Old Manitou elastomers wanted!!

"Eurastus" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

I've got a pair of the original Answer Manitou forks. They don't have a

model

Quoted message said:

number or name. These are the first suspension forks Answer produced back

in

Quoted message said:

the late 80's-early 90's, before the Manitou 2.

<snip>

Quoted message said:

Before I do that, I'm looking for advice from the community on any ideas

where

Quoted message said:

I might find a replacement set...or something that will fit.

According to the manual that came with these, what I'm looking for are

Answer

Quoted message said:

part numbers 040164 and 040197 ( ought to replace the shorter elastomers

as

Quoted message said:

well since they don't look too good either). There is also a "Soft Ride"

kit

Quoted message said:

listed as part number 85-3501 and a "Firm Ride" kit is 85-3502. Frankly,

the

Quoted message said:

latter would be fine as well---I don't weigh quite what I did when these

were

Quoted message said:

new...

I ran into a similar problem with a different fork. My solution was to replace the elastomers with
springs made by mountainspeed. I would contact them ([email hidden]) and ask what they might
have as a replacement. Of course, their website is www.mountainspeed.com

Good luck! -Buck

"Buck" <j u n k m a i l @ g a l a x y c o r p . c o m> wrote in message
"]news:[email hidden]...

Quoted message said:

"Eurastus" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

I've got a pair of the original Answer Manitou forks. They don't have a

model

Quoted message said:

number or name. These are the first suspension forks Answer produced

back

Quoted message said:

in

Quoted message said:

the late 80's-early 90's, before the Manitou 2.

<snip>

Quoted message said:

Before I do that, I'm looking for advice from the community on any ideas

where

Quoted message said:

I might find a replacement set...or something that will fit.

According to the manual that came with these, what I'm looking for are

Answer

Quoted message said:

part numbers 040164 and 040197 ( ought to replace the shorter elastomers

as

Quoted message said:

well since they don't look too good either). There is also a "Soft

Ride"

Quoted message said:

kit

Quoted message said:

listed as part number 85-3501 and a "Firm Ride" kit is 85-3502.

Frankly,

Quoted message said:

the

Quoted message said:

latter would be fine as well---I don't weigh quite what I did when these

were

Quoted message said:

new...

I ran into a similar problem with a different fork. My solution was to replace the elastomers with
springs made by mountainspeed. I would contact them ([email hidden]) and ask what they
might have as a

replacement.

Quoted message said:

Of course, their website is www.mountainspeed.com

Good luck! -Buck

Eko Sport might still have some of the first edition Englund Air Cartridges for your fork....
www.ekosport.com

The MountainSpeed Speed Springs and Englund cartridges will be a big improvement over the elastomers
your fork came with.

Also, your LBD might be able to locate a fork crown with a 1" steerer tube for a later model fork.
If you can find a used fork in good condition and get a 1" steerer/fork crown assembly, you can get
your bike back on the trails fairly inexpensively.

Good luck with your search!

Stuart Ground Zero Cycles [email hidden]

Eurastus said:

I've got a pair of the original Answer Manitou forks. They don't have a model number or name.
These are the first suspension forks Answer produced back in the late 80's-early 90's, before the
Manitou 2.

I was out on a ride with the kids the other day and heard a ripping sound come from one of the
fork legs when I hit a moderate bump. This was immediately followed by the same sound from the
other leg. The fork bottomed out and I knew I had problems. I took the fork apart and discovered
the longer red elastomers in both legs had split down the length, exposing the long Allen bolt
running through them. I called Answer this morning to find if they still stocked replacements but
the tech on the phone practically laughed at me when I mentioned how old these are. He suggested
I" get with the program and buy something less than a decade old".

Well, fine...not what I wanted to hear. The fork is mounted on an older Slingshot with a 1"
steerer and all the forks I can find in the 1" size these days are very low-end. Besides that,
this bike does not have V-brakes and frankly I don't want to replace 1/2 the parts on the
bike...maybe even more if I need a 1 1/8" steerer frame.

I've got the split elastomers in my pocket, prepared to visit every LBS in a 50-mile radius just
on the off chance they have something in the junk drawer that might fit.

Before I do that, I'm looking for advice from the community on any ideas where I might find a
replacement set...or something that will fit.

