Noise from the wheel?

What kind of hub and what brand of cranks do you have?

--
daino149 - On Vacation - till i find a job

Check out my 'pics ' (http://www.unicyclist.com/gallery/daino)
'My X-a-n-g-a' (http://www.xanga.com/home.aspx?user=fingerpies)
I need to find a job
------------------------------------------------------------------------
daino149's Profile: http://www.unicyclist.com/profile/933
View this thread: http://www.unicyclist.com/thread/38842

try tightning the bearing mounts cause i had sort of the same problem
and i just tightened them and the problem went away so that could be
your only problem

--
unijuggler - you got

oh yessssssssss

fell on my scabbed over knee again!!
so much for that scab

------------------------------------------------------------------------
unijuggler's Profile: http://www.unicyclist.com/profile/7513
View this thread: http://www.unicyclist.com/thread/38842

unijuggler said:

*try tightning the bearing mounts cause i had sort of the same problem
and i just tightened them and the problem went away so that could be
your only problem *

The above just has happened to me today.
The solution was as in the quote.😉

--
Uniwitold

Veni !Vidi !Mount ! ' Public does not perceive it reacts'. Greg
Harper.
------------------------------------------------------------------------
Uniwitold's Profile: http://www.unicyclist.com/profile/2181
View this thread: http://www.unicyclist.com/thread/38842

are you sure its not ur seat? My seat makes creakin noises all the time
and it feels like its comin from the hub/tire area.

--
musketman
------------------------------------------------------------------------
musketman's Profile: http://www.unicyclist.com/profile/9214
View this thread: http://www.unicyclist.com/thread/38842

o and maybe it is the spokes cuz when you sit donw its putin weight on
the spokes maken them bend/move around a little.When you have the uni in
hte air there is no weight on the spokes maken them do that.

--
musketman
------------------------------------------------------------------------
musketman's Profile: http://www.unicyclist.com/profile/9214
View this thread: http://www.unicyclist.com/thread/38842

daino149 said:

*What kind of hub and what brand of cranks do you have? *

Profile.
Some noise may be coming from the seat (but I happened to change that
yesterday also). At least during today's ride it wasn't so annoying.

--
ChangingLINKS.com - member

Wishing you Happiness, Joy and Laughter,
Drew Brown
'Changing LINKS' (http://www.ChangingLINKS.com)
------------------------------------------------------------------------
ChangingLINKS.com's Profile: http://www.unicyclist.com/profile/5468
View this thread: http://www.unicyclist.com/thread/38842

ChangingLINKS.com said:

*I am getting a noise from the wheel.
It's like a creaking that I can feel and hear.

I can make the noise with the wheel spinning in the air:
It's not the spokes.

I just replaced the bearings with brand new ones.
It's not the bearings.

There is no pressure on the cranks.
I doubt it's the cranks.

The noise happens with or without pedals.
It's not the pedals.
*

At first when I read this I thought this was a poem 😄 .

--
leeman180 - I should be out unicycling
------------------------------------------------------------------------
leeman180's Profile: http://www.unicyclist.com/profile/8441
View this thread: http://www.unicyclist.com/thread/38842

Could the lips of the bearing holders be rubbing on the Profile spacer
washers? Maybe one of the washers has a little nub that's sticking out
and hitting part of the bearing holder every revolution.

Are you using the big conical shaped saucer spacer from Profile? That
spacer can have some clearance problems with some frames and it could be
rubbing on the frame. You can get additional small spacer washers from
Profile so you don't have to use that big spacer thing.

--
john_childs - Guinness Mojo

john_childs (att) hotmail (dott) com
Gallery: '' (http://www.unicyclist.com/gallery/john_childs)

\"otherwise we'd just sit around a table and try to agree on what the
fastest time for a 1 hour time trial should be.\" -- john_childs
demonstrating a deep understanding of time
------------------------------------------------------------------------
john_childs's Profile: http://www.unicyclist.com/profile/449
View this thread: http://www.unicyclist.com/thread/38842

john_childs said:

*Could the lips of the bearing holders be rubbing on the Profile
spacer washers? Maybe one of the washers has a little nub that's
sticking out and hitting part of the bearing holder every
revolution.

Are you using the big conical shaped saucer spacer from Profile? That
spacer can have some clearance problems with some frames and it could
be rubbing on the frame. You can get additional small spacer washers
from Profile so you don't have to use that big spacer thing. *

This has happened on 2 of my profile wheels. Both times it went away
quickly, but then cam back when I rotated the cranks, possibly because
the spacers moved too.

--
gerblefranklin - Trials Unicyclist

http://gallery.unicyclist.com/Trials-Muni

Nick's main man.

"Democracy is just a word when the people are starving"-Immortal
Technique

* I need a profile hub, any condition, as long as the splines work! (PM
me) *
------------------------------------------------------------------------
gerblefranklin's Profile: http://www.unicyclist.com/profile/4295
View this thread: http://www.unicyclist.com/thread/38842

leeman180 said:

*At first when I read this I thought this was a poem 😄 . *

You beat me to it!!!😄

--
DK - Team YAMS Member

-Hunter-
Im a Yamsta.
------------------------------------------------------------------------
DK's Profile: http://www.unicyclist.com/profile/8054
View this thread: http://www.unicyclist.com/thread/38842