The part I'm looking for is a spacer type thing that is connected to the crank and then the pedal attaches to this extender. This causes the pedal to be mounted a certain distance away (outward) from the usual position. I hoping that by doing this some pain in my legs, knee and hip might be alleviated. I spoken with my local bike shop who tell me they never heard of such a thing. I pretty sure I did see this in a bicycle magazine about a year or two ago. I would like to know if there is such a thing and if so where can I get a set. Thanks for you help. Bert Halifax Nova Scotia.
The part I'm looking for is a spacer type thing that is connected to the crank and then the pedal attaches to this extender. This causes the pedal to be mounted a certain distance away (outward) from the usual position. I hoping that by doing this some pain in my legs, knee and hip might be alleviated. I spoken with my local bike shop who tell me they never heard of such a thing. I pretty sure I did see this in a bicycle magazine about a year or two ago. I would like to know if there is such a thing and if so where can I get a set. Thanks for you help. Bert Halifax Nova Scotia.
More likely you just need a pedal with more float. If your legs can't fall into a natural position, then stuff will hurt.
If speedplay's road pedals are anything like their offroad ones, they're really freefloating, which will feel kidna sketchy at first, but you'll get used to them in no time and it will probably fix the problem.
Also make sure that your cleats are mounted correctly!!! I'd have a physical therapist who specializes in bicycles check out your riding position, they're the ones who will tell you whats going wrong. They can probably giv eyou excercises to do that will help alleviate pain too.
You might also try 3 mm spacers between the pedal and crankarm.
Bert LeRue said:
Please Help!
The part I'm looking for is a spacer type thing that is connected to the crank and then the pedal attaches to this extender. This causes the pedal to be mounted a certain distance away (outward) from the usual position. I hoping that by doing this some pain in my legs, knee and hip might be alleviated. I spoken with my local bike shop who tell me they never heard of such a thing. I pretty sure I did see this in a bicycle magazine about a year or two ago. I would like to know if there is such a thing and if so where can I get a set. Thanks for you help. Bert Halifax Nova Scotia.
"Bert LeRue" <[email hidden]> wrote in message news:<[email hidden]>...
Quoted message said:
Please Help!
The part I'm looking for is a spacer type thing that is connected to the crank and then the pedal attaches to this extender. This causes the pedal to be mounted a certain distance away (outward) from the usual position. I hoping that by doing this some pain in my legs, knee and hip might be alleviated. I spoken with my local bike shop who tell me they never heard of such a thing. I pretty sure I did see this in a bicycle magazine about a year or two ago. I would like to know if there is such a thing and if so where can I get a set. Thanks for you help. Bert Halifax Nova Scotia.
They're called Kneesavers: bikescor.comknee.htmOpen ↗ You'll have to do some searching on your own to find a Canadian supplier if you don't want to order them direct from California.
The part I'm looking for is a spacer type thing that is connected to the crank and then the pedal attaches to this extender. This causes the pedal to be mounted a certain distance away (outward) from the usual position. I hoping that by doing this some pain in my legs,
I did an end run and switched to BMX flats. The Haro greens are about forty bucks, roughly the size of Texas and about as light as you can get.
I've got wider-than-usual hips and a correspondingly wide stance. A couple of nagging problems went away once I switched and, sure enough, every time I look down, my feet have found a place about 3/4" to 1" out from the cranks.
I'd be afraid of kneesavers based on the advice of an LBS manager who thought they would increase the likelihood of a crank failure. My feeling is that a crank failure under load can be extremely hazardous to one's health. ----------------------- PeteCresswell
I've got wider-than-usual hips and a correspondingly wide stance. A couple of nagging problems went away once I switched and, sure enough, every time I look down, my feet have found a place about 3/4" to 1" out from the cranks.
I'd be afraid of kneesavers based on the advice of an LBS manager who thought they would increase the likelihood of a crank failure. My feeling is that a crank failure under load can be extremely hazardous to one's health.
wrong thinking: the effective moment arm is in both cases the same. The load on the crank-eye therefore isn't any different.
For the same reason I am using the kneesavers for years without any problem on my recumbent.They are a good product. "(Pete Cresswell)" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:
RE/
Quoted message said:
The part I'm looking for is a spacer type thing that is connected to the crank and then the pedal attaches to this extender. This causes the pedal
to
Quoted message said:
Quoted message said:
be mounted a certain distance away (outward) from the usual position. I hoping that by doing this some pain in my legs,
I did an end run and switched to BMX flats. The Haro greens are about
forty
Quoted message said:
bucks, roughly the size of Texas and about as light as you can get.
I've got wider-than-usual hips and a correspondingly wide stance. A couple of nagging problems went away once I switched and, sure enough,
every
Quoted message said:
time I look down, my feet have found a place about 3/4" to 1" out from the cranks.
I'd be afraid of kneesavers based on the advice of an LBS manager who
thought
Quoted message said:
they would increase the likelihood of a crank failure. My feeling is
that a
Quoted message said:
crank failure under load can be extremely hazardous to one's health. ----------------------- PeteCresswell
