Cycling Equipment · Public discussion

Nerius TA 34T chainring fitting problem

Started by tiddy · · Last activity · 6 posts · 1,548 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
25 March 2007
Last activity
27 March 2007
Original author
tiddy
Posts
6
Discussion status
Public discussion
Total views
1,548
Views / 30 days
0
Topics

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–6 of 6
Posts remain in their original chronological order.

Text size
  1. Help need & appreciated.
    I tried to fit a Nerius 34T 110mm chain ring to a Campagnolo Compact spider. The 5th branch is different and I don't seem to be able to align the holes as a result - am i missing something - no instructions came with the ring.

    Hoping sobody out there might be able to help

    regards

    tim

  2. tiddy said:

    Help need & appreciated.
    I tried to fit a Nerius 34T 110mm chain ring to a Campagnolo Compact spider. The 5th branch is different and I don't seem to be able to align the holes as a result - am i missing something - no instructions came with the ring.

    Hoping sobody out there might be able to help

    regards

    tim

    I am not 100% certain on this, but I believe that the 5th hole on the inner chainrings for the Record, Chorus, and Centaur Carbon compacts is slightly different than the Centaur (aluminum) and Veloce compacts because of the fixation of the 5th bolt directly to the crank arm on the higher end stuff.

  3. John M said:

    I am not 100% certain on this, but I believe that the 5th hole on the inner chainrings for the Record, Chorus, and Centaur Carbon compacts is slightly different than the Centaur (aluminum) and Veloce compacts because of the fixation of the 5th bolt directly to the crank arm on the higher end stuff.

    Thank you John for your reply - I am going to my LBS tomorrow to see if anything can be done. I came across a quote on a French site but was unable to decipher it - " la 5eme branche est legerement en retrait permettant la fixation de la manivelle " - I can make a stab at the translation - the fifth branch is slightly recessed permitting --------- to be attached - perhaps your French is better than mine - I cannot find a dictionary!

    regards & happy cycling

  4. John M said:

    I am not 100% certain on this, but I believe that the 5th hole on the inner chainrings for the Record, Chorus, and Centaur Carbon compacts is slightly different than the Centaur (aluminum) and Veloce compacts because of the fixation of the 5th bolt directly to the crank arm on the higher end stuff.

    Thank you John for your reply - I am going to my LBS tomorrow to see if anything can be done. I came across a quote on a French site but was unable to decipher it - " la 5eme branche est legerement en retrait permettant la fixation de la manivelle " - I can make a stab at the translation - the fifth branch is slightly recessed permitting --------- to be attached - perhaps your French is better than mine - I cannot find a dictionary!

    regards & happy cycling

  5. This guy may be able to help: http://www.peterwhitecycles.com/chainrings.asp

  6. Thanks to all who replied - I went to LBS today ( Tuam, Co. Galway, Ireland) - got it fitted - it need a little persuasion - Dara thought that the chainring may have got a little bend in the post or else we might see a recall - anyway it is now fitted! John is probably correct with regards to his suggestion.

    So thanks once again - happy cycling

    Tim

    gclark8 said:

    This guy may be able to help: peterwhitecycles.comchainrings.asp

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.