Road Cycling · Public discussion

Question about fit

Started by Gary · · Last activity · 9 posts · 566 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Road Cycling
Published
8 March 2008
Last activity
11 March 2008
Original author
Gary
Posts
9
Discussion status
Public discussion
Total views
566
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–9 of 9
Posts remain in their original chronological order.

Text size
  1. I have a chance to get a good deal on a 2007 Madone (60cm) - I'm 6'1". I've
    had back problems and would like to raise the bars by using a higher stem. I
    don't want to use those fake stem raisers. I couldn't find any road stems
    with a high enough angle (31.8 cm, 125 degrees). I did find an aluminum
    mountain stem, however. Is a mountain stem with this angle suitable for a
    road bike? Will I encounter any problems?
    Thanks - Gary

  2. Gary said:

    I have a chance to get a good deal on a 2007 Madone (60cm) - I'm 6'1". I've
    had back problems and would like to raise the bars by using a higher stem.I
    don't want to use those fake stem raisers. I couldn't find any road stems
    with a high enough angle (31.8 cm, 125 degrees). I did find an aluminum
    mountain stem, however. Is a mountain stem with this angle suitable for a
    road bike? Will I encounter any problems?
    Thanks - Gary

    The bar diameter is not the same.

    Joseph

  3. Quoted message said:
    Gary said:

    I have a chance to get a good deal on a 2007 Madone (60cm) - I'm 6'1". I've
    had back problems and would like to raise the bars by using a higher stem. I
    don't want to use those fake stem raisers. I couldn't find any road stems
    with a high enough angle (31.8 cm, 125 degrees). I did find an aluminum
    mountain stem, however. Is a mountain stem with this angle suitable for a
    road bike? Will I encounter any problems?
    Thanks - Gary

    The bar diameter is not the same.

    Joseph

    Oops. I didn't see you specified OS diameter.

    Joseph

  4. "Gary" <[email hidden]> wrote in message
    news:[email hidden]...
    |I have a chance to get a good deal on a 2007 Madone (60cm) - I'm 6'1". I've
    | had back problems and would like to raise the bars by using a higher stem.
    I
    | don't want to use those fake stem raisers. I couldn't find any road stems
    | with a high enough angle (31.8 cm, 125 degrees). I did find an aluminum
    | mountain stem, however. Is a mountain stem with this angle suitable for a
    | road bike? Will I encounter any problems?
    | Thanks - Gary

    Gary:

    Torelli makes some very nice-looking 35-degree-rise stems, in 31.8mm, that
    might be just the ticket. We sell & use many of them.

    But what we really need to know is how much "drop", if any, you prefer from
    the top of the seat to the top of the bars. You can easily figure this by
    simply measuring from the top of the saddle to the ground, then the top of
    the bars to the ground, and subtract the difference. With that information I
    can mock it up on a bike on our floor and tell you if it looks reasonable.
    Heck, I don't even have to do it at the shop; my own bike is a 60cm Madone.

    --Mike-- Chain Reaction Bicycles
    www.ChainReactionBicycles.com

  5. http://www.bikeforums.net/archive/index.php/t-54900.html

    why are cyclists disagreeable?

  6. In article <[email hidden]>,

    datakoll said:


    http://www.bikeforums.net/archive/index.php/t-54900.html

    why are cyclists disagreeable?

    "They" put something in Clif bars & Gu.

    cheers,
    Tom

    --
    Nothing is safe from me.
    I'm really at:
    tkeats curlicue vcn dot bc dot ca

  7. exceesive pressure on the small intestine, a kink in the assending
    colon, bent nueronal sheaths more likely

  8. In article <[email hidden]>,

    datakoll said:

    exceesive pressure on the small intestine, a kink in the assending
    colon, bent nueronal sheaths more likely

    That's what the stuff "They" step-on Clif bars & Gu with, does.
    Except for the bent neuronal sheaths. That's caused by inhaling
    tour bus & stretch limousine exhaust fumes, too much TV, and
    drinking beer out of aluminum cans.

    I vaguely recall a PBS-or-something program about an art form
    where huge, artsie-fartsie robots are constructed and programmed
    to just slowly & meticulously take themselves apart and unbuild
    themselves. I've noted how cyclists can be like that with each other.

    Life is a curious wonderment.

    cheers,
    Tom

    --
    Nothing is safe from me.
    I'm really at:
    tkeats curlicue vcn dot bc dot ca

  9. In article <[email hidden]>, [email hidden] (Tom Keats)

    Quoted message said:

    In article
    <[email hidden]>,

    datakoll said:

    exceesive pressure on the small intestine, a kink in the assending
    colon, bent nueronal sheaths more likely

    That's what the stuff "They" step-on Clif bars & Gu with, does.
    Except for the bent neuronal sheaths. That's caused by inhaling
    tour bus & stretch limousine exhaust fumes, too much TV, and
    drinking beer out of aluminum cans.

    I vaguely recall a PBS-or-something program about an art form
    where huge, artsie-fartsie robots are constructed and programmed
    to just slowly & meticulously take themselves apart and unbuild
    themselves. I've noted how cyclists can be like that with each other.

    Are you speaking of Survival Research Labs?

    http://srl.org/

    --
    Ryan Cousineau [email hidden] http://www.wiredcola.com/
    "In other newsgroups, they killfile trolls."
    "In rec.bicycles.racing, we coach them."

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.