Off-road 29er tyre pressure survey

Mostly people don't give numbers because they don't apply to you. For
their numbers to be useful to you, you would have to have the same rim,
the same tire, the same type of terrain, and live at similar
elevations. And then there's the whole thing about how most tire
pressure gauges are not that accurate.

Which means, unfortunately, you're going to have to experiment. Rule
one, keep the rim from touching the ground. This means more pressure
than you may want if there are drops, sharp rocks, etc. Beyond that,
you'll have to do some riding and testing. Start with high pressure and
work your way down, it's a lot easier than going the other way.

I did this a few weeks ago. It was my first MUni ride after several
weeks of prep for the Lake Tahoe (Coker) ride. The tire and seat height
just didn't feel right and I did a whole bunch of changes before it
felt comfortable. Then I was at the top of the long climb and the rules
changed... 🙂

--
johnfoss

John Foss
Email: "jfoss" at "unicycling.com" -- www.unicycling.com
-----------------------------------------------

"pretty much every trail that we've done on the California or Moab Muni
weekends is an XC trail." -- Kris Holm, on XC from a North Shore point
of view
------------------------------------------------------------------------
johnfoss's Profile: http://www.unicyclist.com/profile/832
View this thread: http://www.unicyclist.com/thread/62437

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

On my 28" I run the tyre at 130 psi. As yours is a 29" and therefore,
3.5% bigger, that would suggest about 136 psi...:p 😉 😄 😎 :eek:

Seriously, the best test is the finger and thumb test. Pump the tyre
up, then sqeeze it. If you can squeeze it a bit between finger and
thumb, it's probably about right. A bit harder for flat fast road, a
bit softer for bumpier stuff.

I don't see any obvious reason why tyre pressure should vary
considerably with wheel diameter, rather than tyre section. I run my
KH24 at around 20 psi, and that's a 3" section. The Holy Roller is a
2.3" section and runs at a bit more than 20 psi. (The 28 (700c) is a
23mm section.)

--
Mikefule

Never ride faster than your guardian angel can fly.
------------------------------------------------------------------------
Mikefule's Profile: http://www.unicyclist.com/profile/879
View this thread: http://www.unicyclist.com/thread/62437

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

I recently got a kenda klaw XT, I've got the pressure way up around 40
psi i think, anything less and the sidewalls balloon out causing major
drag as I ride. At this pressure there is little bounce for absorbing
drops or putting in rolling hops. However as you know I'm a big guy,
and much heavier than I look, I expect several stone heavier than you,
so maybe start at 30 and play with it from there. The 29er is such a
liberating experience after plodding around on a 24" for years, I was
amazed how close the speed was to my N36, infact on the rough stuff I'm
pretty sure the 29 was faster than I've previously managed on the 36.

--
kington99

Dave

- what a thoroughly post-modern subversion of the cycling genre -
------------------------------------------------------------------------
kington99's Profile: http://www.unicyclist.com/profile/9417
View this thread: http://www.unicyclist.com/thread/62437

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

i dont know what pressure mine is at as ive never looked. The 'giving it
a squeeze' test is usually pretty good. Also I find hopping on the spot
for a bit gives me a fairly good indication of pressure.

Quoted message said:

The 29er is such a liberating experience after plodding around on a 24"
for years

Agree there. Am struggling to find a use for my 24" now round here

--
lowlight
------------------------------------------------------------------------
lowlight's Profile: http://www.unicyclist.com/profile/12290
View this thread: http://www.unicyclist.com/thread/62437

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Bout 30ish on mine.

Lower if it's technical stuff though.

40ish if I'm riding much road too.

50ish if it's mainly road.

Basically, if you're getting annoyed by it being squelchy and slow,
that suggests you need more for the terrain you're riding, if you're
annoyed by it knocking you off at the slightest bump, less pressure.