According to the manual that came with these, what I'm looking for are Answer part numbers 040164
and 040197 ( ought to replace the shorter elastomers as well since they don't look too good
either). There is also a "Soft Ride" kit listed as part number 85-3501 and a "Firm Ride" kit is
85-3502. Frankly, the latter would be fine as well---I don't weigh quite what I did when these
were new...

Ideas?

Have you called Answer/Manitou?

I think Loose Screws used to sell these. They were out of business, but up and running again, or
someone bought their stock and took over, etc. So you might look them up too. I've gotten a lot of
weird old Rockshox parts from them over the years.

Matt O.

Eurastus said:

I've got the split elastomers in my pocket, prepared to visit every LBS in a 50-mile radius just on
the off chance they have something in the junk drawer that might fit.

Before I do that, I'm looking for advice from the community on any ideas where I might find a
replacement set...or something that will fit.

Believe it or not, I have a few of the things still sitting around (I bought 'em to have in stock
when I was going overseas for a while, and then upgraded the fork). They were for the Manitou 4/5
I believe.

Drop me a line and we'll see if there's some sort of trade we can do.

Mark Hickey Habanero Cycles habcycles.comhabcycles.comOpen ↗ Home of the $695 ti frame

Yes, I called Answer--read my original message. I'll try Loose Screws; that's good advice.

Thanks for your help.

Matt O'Toole said:

Eurastus said:

I've got a pair of the original Answer Manitou forks. They don't have a model number or name.
These are the first suspension forks Answer produced back in the late 80's-early 90's, before the
Manitou 2.

I was out on a ride with the kids the other day and heard a ripping sound come from one of the
fork legs when I hit a moderate bump. This was immediately followed by the same sound from the
other leg. The fork bottomed out and I knew I had problems. I took the fork apart and discovered
the longer red elastomers in both legs had split down the length, exposing the long Allen bolt
running through them. I called Answer this morning to find if they still stocked replacements but
the tech on the phone practically laughed at me when I mentioned how old these are. He suggested
I" get with the program and buy something less than a decade old".

Well, fine...not what I wanted to hear. The fork is mounted on an older Slingshot with a 1"
steerer and all the forks I can find in the 1" size these days are very low-end. Besides that,
this bike does not have V-brakes and frankly I don't want to replace 1/2 the parts on the
bike...maybe even more if I need a 1 1/8" steerer frame.

I've got the split elastomers in my pocket, prepared to visit every LBS in a 50-mile radius just
on the off chance they have something in the junk drawer that might fit.

Before I do that, I'm looking for advice from the community on any ideas where I might find a
replacement set...or something that will fit.

According to the manual that came with these, what I'm looking for are Answer part numbers 040164
and 040197 ( ought to replace the shorter elastomers as well since they don't look too good
either). There is also a "Soft Ride" kit listed as part number 85-3501 and a "Firm Ride" kit is
85-3502. Frankly, the latter would be fine as well---I don't weigh quite what I did when these
were new...

Ideas?

Have you called Answer/Manitou?

I think Loose Screws used to sell these. They were out of business, but up and running again, or
someone bought their stock and took over, etc. So you might look them up too. I've gotten a lot of
weird old Rockshox parts from them over the years.

Matt O.

Thanks Mark, I'll do that. Unfortunately, I left them at home this morning--I don't have them with
me to measure, etc. I'll remember to bring them tomorrow and call you.

Thanks for the help,

Eurastus.

Mark Hickey said:

Eurastus said:

I've got the split elastomers in my pocket, prepared to visit every LBS in a 50-mile radius just
on the off chance they have something in the junk drawer that might fit.

Before I do that, I'm looking for advice from the community on any ideas where I might find a
replacement set...or something that will fit.

Believe it or not, I have a few of the things still sitting around (I bought 'em to have in stock
when I was going overseas for a while, and then upgraded the fork). They were for the Manitou 4/5
I believe.

Drop me a line and we'll see if there's some sort of trade we can do.

Mark Hickey Habanero Cycles habcycles.comhabcycles.comOpen ↗ Home of the $695 ti frame

Thanks Mark, I'll do that. Unfortunately, I left them at home this morning--I don't have them with
me to measure, etc. I'll remember to bring them tomorrow and call you.

Thanks for the help,

Eurastus.

Mark Hickey said:

Eurastus said:

I've got the split elastomers in my pocket, prepared to visit every LBS in a 50-mile radius just
on the off chance they have something in the junk drawer that might fit.

Before I do that, I'm looking for advice from the community on any ideas where I might find a
replacement set...or something that will fit.

