New bike, new setup, lower back pain.
Typical solutions? Point me to a FAQ.
MikeE
A community for cyclists, gear, training and racing.
Road Cycling · Public discussion
This thread is locked and is currently read-only.
Thread navigation
Go to the original post, the replies on this page, or the latest preserved contribution.
Thread details
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
New bike, new setup, lower back pain.
Typical solutions? Point me to a FAQ.
MikeE
In article <[email hidden]>, Mike Elliott
Quoted message said:New bike, new setup, lower back pain.
Typical solutions? Point me to a FAQ.
Quickest way out is to analyze the difference between new bike and old bike with a measuring tape
and use that information to correct the fit. Still got the old one? Always best to write that stuff
down before you get rid of it.
Everybody's different, so tough to do a true FAQ on fit. Have you had somebody observe you while
riding? How did you go about getting fit on the new bike? Did the person fitting you pay attention
to how you ride, or just have a magical set of numbers that ought to work for anybody?
Do you still have the old bike, so you can compare the changes? Specifically, I'd look at the
following-
How far behind the crank is the saddle? What is the distance from saddle to handlebar? How much drop
from the saddle to handlebar? If you get those things dialed in the same, you've pretty much covered
the basis for setup-oriented changes that might cause back problems.
One more thing to look at- make sure your seat is level. A nose-down saddle, sometimes even slightly
so, can cause major back grief (although more commonly issues in the neck & shoulders) because
you're actually spending the entire time on the bike pushing back from the bars in order to maintain
your position on the bike.
Another thing to consider- are you riding different terrain now than before, or perhaps with
different people? If you're suddenly doing a lot more climbing, and remain in a seated position the
whole time, that can cause back issues. Good idea to force yourself to stand up every couple minutes
or so, *before* you feel any issues. Once you begin to feel back pain, it's much more difficult to
get rid of it than it is to prevent it in the first place.
--Mike-- Chain Reaction Bicycles chainreactionbicycles.comchainreactionbicycles.comOpen ↗
"Mike Elliott" <[email hidden]> wrote in message
"]news:[email hidden]...
Quoted message said:New bike, new setup, lower back pain.
Typical solutions? Point me to a FAQ.
MikeE
"Mike Elliott" <[email hidden]> wrote in message
"]news:[email hidden]...
Quoted message said:New bike, new setup, lower back pain.
Typical solutions? Point me to a FAQ.
MikeE
There are a variety of possible causes. I replaced a bike that was comfortable to me for many years
with a custom bike because of lower back pain. My lower back problems have most to do with my tight
hamstrings. Simple stretching exercises before and during a ride help me considerably.
This link might help you: geocities.comraschultz 2000Open ↗
In article <[email hidden]>, mikej1 @ix.netcom.com writes
compellingly...
Quoted message said:Everybody's different, so tough to do a true FAQ on fit. Have you had somebody observe you while
riding? How did you go about getting fit on the new bike? Did the person fitting you pay attention
to how you ride, or just have a magical set of numbers that ought to work for anybody?Do you still have the old bike, so you can compare the changes? Specifically, I'd look at the
following-How far behind the crank is the saddle? What is the distance from saddle to handlebar? How much
drop from the saddle to handlebar? If you get those things dialed in the same, you've pretty much
covered the basis for setup-oriented changes that might cause back problems.One more thing to look at- make sure your seat is level. A nose-down saddle, sometimes even
slightly so, can cause major back grief (although more commonly issues in the neck & shoulders)
because you're actually spending the entire time on the bike pushing back from the bars in order
to maintain your position on the bike.Another thing to consider- are you riding different terrain now than before, or perhaps with
different people? If you're suddenly doing a lot more climbing, and remain in a seated position
the whole time, that can cause back issues. Good idea to force yourself to stand up every couple
minutes or so, *before* you feel any issues. Once you begin to feel back pain, it's much more
difficult to get rid of it than it is to prevent it in the first place.--Mike-- Chain Reaction Bicycles chainreactionbicycles.comchainreactionbicycles.comOpen ↗
Hi Mike,
The earlier posting, and your's, too, both suggested that I measure my old bike to see how to set
this one up.
To which I respond, "Oh yeah. Duh."
Thanks.
MikeE
In article <[email hidden]>, [email hidden]
writes compellingly...
Quoted message said:
"Mike Elliott" <[email hidden]> wrote in message
"]news:[email hidden]...Quoted message said:New bike, new setup, lower back pain.
Typical solutions? Point me to a FAQ.
MikeE
There are a variety of possible causes. I replaced a bike that was comfortable to me for many
years with a custom bike because of lower back pain. My lower back problems have most to do with
my tight hamstrings. Simple stretching exercises before and during a ride help me considerably.This link might help you: geocities.comraschultz 2000Open ↗
Good stuff - thanks!
MikeE
If the bike fits, then ride the bike. The "gosh I'm using my muscle" pain will go away with time
and riding.
Mike Elliott <[email hidden]> wrote in message
news:<[email hidden]>...
Quoted message said:New bike, new setup, lower back pain.
Typical solutions? Point me to a FAQ.
MikeE
Active in the last 60 minutes
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.