Road Cycling · Public discussion

Pearl AmFIB Lobster Glove?

Started by dgk · · Last activity · 7 posts · 464 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Road Cycling
Published
15 December 2004
Last activity
16 December 2004
Original author
dgk
Posts
7
Discussion status
Public discussion
Total views
464
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–7 of 7
Posts remain in their original chronological order.

Text size
  1. Do I just bite the bullet and buy these for $60? I mean, my fingers
    freeze in cold weather.

    http://www.nashbar.com/profile.cfm?category=140&subcategory=1225&brand=&sku=12405&storetype=&estoreid=&pagename=

    Or perhaps the Nashbar Lobster Mitt for $30? Seems like the stated
    imitation.

    http://www.nashbar.com/profile.cfm?category=140&subcategory=1225&brand=&sku=5363&storetype=&estoreid=&pagename=

    The electric gloves that I bought are actually pretty good (if I can
    find them - different thread) again, but only the palm is heated and
    that isn't my problem. I end up riding with my fingers in the palms
    and the fingers hanging over the handlebars.

    I have grip shifts so I really could just do with mittens.

  2. dgk said:

    Do I just bite the bullet and buy these for $60? I mean, my fingers
    freeze in cold weather.

    http://www.nashbar.com/profile.cfm?category=140&subcategory=1225&brand=&sku=12405&storetype=&estoreid=&pagename=

    Or perhaps the Nashbar Lobster Mitt for $30? Seems like the stated
    imitation.

    http://www.nashbar.com/profile.cfm?category=140&subcategory=1225&brand=&sku=5363&storetype=&estoreid=&pagename=

    The electric gloves that I bought are actually pretty good (if I can
    find them - different thread) again, but only the palm is heated and
    that isn't my problem. I end up riding with my fingers in the palms
    and the fingers hanging over the handlebars.

    I have grip shifts so I really could just do with mittens.

    Are these PA the same? They're $20 cheaper:

    http://www.performancebike.com/shop/profile.cfm?SKU=15813

  3. dgk said:

    Do I just bite the bullet and buy these for $60? I mean, my fingers
    freeze in cold weather.

    Lobster gloves are the business in weather down to around -5 Celsius.
    It never gets much colder than that around here, so I can't say below
    that.

    Guy
    --
    May contain traces of irony. Contents liable to settle after posting.
    http://www.chapmancentral.co.uk

    88% of helmet statistics are made up, 65% of them at CHS, Puget Sound

  4. "dgk" wrote ...

    Quoted message said:

    Do I just bite the bullet and buy these for $60? I mean, my fingers
    freeze in cold weather.

    Or perhaps the Nashbar Lobster Mitt for $30? Seems like the stated
    imitation.

    The electric gloves that I bought are actually pretty good (if I can
    find them - different thread) again, but only the palm is heated and
    that isn't my problem. I end up riding with my fingers in the palms
    and the fingers hanging over the handlebars.

    I have grip shifts so I really could just do with mittens.

    The Pearl Izumi Lobster Glove is awfully good. Mine were adequate for a ride
    home in -20 deg F temperatures last winter (-29 deg C for metric people).

    I suspect that the Nashbar Lobster Mitt is not going to last nearly as long
    as the PI item, nor would I expect it to be as comfortable.

    When my Lobster Mitts finally fell apart last spring, I replaced them with
    P-I's new 3-fingered offering, which puts the first two fingers in
    individual finger wrappings, and puts the ring and pinky fingers together to
    keep them warm. Definitely offers more dexterity than the original Lobster,
    nice for unlocking the bike, etc., but more expensive and (I expect) no
    warmer than the original Lobster.
    --
    mark

  5. I've used the PI Lobster for a decade. And they are the same pair! That
    works out to around $5 a year and they are still in good shape. Initial
    cost and final cost are not always the same thing,

  6. dgk said:

    Do I just bite the bullet and buy these for $60? I mean, my fingers
    freeze in cold weather.

    http://www.nashbar.com/profile.cfm?category=140&subcategory=1225&brand=&sku=12405&storetype=&estoreid=&pagename=

    Or perhaps the Nashbar Lobster Mitt for $30? Seems like the stated
    imitation.

    http://www.nashbar.com/profile.cfm?category=140&subcategory=1225&brand=&sku=5363&storetype=&estoreid=&pagename=

    The electric gloves that I bought are actually pretty good (if I can
    find them - different thread) again, but only the palm is heated and
    that isn't my problem. I end up riding with my fingers in the palms
    and the fingers hanging over the handlebars.

    I have grip shifts so I really could just do with mittens.

    I just got the Nashbar imitations yesterday, and rode in with them today
    (at 20F, half an hour, little wind). My fingertips were cool, not cold
    like they were yesterday at 27F in ordinary winter bike gloves (is there
    such a thing, with that many qualifiers?). I have Campy Ergo brifters
    instead of grip shifts. I had to retrain myself just a bit -- I usually
    shift with my middle finger to downshift, but had to change to the index
    finger. No problems with braking or upshifting. And of course they're
    on sale for $10 off right now. I'd recommend them for cold weather.

    But of course, that assumes you already have tights, windproof jacket,
    something warm under the jacket, and either a balaclava or cap and scarf
    on your head and throat.

    That was the coldest I've cycled in. I think I could go down another 10
    degrees for as long as I could ride with a warmer middle layer on my
    torso and something to cut the wind on my feet.

    Pat

  7. Pat Lamb said:
    dgk said:

    Do I just bite the bullet and buy these for $60? I mean, my fingers
    freeze in cold weather.

    http://www.nashbar.com/profile.cfm?category=140&subcategory=1225&brand=&sku=12405&storetype=&estoreid=&pagename=

    Or perhaps the Nashbar Lobster Mitt for $30? Seems like the stated
    imitation.

    http://www.nashbar.com/profile.cfm?category=140&subcategory=1225&brand=&sku=5363&storetype=&estoreid=&pagename=

    The electric gloves that I bought are actually pretty good (if I can
    find them - different thread) again, but only the palm is heated and
    that isn't my problem. I end up riding with my fingers in the palms
    and the fingers hanging over the handlebars.

    I have grip shifts so I really could just do with mittens.

    I just got the Nashbar imitations yesterday, and rode in with them today
    (at 20F, half an hour, little wind). My fingertips were cool, not cold
    like they were yesterday at 27F in ordinary winter bike gloves (is there
    such a thing, with that many qualifiers?). I have Campy Ergo brifters
    instead of grip shifts. I had to retrain myself just a bit -- I usually
    shift with my middle finger to downshift, but had to change to the index
    finger. No problems with braking or upshifting. And of course they're
    on sale for $10 off right now. I'd recommend them for cold weather.

    But of course, that assumes you already have tights, windproof jacket,
    something warm under the jacket, and either a balaclava or cap and scarf
    on your head and throat.

    That was the coldest I've cycled in. I think I could go down another 10
    degrees for as long as I could ride with a warmer middle layer on my
    torso and something to cut the wind on my feet.

    Pat

    I ordered the ones from Performance. I'm not clear on the difference
    but I don't live in the Arctic Circle. For $45, plus the polypropylene
    liner, they'd best be sufficient for NYC. Now, about the face...

    I'm sort of bummed about the battery powered gloves. They should work
    but I guess it is too tough to get the heating element into the
    fingers. And I don't even need gloves; with grip shifts mittens would
    be fine. There should be no problem making this work with mittens. But
    there should be a convenient on/off switch. I think I'll look at some
    mittens and then visit Radio Shack. I can see my fortune arriving as
    we speak. A thin overliner of PVC for optional rain protection and we
    have a winner.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.