Believe it or not, I have a few of the things still sitting around (I bought 'em to have in stock
when I was going overseas for a while, and then upgraded the fork). They were for the Manitou 4/5
I believe.

Drop me a line and we'll see if there's some sort of trade we can do.

Mark Hickey Habanero Cycles habcycles.comhabcycles.comOpen ↗ Home of the $695 ti frame

In article <[email hidden]>, Matt O'Toole

Quoted message said:

I think Loose Screws used to sell these. They were out of business, but up and running again, or
someone bought their stock and took over, etc.

Actually they closed the business and then decided to reopen it some months later, mostly
eliminating the tools from their catalog.

--Paul

In article <[email hidden]>, Ground Zero

Quoted message said:

Also, your LBD might be able to locate a fork crown with a 1" steerer tube for a later model fork.

Should be able to find new Marzocchi 1" threadless forks, and RST as well. Whether they will screw
up the geometry significantly is another question. The Marzocchi's tend to be a little expensive but
if the bike is a keeper it's probably worthwhile.

--Paul

Hey, Guys...

I got out the box the forks came in and discovered several interesting items. I found the original
sales receipt, which proves I am the original owner. Not only that, but I found a 8-page glossy
insert that touted the great features of the fork. Right there, on page 5 it states the fork has an
"exclusive two year warranty" however, this is followed by a statement that there is a "lifetime
warranty on bushings, seals, and elastomers."

Most curious, no? I suppose this warrants (pun intended) another call to Answer tech support.

Wish me luck,

Eurastus

Eurastus said:

I've got a pair of the original Answer Manitou forks. They don't have a model number or name.
These are the first suspension forks Answer produced back in the late 80's-early 90's, before the
Manitou 2.

I was out on a ride with the kids the other day and heard a ripping sound come from one of the fork
legs when I hit a moderate bump. This was immediately followed by the same sound from the other
leg. The fork bottomed out and I knew I had problems. I took the fork apart and discovered the
longer red elastomers in both legs had split down the length, exposing the long Allen bolt running
through them. I called Answer this morning to find if they still stocked replacements but the tech
on the phone practically laughed at me when I mentioned how old these are. He suggested I" get with
the program and buy something less than a decade old".

Well, fine...not what I wanted to hear. The fork is mounted on an older Slingshot with a 1" steerer
and all the forks I can find in the 1" size these days are very low-end. Besides that, this bike
does not have V-brakes and frankly I don't want to replace 1/2 the parts on the bike...maybe even
more if I need a 1 1/8" steerer frame.

I've got the split elastomers in my pocket, prepared to visit every LBS in a 50-mile radius just on
the off chance they have something in the junk drawer that might fit.

Before I do that, I'm looking for advice from the community on any ideas where I might find a
replacement set...or something that will fit.

According to the manual that came with these, what I'm looking for are Answer part numbers 040164
and 040197 ( ought to replace the shorter elastomers as well since they don't look too good
either). There is also a "Soft Ride" kit listed as part number 85-3501 and a "Firm Ride" kit is
85-3502. Frankly, the latter would be fine as well---I don't weigh quite what I did when these
were new...

Ideas?

Thanks for your time,

Eurastus.

Update...I called Answer back and was able to speak with the Customer Support manager. Nice chap. He
repeated the message that no elastomers were to be found. Because of the warranty phrase on the
literature, he offered to send me a 2001 SX-R fork as a replacement. I suppose that's OK, though I'd
really like to get the old Manitou running instead.

Hope someone out there is still reading this thread and can give me some leads on replacement
elastomers.

By the way, Someone suggested Loose Screws...I found them but no help...they had nothing.

Eurastus said:

I've got a pair of the original Answer Manitou forks. They don't have a model number or name.
These are the first suspension forks Answer produced back in the late 80's-early 90's, before the
Manitou 2.

I was out on a ride with the kids the other day and heard a ripping sound come from one of the fork
legs when I hit a moderate bump. This was immediately followed by the same sound from the other
leg. The fork bottomed out and I knew I had problems. I took the fork apart and discovered the
longer red elastomers in both legs had split down the length, exposing the long Allen bolt running
through them. I called Answer this morning to find if they still stocked replacements but the tech
on the phone practically laughed at me when I mentioned how old these are. He suggested I" get with
the program and buy something less than a decade old".

