Re: Adjusting to a lighter DH tube

The Munieer said:

* The IRC tube has the all metal valve stem and I rode it with the
lock nut and washer on it. The Specialized has the rubber valve stem
*

I'm guessing but the alll metal stem would probably be a prest and the
one that looks like a car valve stem is schrader.
I don't think that the tube weight would have much if any effect, except
a slight difference in rotational weight.

Not sure what difference 6 o.z. would have on hopping. Perhaps more
pinchflatting due to thinner tubewalls, unless you switched to latex
instead of butyl.
Jeff

--
unidad - level 3 and climbing!

Momma says this is a waste of time.
So who wants to go uni?
------------------------------------------------------------------------
unidad's Profile: http://www.unicyclist.com/profile/8151
View this thread: http://www.unicyclist.com/thread/38898

unidad said:

*I'm guessing but the alll metal stem would probably be a prest and
the one that looks like a car valve stem is schrader.
*

IRC tubes are schrader and are threaded the length of the valve. Most
likely because they are made for DH use. Getting used to the weight
reduction will take time. I went from a tube to tubeless and felt like
I was starting over on the H36.

--
Dirtsurfer - One wheeled

"All we have to decide is what to do with the time that is given to us."
Gandalf the gray
------------------------------------------------------------------------
Dirtsurfer's Profile: http://www.unicyclist.com/profile/2352
View this thread: http://www.unicyclist.com/thread/38898

I think your new wallis cf handle is thowing you off. You should sell
it, $25 sounds like a fair price.

--
onetrack - street rider

Take a look at what I'm wearing, people. You think anybody wants a
roundhouse kick to the face while I'm wearing these bad boys? -Rex kwon
doe

"People over here have a dangerous habit of adding quotes to signature
lines."
-Klaas Bil
------------------------------------------------------------------------
onetrack's Profile: http://www.unicyclist.com/profile/6374
View this thread: http://www.unicyclist.com/thread/38898

these " splitting hairs" on tiny weight differance threads you make are
the greatest 😄

new thread " Helium in the tube"

i think the 4 months off is the reason here though. keep the lighter
tube in there and enjoy the portage.

PS, im a Drastic rider too now 😉

--
jagur - Sealed in Carbonite

Smoke me a kipper, I'll be back for breakfast.
---------------------------------------------------
-forget_your_life-
--------------------------------------
-------*muni militia *-------
*one wheeled death squad*
------------------------------------------------------------------------
jagur's Profile: http://www.unicyclist.com/profile/502
View this thread: http://www.unicyclist.com/thread/38898

The Munieer said:

*Going to the lighter tube has proved to be interesting. When I
appoach a drop, I am having difficulty getting the timing right for
the drop. I can't seem to set up right. I think it is the lack of
weight from the tube and the heavier valve. I think that valve
creates a pulse in the tire that helps in the timing or maybe not. *

Think about the ratio of tube weight to spoke + rim + tube + tire
weight. We're talking a fraction of a percent. Even less in the case
of the valve. Your wheel's moment of inertia changes in direct
proportion to its mass, so there is a fraction of a percent change here
too. Splitting hairs indeed!

For a concrete test, tell us this. Tape a dime (weight, 2.5g) to your
rim, anywhere you like. Go for a ride. Do you notice a difference?

I'd agree that the solution to your dilemma involves a lot more riding,
including many drops. After enough practice you won't even have to
think about the set up. With the weight you're saving from your tube
you could put on a few more ounces of armor for those drops 🙂

--
maestro8 - Mad Scientists for World Domination

Those are my principles. If you don't like those, I have others. --
Groucho Marx
------------------------------------------------------------------------
maestro8's Profile: http://www.unicyclist.com/profile/7871
View this thread: http://www.unicyclist.com/thread/38898

maestro8 said:

*Think about the ratio of tube weight to spoke + rim + tube + tire
weight. We're talking a fraction of a percent. Even less in the case
of the valve. Your wheel's moment of inertia changes in direct
proportion to its mass, so there is a fraction of a percent change
here too. Splitting hairs indeed!

For a concrete test, tell us this. Tape a dime (weight, 2.5g) to your
rim, anywhere you like. Go for a ride. Do you notice a difference?

I'd agree that the solution to your dilemma involves a lot more
riding, including many drops. After enough practice you won't even
have to think about the set up. With the weight you're saving from
your tube you could put on a few more ounces of armor for those drops
🙂 *

We're talking about 6 ounces here; almost 200 grams. That is a
significant amount of rotating weight. (Try 80 dimes instead of one).
Thinner tubes also have different deformation characteristics; they'll
bounce differently.

Still, I'm sure it's just a question of getting used to it.

--
tholub - Kinetic Sculptor
------------------------------------------------------------------------
tholub's Profile: http://www.unicyclist.com/profile/804
View this thread: http://www.unicyclist.com/thread/38898

jagur said:

*these " splitting hairs" on tiny weight differance threads you make
are the greatest 🙂

new thread " Helium in the tube"*

Jagur,
Yeah, I busted up when I read that. As a matter of fact, does anyone
know how I could put helium in the tire?😉

(serious)I was even going to weigh a 26" standard tube that you had
suggested in another thread, just to see if I could save another ounce
or two.

