I have committed to buy a Shimano Alfine gearhub for no good reasons
other than its mechanical neatness, tolerable price, and the magic words
"Ultegra-grade." In theory, my ultimate excuse will be to use it in my
mud-proof cyclocross bike experiment.

Sweet.

Quoted message said:

It looks like the thing will go into a wheel which I will then slot into
a late-80s Pinarello road bike. I will use the twist-grip shifter on a
flat bar, and add a clip-on aerobar.

barf.

Make it a hurl if you add a spandex rear wheel fairing and some color-
blok shorts! 80s...tri-style!

Ryan Cousineau <[email hidden]> wrote in
news:rcousine-70BDA0.22571702042008@[74.223.185.199.nw.nuvox.n
et]:

Quoted message said:

1) I went out for an MTB ride yesterday, and a chain
incident culminated in the chain getting stuck between the
cassette and the spokes, utterly destroying the plastic
spoke guard in the process (the chain came back out no
problem with some backpedaling).

Does this prove the effectiveness of spoke guards, or their
irrelevance?

Irrelevance, obviously.

Quoted message said:

2) I have committed to buy a Shimano Alfine gearhub for no
good reasons other than its mechanical neatness, tolerable
price, and the magic words "Ultegra-grade." In theory, my
ultimate excuse will be to use it in my mud-proof
cyclocross bike experiment.

Sound like good reasons to me. I have vague dreams of turning
my commuter Cross-Check into a 'cross Cross-Check. Would look a
little too dorky with the current flat bar though.

Quoted message said:

It looks like the thing will go into a wheel which I will
then slot into a late-80s Pinarello road bike. I will use
the twist-grip shifter on a flat bar, and add a clip-on
aerobar.

I'm thinking about using some MTB bar ends finish off the
bar, and then sticking some aero-style brake levers (for
bullhorn bars) in the ends, making a sort of pseudo aerobar
with bullhorn base setup.

Will the brake levers fit into any existing MTB bar ends?
Am I nutty? Should I just go with flat-bar brake levers and
the aerobar? Am I a loonytune? Any other suggestions for
what to do with a bare Alfine hub?

A guy at a local shop uses an 8-speed bar-end shifter with a
Travel Agent on his Nexus 8.
He says it works pretty well, though there is some play in the
shifter because it isn't quite as precise as the Nexus shifters.
I'm really really tempted to try it myself.

http://www.oldspokeshome.com/blog/?page_id=125

Quoted message said:

3) the Alfine wheel: I plan to build it up with a
deep-section rim, partly for aero, partly for cyclocross,
partly because I am clearly a nut. Any of those available
in a 32h drilling?

Velocity Deep V for one.

Quoted message said:

I thank you for your patience.

You're welcome.

-Owen

landotter said:

Paul M. Hobson said:

Ryan Cousineau said:

1) I went out for an MTB ride yesterday, and a chain incident culminated
in the chain getting stuck between the cassette and the spokes, utterly
destroying the plastic spoke guard in the process (the chain came back
out no problem with some backpedaling).

Quoted message said:

Quoted message said:

Does this prove the effectiveness of spoke guards, or their irrelevance?

Quoted message said:

I they're effective, but so is a proper derailer adjustment [hehe]

Quoted message said:

Quoted message said:

2) I have committed to buy a Shimano Alfine gearhub for no good reasons
other than its mechanical neatness, tolerable price, and the magic words
"Ultegra-grade." In theory, my ultimate excuse will be to use it in my
mud-proof cyclocross bike experiment.

Quoted message said:

Sweet.

Quoted message said:

Quoted message said:

It looks like the thing will go into a wheel which I will then slot into
a late-80s Pinarello road bike. I will use the twist-grip shifter on a
flat bar, and add a clip-on aerobar.

Quoted message said:

barf.

Make it a hurl if you add a spandex rear wheel fairing and some color-
blok shorts! 80s...tri-style!

And a Speedo!

Joseph

In article
<[email hidden]>,

Quoted post said:

Quoted message said:

On Thu, 03 Apr 2008 05:57:19 GMT, Ryan Cousineau <[email hidden]>

Quoted message said:

1) I went out for an MTB ride yesterday, and a chain incident culminated
in the chain getting stuck between the cassette and the spokes, utterly
destroying the plastic spoke guard in the process (the chain came back
out no problem with some backpedaling).

Quoted message said:

Does this prove the effectiveness of spoke guards, or their irrelevance?

[snip]

Dear Ryan,

Are the spokes damaged?

Cheers,

Carl Fogel

And/or did the derailleur or hanger get mangled?