Well, fine...not what I wanted to hear. The fork is mounted on an older Slingshot with a 1" steerer
and all the forks I can find in the 1" size these days are very low-end. Besides that, this bike
does not have V-brakes and frankly I don't want to replace 1/2 the parts on the bike...maybe even
more if I need a 1 1/8" steerer frame.

I've got the split elastomers in my pocket, prepared to visit every LBS in a 50-mile radius just on
the off chance they have something in the junk drawer that might fit.

Before I do that, I'm looking for advice from the community on any ideas where I might find a
replacement set...or something that will fit.

According to the manual that came with these, what I'm looking for are Answer part numbers 040164
and 040197 ( ought to replace the shorter elastomers as well since they don't look too good
either). There is also a "Soft Ride" kit listed as part number 85-3501 and a "Firm Ride" kit is
85-3502. Frankly, the latter would be fine as well---I don't weigh quite what I did when these
were new...

Ideas?

Thanks for your time,

Eurastus.

Yes. I called MountainSpeed; they had nothing that would fit. I called the company that made the
Englunds (out of Grand Junction CO); they also had nothing that would fit. Mark stated that he had
elastomers for the Manitou
4/5. Answer's support tech reported that they will not fit.

I believe I am reading the group carefully.

Thanks for your words though,

Eurastus...

Buck' j u n k m a i l @ g a l a x y c o r p . c o m said:

"Eurastus" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Update...I called Answer back and was able to speak with the Customer

Support

Quoted message said:

manager. Nice chap. He repeated the message that no elastomers were to

be

Quoted message said:

found. Because of the warranty phrase on the literature, he offered to

send me

Quoted message said:

a 2001 SX-R fork as a replacement. I suppose that's OK, though I'd really

like

Quoted message said:

to get the old Manitou running instead.

Hope someone out there is still reading this thread and can give me some

leads

Quoted message said:

on replacement elastomers.

I would take the new fork. But if you decide not to, you need to read the group more carefully.
Mark Hickey posted that he has some replacement elastomers on hand. I also posted that you should
consider SpeedSprings from MountainSpeed as a replacement (they worked well on my old RockShox).
Another poster recommended a set of Englund Air Cartridges.

We're giving you all the help we can! What more do you want?!?!?

-Buck

In article said:

Update...I called Answer back and was able to speak with the Customer Support manager. Nice chap.
He repeated the message that no elastomers were to be found. Because of the warranty phrase on the
literature, he offered to send me a 2001 SX-R fork as a replacement. I suppose that's OK, though
I'd really like to get the old Manitou running instead.

They have done the right thing here, take them up on it.

--Paul

"Eurastus" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Update...I called Answer back and was able to speak with the Customer

Support

Quoted message said:

manager. Nice chap. He repeated the message that no elastomers were to

be

Quoted message said:

found. Because of the warranty phrase on the literature, he offered to

send me

Quoted message said:

a 2001 SX-R fork as a replacement. I suppose that's OK, though I'd really

like

Quoted message said:

to get the old Manitou running instead.

That's the best possible outcome - the SX-R is a sweet fork. Much better than the old Manitou I (of
which I've owned 2). I replaced my Marzocchi Bomber with a Manitou Magnum, and find it to be a
superior fork in all respects. The SX-R is even better than the Magnum, from what I hear; but have
never tried it myself.

Your paperwork and follow-up really paid off. Let's give Manitou some kudos for honoring the
warranty without too many hassles. They probably get a lot of "my fork is trashed; but I only did an
8 ft drop on it" kind of calls; and it must get tiresome trying to differentiate between legit
claims and abusers wanting a free ride (pun intended).

Glad to hear your success story. Enjoy your new fork - hope it lasts you another 10 years.

-Barry

B. Sanders said:

"Eurastus" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Update...I called Answer back and was able to speak with the Customer

Support

Quoted message said:

manager. Nice chap. He repeated the message that no elastomers were to

be

Quoted message said:

found. Because of the warranty phrase on the literature, he offered to

send me

Quoted message said:

a 2001 SX-R fork as a replacement. I suppose that's OK, though I'd really

like

Quoted message said:

to get the old Manitou running instead.

That's the best possible outcome - the SX-R is a sweet fork. Much better than the old Manitou I
(of which I've owned 2). I replaced my Marzocchi Bomber with a Manitou Magnum, and find it to be a
superior fork in all respects. The SX-R is even better than the Magnum, from what I hear; but have
never tried it myself.