I pronounce my self as - King Weight Wienie

--
The Munieer - One for the...Off Road

Rod Wylie - King Weight Wienie

'MountainUnicyclingLA.com' (http://www.mountainunicycling.us)
'Greater Los Angeles Area Trails - Images' (http://tinyurl.com/4otql)
'Greater Los Angeles Area Trails - Descriptions'
(http://tinyurl.com/6h8zn)

------------------------------------------------------------------------
The Munieer's Profile: http://www.unicyclist.com/profile/736
View this thread: http://www.unicyclist.com/thread/38898

jagur said:

*these " splitting hairs" on tiny weight differance threads you make
are the greatest 🙂

new thread " Helium in the tube"*

Jagur,
Yeah, I busted up when I read that. As a matter of fact, does anyone
know how I could put helium in the tire?😉

(serious)I was even going to weigh a 26" standard tube that you had
suggested in another thread, just to see if I could save another ounce
or two.

I pronounce my self as - King Weight Wienie

--
The Munieer - One for the...Off Road

Rod Wylie - King Weight Wienie

'MountainUnicyclingLA.com' (http://www.mountainunicycling.us)
'Greater Los Angeles Area Trails - Images' (http://tinyurl.com/4otql)
'Greater Los Angeles Area Trails - Descriptions'
(http://tinyurl.com/6h8zn)

------------------------------------------------------------------------
The Munieer's Profile: http://www.unicyclist.com/profile/736
View this thread: http://www.unicyclist.com/thread/38898

On a rtecent Santa Cruz ride we speculated about alternative inflations
for tires, and the general consensus was a hydrogen/helium mix. The
helium would help deter combustion, and the hydrogen would be less
dense.

I like the idea of cutting weight, but I only do it if it's reasonable.
I won't spend an extra $50 in order to cut 2 oz. If it takes me an extra
10 minutes at the mill to cut 1 oz of material, by all means, I'll do
it. For me, time is free.

--
gerblefranklin - Trials Unicyclist

http://gallery.unicyclist.com/Trials-Muni

Nick's main man.

"Democracy is just a word when the people are starving"-Immortal
Technique

* I need a profile hub, any condition, as long as the splines work! (PM
me) *
------------------------------------------------------------------------
gerblefranklin's Profile: http://www.unicyclist.com/profile/4295
View this thread: http://www.unicyclist.com/thread/38898

Drilling holes in your seatpost, crankarms,pedals, seat frame,uniframe.
Shave extra knobbies off the tire then shave down the importants ones.
Grind excess materials anywhere that you can find it. Pull one bearing
out of yur pedals and hubs.
Or take a dump before you ride.🙂
Jeff

--
unidad - level 3 and climbing!

Momma says this is a waste of time.
So who wants to go uni?
------------------------------------------------------------------------
unidad's Profile: http://www.unicyclist.com/profile/8151
View this thread: http://www.unicyclist.com/thread/38898

The Munieer said:

As a matter of fact, does anyone
know how I could put helium in the tire?😉

From a helium bottle. These are commercially available at a pressure
of 200 bars. I have it at work.

The gas volume of a typical 24 x 3" tyre is on the order of 8 litres.
Let's assume you run your tyre at 1.5 bar (that's above ambient
pressure). The mass of air in the tyre would be about 26 grams. The
mass of helium would be about 4 grams. So you save a mere 22 grams.
(With 100% hydrogen you could save another 2 grams.)

Note that (any) gas in the tyre does not effectively count as
/rotating/ mass. Yes, if you ride at a constant speed the gas will
eventually rotate with the tyre, but for any speed variation the gas
will adjust amazingly slowly.

Also note that tubes are not designed to hold helium. The helium will
leak off a lot faster than air.

Klaas Bil - Newsgroup Addict
--
people who unicycle are shyly exhibitionistic - GILD

Klaas Bil said:

*On Wed said:

As a matter of fact, does anyone
know how I could put helium in the tire?😉

From a helium bottle. These are commercially available at a pressure
of 200 bars. I have it at work.

The gas volume of a typical 24 x 3" tyre is on the order of 8
litres.
Let's assume you run your tyre at 1.5 bar (that's above ambient
pressure). The mass of air in the tyre would be about 26 grams. The
mass of helium would be about 4 grams. So you save a mere 22 grams.
(With 100% hydrogen you could save another 2 grams.)

Note that (any) gas in the tyre does not effectively count as
/rotating/ mass. Yes, if you ride at a constant speed the gas will
eventually rotate with the tyre, but for any speed variation the gas
will adjust amazingly slowly.

Also note that tubes are not designed to hold helium. The helium
will
leak off a lot faster than air.

Klaas Bil - Newsgroup Addict
--
people who unicycle are shyly exhibitionistic - GILD *

Rod,
Don't forget to use a vacuum pump to evacuate all the air from the tire
before filling with helium to get the most weight reduction. I want to
be sure you get the full unperceivable benefit of the modifcation.

Scott

--
S_Wallis - MUni Motivated

"I am always doing that which I can not do, in order that I may learn
how to do it." Pablo Picasso
------------------------------------------------------------------------
S_Wallis's Profile: http://www.unicyclist.com/profile/1520
View this thread: http://www.unicyclist.com/thread/38898