My first Unicycle

If you want to be absolutely sure you're getting something quality,
check out www.unicycle.com . They have a store in the UK. It just
depends how much you trust ebay I guess. I'm not sure that I like the
look of those bearing holders (the things at the wheel end of the
frame). They look rather flimsy to me.

Good luck,
Andrew

--
andrew_carter - www.unicycles.com.au

HTTP://WWW.UNICYCLIST.COM/GALLERY/ANDREW
andrew_carter (at) mail (dot) com
http://www.unicycles.com.au
New photos added 11/04 - http://www.unicyclist.com/gallery/albuu61
------------------------------------------------------------------------
andrew_carter's Profile: http://www.unicyclist.com/profile/1052
View this thread: http://www.unicyclist.com/thread/32627

I can answer this for you as this was the unicycle I brought.
Reasons for this were;

1) I knew nothing about unicycles or the different types etc that you could
buy.
2) It was cheap, i didn't what to spend loads on something i might not have
carried on with.

Ok onto the uni but first the seller. Parkers of Bolton were a joy to deal
with with prompt delivery and telephone support.

The Uni.

Pretty much what you see is what you get with this. The Description/Photos
are all accurate.
I was also worried about the bearing holders but they are sturdy enough for
learning on (not i suspect dropping from 3 ft).
Basical for a learning uni (which gets dropped v often) i'm finding it fine
to ride on. One problem however is I had to buy a new seat post as the one
supplied ain't really big enough for even small people to have at a suitable
height.

So far i've been happy with it, however I will be buying another one at some
point (Christmas likely) now that i've got hocked.

Bingo Jesus i'm guessing that your from the UK?

"Bingo Jesus" <[email hidden]> wrote
in message
news:[email hidden]...

Quoted message said:

I'm planning to buy a unicycle and I've stumbled across this model on
ebay (http://tinyurl.com/2g5mm).

Do any of you know anyhting about this Unicycle, is it worth it? Or do
any of you know a good shop which sell uniyles to anywhere in the UK?

Many Thanks,
Bingo Jesus

--
Bingo Jesus
------------------------------------------------------------------------
Bingo Jesus's Profile: http://www.unicyclist.com/profile/6664
View this thread: http://www.unicyclist.com/thread/32627

Yeah, I am. Thanks for the advice, I'm definatly getting one once the
exams are over (Why do they put exams in summer anyway?), I'm sure I'll
be back on these forums soon. Thanks.

--
Bingo Jesus
------------------------------------------------------------------------
Bingo Jesus's Profile: http://www.unicyclist.com/profile/6664
View this thread: http://www.unicyclist.com/thread/32627

The description says 'sealed main cap bearings'.

From the close up of the bearing holders they don't look like main caps,
but more like 'lollipop' which are notoriously prone to breakage after a
few months.

Have a look at the close up: -

http://tinyurl.com/2ef8s

They do look really flimsy.

It's cheap though 🙂

If you think you're going to get into this then do check out: -

www.unicycle.uk.com

they sell good stuff at good prices.

--
onewheeldave - Semi Skilled Unicyclist

"He's also been known to indulge in a spot of flame juggling - but it's
the Muni that really fires him up."

------------------------------------------------------------------------
onewheeldave's Profile: http://www.unicyclist.com/profile/874
View this thread: http://www.unicyclist.com/thread/32627

"Bingo Jesus" <[email hidden]> wrote
in message
news:[email hidden]...

Quoted message said:

I'm planning to buy a unicycle and I've stumbled across this model on
ebay (http://tinyurl.com/2g5mm).

It is a very cheap unicycle: having said that many of us in here probably
learnt on pretty cheap basic unicycles. Most of us will now have dug deeper
into thge pockets. Some, and especially the kids, will still have the cheap
machine months, even years later.
Few novices KNOW whether they intend to keep at unicycling, so for those not
sure and who may give up, a cheap uni is a reflection of that. It will not
cost an arm and a leg if you hate it once you try.
It may be worth visiting your local juggling club: many have club unis,
which you can have a go on. If you like it then buy an appropriate machine
later.

Naomi

I think that the best you can do, is buy a brand-new unicycle. You can
have good models, for only 130 euros.

--
janklaasclaeys - www.circusplanet.net

Let's go to ALPE D'HUEZ
------------------------------------------------------------------------
janklaasclaeys's Profile: http://www.unicyclist.com/profile/3219
View this thread: http://www.unicyclist.com/thread/32627

I'd buy one from unicycle.com, mine came from there (via a shop in
exeter) and is good quality.
http://tinyurl.com/2rjsn
It is twice the price though.

The problem with the ebay one is that it will most likely break after
not very long riding it, and if you decide you want to get more serious,
you've got no choice but to buy a new unicycle.

With the one linked above, however, the frame's good and strong, as is
the wheelset, there's room in the frame for a bigger tyre, should you
want one, and you know it's going to be strong enough for most things
you're likely to do.

--
theamazingmolio - A Unicylist, a juggler, and a prat

Luke Duller ([email hidden])
Never trust anything you read on the internet
------------------------------------------------------------------------
theamazingmolio's Profile: http://www.unicyclist.com/profile/5931
View this thread: http://www.unicyclist.com/thread/32627

Thanks a lot, I think I might go to unicycle.com to get a learner or
trainer model. Now I'll just have to laern to juggle as I save 🙂.

--
Bingo Jesus
------------------------------------------------------------------------
Bingo Jesus's Profile: http://www.unicyclist.com/profile/6664
View this thread: http://www.unicyclist.com/thread/32627