Opinion: Build-up Order

Mark Robinson said:

Is there a best or most logical order in building up a bike from a naked frame? I have the
headset and fork installed and the bottom bracket it. What's next? Breaks? Der's? Any suggested
plan of attack?

Cranks before front der. Order of the rest of it hardly matters. You do what you like.

Don't shorten cables too much to start with, and grease everything.

~PB

Mark Robinson said:

Is there a best or most logical order in building up a bike from a naked frame? I have the
headset and fork installed and the bottom bracket it. What's next? Breaks? Der's? Any suggested
plan of attack?

I did this recently (road bike) and kept notes. First time for me so I just did what seemed to
make sense.

Headset Fork Wheelset Stem and Bar Seatpost and Saddle Shift Levers (downtube) Bottom Bracket
Crankset Rear Derailleur Front Derailleur Pedals Chain Derailleur Cables Brakes Brake Levers
Brake Cables

Obviously, YMMV.

Luck, Pann
--
geek by nature, Linux by choice L I N U X .~. The Choice /V\ ourmanpann.comlinuxOpen ↗ of a
GNU /( )\ Generation ^^-^^

"Mark Robinson" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Is there a best or most logical order in building up a bike from a naked frame? I have the
headset and fork installed and the bottom bracket it. What's next? Breaks? Der's? Any suggested
plan of attack?

I generally try and start at the front of the bike and move towards the back.

Mike

Sheldon Brown said:

Quoted message said:

Mark Robinson said:

Is there a best or most logical order in building up a bike from a naked frame? I have the
headset and fork installed and the bottom bracket it. What's next? Breaks? Der's? Any suggested
plan of attack?

Sheldon "Squash The Cable Caps So The Flats Are In Line With The Air Flow" Brown

Sheldon,

Since my top gear is only a 48x12, would doing this help me catch Eddy Merckx in our next sprint to
the frites stand?

Trent, dreaming of the Low Countries

Quoted message said:

Mark Robinson said:

Is there a best or most logical order in building up a bike from a naked frame? I have the
headset and fork installed and the bottom bracket it. What's next? Breaks? Der's? Any suggested
plan of attack?

Pete Biggs said:

Cranks before front der. Order of the rest of it hardly matters. You do what you like.

Don't shorten cables too much to start with, and grease everything.

Brake calipers/cantilevers before wheels, except for final tighening of caliper mounting bolts.
Easier to swing the wrench when the wheels aren't in place.

For STI bikes, install the brake cables, then tape the bars, then install the gear cables.

On the stand, I install the stem noticeably crooked so I'll remember to center and tighten it after
the wheels are in.

Grease everything.

Sheldon "Squash The Cable Caps So The Flats Are In Line With The Air Flow" Brown
+--------------------------------------------+
| To see what is in front of one's nose | needs a constant struggle | --George Orwell |
+--------------------------------------------+ Harris Cyclery, West Newton, Massachusetts Phone
617-244-9772 FAX 617-244-1041 harriscyclery.comharriscyclery.comOpen ↗ Hard-to-find parts shipped Worldwide
captainbike.comcaptainbike.comOpen ↗ sheldonbrown.comsheldonbrown.comOpen ↗

mark-<< Is there a best or most logical order in building up a bike from a naked frame? I have the
headset and fork installed and the bottom bracket it. What's next? Breaks? Der's? Any suggested plan
of attack?

Frameset been prepped? faced and all threads chased?

I do the BB, the HS, the crank, the fork, the ders, the brakes...doesn't really matter as long as
the stuff is installed correctly...

Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali costruite eccezionalmente bene"

Seatpost to clamp the bike. Rear derailleur and brakes. Bars, stabalized so they don't swing and
contact toptube. Shifters with cables. Housing attached with some electrical tape to bar. Cables
attachment. Rear wheel with cassette. Size chain over big-big combintaion. Attach front derailleur
to frame and cable. Install chain. Adjust derailleurs. Install front wheel. Adjust brakes front and
rear. Tape the bars.

Mark Robinson said:

Is there a best or most logical order in building up a bike from a naked frame? I have the
headset and fork installed and the bottom bracket it. What's next? Breaks? Der's? Any suggested
plan of attack?

I wrote the invaluable advice:

"Squash The Cable Caps So The Flats Are In Line With The Air Flow"

trent gregory hill said:

Since my top gear is only a 48x12, would doing this help me catch Eddy Merckx in our next sprint
to the frites stand?

I can't guarantee that this will let you catch Fast Eddy, but can assure you that if you _don't_ do
it, you won't have a chance!

Sheldon "Attension To Detail" Brown +-----------------------------------------------+
| ...there is humour in all things and the | truest philosophy is that which teaches | us to find
| it and make the most of it. | --W.S.Gilbert |
+-----------------------------------------------+ Harris Cyclery, West Newton, Massachusetts Phone
617-244-9772 FAX 617-244-1041 harriscyclery.comharriscyclery.comOpen ↗ Hard-to-find parts shipped Worldwide
captainbike.comcaptainbike.comOpen ↗ sheldonbrown.comsheldonbrown.comOpen ↗

Nope, No cable ends. Brush Crazy glue on ends of cut cable.

Quoted message said:

I wrote the invaluable advice:

"Squash The Cable Caps So The Flats Are In Line With The Air Flow"

trent gregory hill wrote:

Paul Kopit said:

Nope, No cable ends. Brush Crazy glue on ends of cut cable.

NO, no, NOOOO! The inevitable wrinkles in the glue's surface set up a nasty standing wave of eddy
currents in the air flowing over the ends of the cable. This swirling 1mm wide mass of disturbed air
plays havoc with the airflow over your shaved calf.

Mark Hickey Habanero Cycles habcycles.comhabcycles.comOpen ↗ Home of the $695 ti frame