The Nimbus trials uni is a decent unicycle, same rim tyre and seat as
the more expensive varieties. It can take drops, but not huge one's -
people don't pay £100 for splined hubs and crnaks because they like the
colour. I've got one and I've done drops up to about 3' and it's coping
OK. Good technique like rolling out of drops and things will help, and
for the technical aspects of trials like going up things and riding thin
stuff it'll be fine. Probably fine for grinds unless you end a grind by
doing a huge drop. I can't grind, but I can't see it breaking the uni.
Having said that, if you do intend to do huge drops, then sooner or
later you will break it. Normally that'll just be twisted cranks which
can be replaced easily enough and cheap enough, but if you break lots of
sets of cranks it'll all add up, and if you break the axle that's quite
a bit more, so if you can afford a splined set up it might be a good
idea.
The other possibility is to get the nimbus and then when you break it
get a splined hub and crank set, and rebiuld he wheel with the new bits.
Not as cheap as buying a splined uni to start with, but it spreads the
cost a bit.
John
--
johnhimsworth - Nullus Anxietas
What if the hokey cokey really is what it's all about?
------------------------------------------------------------------------
johnhimsworth's Profile: http://www.unicyclist.com/profile/1788
View this thread: http://www.unicyclist.com/thread/32781