Had a graunching noise when going uphill standing on left pedal which got slowly worse. Changed bottom bracket made no difference, changed pedals still no difference, changed them for 3rd set and no change. Tightened crank bolts no change. New chain, cassette and middle ring made no difference. So am flummoxed. Definitely sounds like a bearing. Could bad wheel bearing sound when standing on left pedal only? Or something else?
Had a graunching noise when going uphill standing on left pedal which got slowly worse. Changed bottom bracket made no difference, changed pedals still no difference, changed them for 3rd set and no change. Tightened crank bolts no change. New chain, cassette and middle ring made no difference.
So am flummoxed. Definitely sounds like a bearing. Could bad wheel bearing sound when standing on left pedal only? Or something else?
Had a graunching noise when going uphill standing on left pedal which got slowly worse. Changed bottom bracket made no difference, changed pedals still no difference, changed them for 3rd set and no change. Tightened crank bolts no change. New chain, cassette and middle ring made no difference. So am flummoxed. Definitely sounds like a bearing. Could bad wheel bearing sound when standing on left pedal only? Or something else?
Nope. Changed from SPD to old toeclip pedals. Could be that all 3 left pedals are tatered I suppose, they are all well used. I'm beginning to wonder if the stem is loose/out of shape in the fork tube as it needed a good bit of tightening up, but didn't make any difference to the noise. Could have got pushed out of shape by being loose perhaps.
Had a graunching noise when going uphill standing on left pedal which got slowly worse. Changed bottom bracket made no difference, changed pedals still no difference, changed them for 3rd set and no change. Tightened crank bolts no change. New chain, cassette and middle ring made no difference. So am flummoxed. Definitely sounds like a bearing. Could bad wheel bearing sound when standing on left pedal only? Or something else?
Assuming that you are standing so we can rule out the seat and seatpost could it be frame flex? On a tight clearance frame it is possible for the tyre to rub on the frame under too much effort.
-- Tony
"I did make a mistake once - I thought I'd made a mistake but I hadn't" Anon
Had a graunching noise when going uphill standing on left pedal which got slowly worse. Changed bottom bracket made no difference, changed pedals still no difference, changed them for 3rd set and no change. Tightened crank bolts no change. New chain, cassette and middle ring made no difference. So am flummoxed. Definitely sounds like a bearing. Could bad wheel bearing sound when standing on left pedal only? Or something else?
Assuming that you are standing so we can rule out the seat and seatpost could it be frame flex? On a tight clearance frame it is possible for the tyre to rub on the frame under too much effort.
Shoe? Stem/handlebarclamp, Or the downtube graunching on the bottombracketshell, cracked frame?
Had a graunching noise when going uphill standing on left pedal which got slowly worse. Changed bottom bracket made no difference, changed pedals still no difference, changed them for 3rd set and no change. Tightened crank bolts no change. New chain, cassette and middle ring made no difference. So am flummoxed. Definitely sounds like a bearing. Could bad wheel bearing sound when standing on left pedal only? Or something else?
cheers
Jacob
Not sure what "graunching" describes exactly, but my most recent mystery noise was cured by a good slathering of grease on the stem and on the expander bolt.
Have at last isolated the cause - it was the left hand crank. Now silent with an old crank in place. But still flummoxed - can't see how or why it made a noise; it's been taken off and on, tightened and again etc and there is absolutely nothing visible. Seems to be inherently creaky but not badly fitted or anything. It's a Shim. Deore Hollowtech standard on Dawes Galaxy and has done about 7000km. cheers
Had a graunching noise when going uphill standing on left pedal which got slowly worse. Changed bottom bracket made no difference, changed pedals still no difference, changed them for 3rd set and no change. Tightened crank bolts no change. New chain, cassette and middle ring made no difference. So am flummoxed. Definitely sounds like a bearing. Could bad wheel bearing sound when standing on left pedal only? Or something else?
How about chain rubbing on cage of badly-adjusted front changer ?