Painting Question

ken hovanes said:

I would like to get my LiteSpeed painted, and I was looking for
suggestions from those of you who may have had a custom paint job done
in the past. Any recommendations?

Thanks,

Ken Hovanes

CyclArt, in the San Diego area. Not especially cheap, but good
work.

www.cyclart.com

DH

ken hovanes said:

I would like to get my LiteSpeed painted, and I was looking for
suggestions from those of you who may have had a custom paint job done
in the past. Any recommendations?

Thanks,

Ken Hovanes

Joe Bell Bicycle Refinishing, > http://www.campyonly.com/joebell.html.

Not cheap, but he did a beautiful job on my tourer.

mark

If you got the money, CyclArt is the "Chip Foose" of bike painting.

http://www.cyclart.com/

- -
Compliments of:
"Your Friendly Neighborhood Wheelman"

If you want to E-mail me use:
ChrisZCorner "at" webtv "dot" net

My website:
http://geocities.com/czcorner

ken hovanes said:

I would like to get my LiteSpeed painted, and I was looking for
suggestions from those of you who may have had a custom paint job done
in the past. Any recommendations?

Litespeeds are ti, right?

http://www.mrtitanium.com/

-M

bring it to auto body painting shop

tell them when they have a imron paint job ( of your color imron is a
flexible paint from dupont--chatulue it) ask them to paint it

hth

peter

<[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

ken hovanes said:

I would like to get my LiteSpeed painted, and I was looking for
suggestions from those of you who may have had a custom paint job done
in the past. Any recommendations?

Litespeeds are ti, right?

http://www.mrtitanium.com/

-M

"ilaboo" <[email hidden]> wrote in message
news:hH99j.792$1X.309@trndny07...

Quoted message said:

bring it to auto body painting shop

tell them when they have a imron paint job ( of your color imron is a
flexible paint from dupont--chatulue it) ask them to paint it

Imron or Endura or Awlgrip, these are polyester urethanes that are in fact
extremely tough. I would take it to a shope specializing in bike and
motorbike frames. The flat panels of most vehicles don't give a sprayman the
experience it takes to do finer work on a frame. For pure durability I'd go
with fusion bonded urethane (powder coat) there are many shops around and
the finish is almost always flawless if the place is well run.

Quoted message said:

hth

peter

<[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

ken hovanes said:

I would like to get my LiteSpeed painted, and I was looking for
suggestions from those of you who may have had a custom paint job done
in the past. Any recommendations?

Litespeeds are ti, right?

http://www.mrtitanium.com/

-M