Joseph

The derailer and hanger (XT 8 on a steel Kona; I can't even remember if
the hanger is separate) are fine. They didn't get displaced during the,
ah, event.

I don't think the spokes were damaged, but I haven't checked closely.
The peril of having however many bikes I have is that instead of one
bike meticulously maintained, I have four bikes that are rideable.

--
Ryan Cousineau [email hidden] http://www.wiredcola.com/
"In other newsgroups, they killfile trolls."
"In rec.bicycles.racing, we coach them."

In article <[email hidden]>,

daveornee said:

Ryan Cousineau Wrote:

Quoted message said:

Quoted message said:

2) I have committed to buy a Shimano Alfine gearhub for no good
reasons

Quoted message said:

Quoted message said:

3) the Alfine wheel: I plan to build it up with a deep-section rim,
partly for aero, partly for cyclocross, partly because I am clearly a
nut. Any of those available in a 32h drilling?

Quoted message said:

On your number 3: I would consider Alex Rims Crostini T1.2 it is not
deep at 18 mm but it is offset for a more durable build even with Alfine
hub it likely would be dishless and has an 17.5 internal width for
handling wider tires.

Surprisingly, fat tires are not a big priority. The widest tires likely
to get used on this wheel are CX tires, which stop at 35 mm (I could run
wider 29er tires for a super-cheater mud bike, but I'm likely to run out
of frame...).

In practice, I run about a 32 mm CX tire, and 25 mm road (racing) tires.
This won't be a touring bike, especially in v 1.0; the Pinarello has
terribly tight frame clearances.

Quoted message said:

If you must go higher profile, Alex Rims has a 30 mm deep G6000 with 17
mm internal width or Velocity has 30 mm deep DeepV with a narrower
internal dimension. All of them are available in 32 and 36H.

The Deep-V seems a reasonable consensus choice, and I may well end up
there.

--
Ryan Cousineau [email hidden] http://www.wiredcola.com/
"In other newsgroups, they killfile trolls."
"In rec.bicycles.racing, we coach them."

In article <[email hidden]>,

Paul M. Hobson said:

Ryan Cousineau wrote:

Quoted message said:

Quoted message said:

2) I have committed to buy a Shimano Alfine gearhub for no good reasons

Quoted message said:

Quoted message said:

It looks like the thing will go into a wheel which I will then slot into
a late-80s Pinarello road bike. I will use the twist-grip shifter on a
flat bar, and add a clip-on aerobar.

barf.

Quoted message said:

I'm thinking about using some MTB bar ends finish off the bar, and then
sticking some aero-style brake levers (for bullhorn bars) in the ends,
making a sort of pseudo aerobar with bullhorn base setup.

I've got some NIB silver Syntace bullhorns layin' around. I'd sell them
to ya cheap if shipping to Canadia from Atlantia was reasonable.

I'd be happy to take you up on your offer, but the thing I'm fighting
against is whether there's such a thing as a bullhorn that was 7/8" (MTB
spec) and with a gentle enough curve to finesse a Nexus grip-shifter on.
I doubt it...

Quoted message said:

Quoted message said:

Will the brake levers fit into any existing MTB bar ends? Am I nutty?
Should I just go with flat-bar brake levers and the aerobar? Am I a
loonytune? Any other suggestions for what to do with a bare Alfine hub?

I, for one, was inspired by the bar-end shifter/Alfine thread. Maybe a
DT shifter could work with the Travel Agent down by the hub or mounted
further down the down tube, somehow. Hell, if your putting aerobars one
there, use a bar-end shifter in the aerobar.

I too. The particular aerobars I have are very retro Scotts: the type
with a plastic cap joining the ends of the two aero extensions, so I
could change that up...

But I know I will have the grip-shifter, while I'd have to buy a Travel
Agent and a suitable shifter. We'll see...

Quoted message said:

Quoted message said:

3) the Alfine wheel: I plan to build it up with a deep-section rim,
partly for aero, partly for cyclocross, partly because I am clearly a
nut. Any of those available in a 32h drilling?

Velocity Deep-Vs come in 32h. I don't know if that's deep enough. If
so, choose your colors wisely.

AS someone who just got Campy shifters going to my Tiagra and 600
derailers, I definitely want to see this abomination when it's done.

You may be interested in the Tiagr-Ace group on my 'cross bike.

The Shimagnolo 9 on the race bike is old hat,

--
Ryan Cousineau [email hidden] http://www.wiredcola.com/
"In other newsgroups, they killfile trolls."
"In rec.bicycles.racing, we coach them."