Your paperwork and follow-up really paid off. Let's give Manitou some kudos for honoring the
warranty without too many hassles. They probably get a lot of "my fork is trashed; but I only did
an 8 ft drop on it" kind of calls; and it must get tiresome trying to differentiate between legit
claims and abusers wanting a free ride (pun intended).

Glad to hear your success story. Enjoy your new fork - hope it lasts you another 10 years.

Excellent! This says a lot about the company. I'd take them up on the offer -- the SX-R is a great
fork, way better than any old-style bumper Manitou.

Matt O.

Eurastus said:

Update...I called Answer back and was able to speak with the Customer Support manager. Nice chap.
He repeated the message that no elastomers were to be found. Because of the warranty phrase on the
literature, he offered to send me a 2001 SX-R fork as a replacement. I suppose that's OK, though
I'd really like to get the old Manitou running instead.

Wow, that's interesting. When I called Answer for bushings for my 97 FS Ti and qouted the "lifetime
warranty" line from the manual, I was told that the term "lifetime" referred to the "useful life" of
the fork, which they had determined to be 3 years - therefore no warranty claim would be honored.
They did offer me a "discount" on a new last-year's-model fork.

I bought a Marzocchi instead.

-Ed

"Ed J." <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Eurastus said:

Update...I called Answer back and was able to speak with the Customer

Support

Quoted message said:

Quoted message said:

manager. Nice chap. He repeated the message that no elastomers were to

be

Quoted message said:

Quoted message said:

found. Because of the warranty phrase on the literature, he offered to

send me

Quoted message said:

Quoted message said:

a 2001 SX-R fork as a replacement. I suppose that's OK, though I'd

really like

Quoted message said:

Quoted message said:

to get the old Manitou running instead.

Wow, that's interesting. When I called Answer for bushings for my 97 FS Ti and qouted the
"lifetime warranty" line from the manual, I was told that the term "lifetime" referred to the
"useful life" of the fork, which they had determined to be 3 years - therefore no warranty claim
would be honored. They did offer me a "discount" on a new last-year's-model fork.

Wow, that's quite a difference. Maybe Answer/Manitou has had a change of policy in the interim
period since you contacted them. That could happen. (Or maybe the received threats of lawsuits for
failing to honor their warranty terms.)

Quoted message said:

I bought a Marzocchi instead.

Can't go wrong there. They're good forks - a little heavy; but well made.

-Barry

B. Sanders said:

"Ed J." <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Eurastus said:

Update...I called Answer back and was able to speak with the Customer

Support

Quoted message said:

Quoted message said:

manager. Nice chap. He repeated the message that no elastomers were to

be

Quoted message said:

Quoted message said:

found. Because of the warranty phrase on the literature, he offered to

send me

Quoted message said:

Quoted message said:

a 2001 SX-R fork as a replacement. I suppose that's OK, though I'd

really like

Quoted message said:

Quoted message said:

to get the old Manitou running instead.

Wow, that's interesting. When I called Answer for bushings for my 97 FS Ti and qouted the
"lifetime warranty" line from the manual, I was told that the term "lifetime" referred to the
"useful life" of the fork, which they had determined to be 3 years - therefore no warranty claim
would be honored. They did offer me a "discount" on a new last-year's-model fork.

Wow, that's quite a difference. Maybe Answer/Manitou has had a change of policy in the interim
period since you contacted them. That could happen. (Or maybe the received threats of lawsuits for
failing to honor their warranty terms.)

Quoted message said:

I bought a Marzocchi instead.

Can't go wrong there. They're good forks - a little heavy; but well made.

Here's a nice warranty story.

One of my friends rescued a bike from a junk pile in another friend's backyard, where it had
probably been sitting for over 20 years. It was a Schwinn beach cruiser, a little rusty and with a
few parts missing. But after a good cleanup and a few new pieces, it was pressed into daily service.

He rode it for several weeks, until one day the frame broke when he rolled off a curb. He thought
nothing of it, but his dad insisted Schwinns had a lifetime warranty that could be pursued. So
feeling a little silly, he called Schwinn, who told him to bring the bike to the local Schwinn
dealer for inspection. About three days later, the dealer called back, and told him to come in and
pick up his new bike -- not just a frame, but a whole brand new beach cruiser!

Maybe that's why Schwinn went bankrupt. However, my friend has ridden only Schwinns ever since --
maybe not new ones, but he's sure spent plenty on parts, fixing up old ones. (The one he got for
free was stolen just a few days later.)

Matt O.