Joe

--
joemarshall

my pics http://gallery.unicyclist.com/albuq44
------------------------------------------------------------------------
joemarshall's Profile: http://www.unicyclist.com/profile/1545
View this thread: http://www.unicyclist.com/thread/62437

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

I can't suggest any actual pressure for a 29er tyre (I run about 18psi
in the 26x3 and 28psi in the coker), but I'd say start with it on the
hard side to start with and let it down a bit at a time - you don't
want to start with it too soft and prang the rim on a rock.

Rob

--
rob.northcott

'Dartmoor Muni Weekend 2007'
(http://www.unicyclist.com/forums/showthread.php?t=57785) Date now
confirmed as 21st-22nd July. It'll be dry, I promise 🙂
------------------------------------------------------------------------
rob.northcott's Profile: http://www.unicyclist.com/profile/7436
View this thread: http://www.unicyclist.com/thread/62437

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

Well, the recommended pressure on the sidewall of the Klaw is something
like 40-60psi, right? By default I usually inflate to 40 or so; I
tried 60 once and found it a bit hard to handle. I may have just been
unused to it, but it did feel easier to control once I'd let some air
out.

I've ridden it down to rather low pressures - possibly about 20psi, I
think. I did this when it snowed and I got nice surefooted handling
out of it. But running that pressure probably put me at risk of
blowouts, snakebite punctures and rim damage, so I'm not sure I'd
recommend it generally...

Rumours are that in the next year or so we ought to see some DH
oriented 29er tyres come onto the market. Hopefully these will run at
lower pressures for those who need it.

On the plus side, my Kenda rolls quite nicely on the road 🙂 During
the British "Summer" I may switch back to my BA 2.35 if it stops
raining for long enough, but even for purely road based commuting I
find the Kenda works quite nicely.

--
mark williamson

Dave: Just a question. What use is a unicyle with no seat? And no
pedals!
Mark: To answer a question with a question: What use is a skateboard?
Dave: Skateboards have wheels.
Mark: My wheel has a wheel!
------------------------------------------------------------------------
mark williamson's Profile: http://www.unicyclist.com/profile/11301
View this thread: http://www.unicyclist.com/thread/62437

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

KH29 2005 / 150 cranks / Kendra Klaw / 72kg

I've also just done the pinch test with my tire but today I checked
before my ride and it was at 22 PSI. I'd been riding offroad for
sometime at this level and it hasn't bothered me. So as I test I upped
it to 30 PSI. No difference, at least none that I noticed.

Conditions today were mud / hard packed sandy paths / loose tree bark
single track / wet grass / small stones / under 1ft drops

I tend to pump up the tire before riding and if I start bouncing off
things too much I lower the pressure, if the tire starts folding
sideways on corners etc then I up the pressure.

I'd start high then lower to suit.

--
norry

my latest muni ride report [ 'here'
(http://www.unicyclist.com/forums/showthread.php?t=61385) ]
*buc14 video competition entry - 3rd place british* [
'video'
(http://www.unicyclist.com/forums/showthread.php?t=60020) ]
london uk uni meet 06 [ 'video '
(http://www.unicyclist.com/forums/showthread.php?t=54700) ]
------------------------------------------------------------------------
norry's Profile: http://www.unicyclist.com/profile/6901
View this thread: http://www.unicyclist.com/thread/62437

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com

mark williamson said:

Rumours are that in the next year or so we ought to see some DH oriented
29er tyres come onto the market. Hopefully these will run at lower
pressures for those who need it.

This is true, Kris is riding the '08 WTB stout, and he tells me that
it's bigger, better, and higher volume than anything on the market
currently. 2008 is supposed to be the year of the 29er!

--
kerosian

I used to get high on life, until I built up a tolerance, so now I
unicycle.
Yay! Pamba Mountain b*ke race July 22nd, wish me luck!
------------------------------------------------------------------------
kerosian's Profile: http://www.unicyclist.com/profile/13944
View this thread: http://www.unicyclist.com/thread/62437

Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
** SPEED ** RETENTION ** COMPLETION ** ANONYMITY **
----------------------------------------------------------
http://www.usenet.com