Somebody asked for a picture of my bike so here it is:
Road Cycling · Public discussion
My First Road Bike
Thread navigation
Jump through the discussion
Go to the original post, the replies on this page, or the latest preserved contribution.
Thread details
What we know about this thread
- Original section
- Road Cycling
- Published
- 2 February 2013
- Last activity
- 12 March 2013
- Original author
- Blake Neese
- Posts
- 20
- Discussion status
- Public discussion
- Total views
- 1,133
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
Very nice.
-
Quoted post said:
Originally Posted by alienator [IMG]/img/forum/go_quote.gif[/IMG]
Very nice.
I had a custom fitting session and everything, I love it and I look forward to the world of cycling.
-
herculis top gear in my 1st bike
-
Quoted post said:
Originally Posted by Blake Neese [IMG]/img/forum/go_quote.gif[/IMG]
I had a custom fitting session and everything, I love it and I look forward to the world of cycling.
Hmmm I think I want a custom fitting session but I am worried that I am gonna feel like "Cleopatra" [IMG]/img/vbsmilies/smilies/biggrin.gif[/IMG]
Do they touch a lot when they do that???
-
Quoted post said:
Originally Posted by Volnix [IMG]/img/forum/go_quote.gif[/IMG]
Hmmm I think I want a custom fitting session but I am worried that I am gonna feel like "Cleopatra" [IMG]/img/vbsmilies/smilies/biggrin.gif[/IMG]
Do they touch a lot when they do that???
The inseam measurement is the best part.[IMG]/img/vbsmilies/smilies/biggrin.gif[/IMG]But Caveat emptor, a bike fitting is like a haircut, and everyone here with some sense of vanity/self-awareness knows they've ended up with a bad one at least once. There are fitters, and then there are fitting methodologies. Most of the time it works out just fine, especially when the fitter works via a riders feedback. However we had a fitter do my team last season, I saw some pretty wonky, arbitrary, and subjective calls. I respectfully declined.
-
Quoted post said:
Originally Posted by danfoz [IMG]/img/forum/go_quote.gif[/IMG]
The inseam measurement is the best part.[IMG]/img/vbsmilies/smilies/biggrin.gif[/IMG]
But Caveat emptor, a bike fitting is like a haircut, and everyone here with some sense of vanity/self-awareness knows they've ended up with a bad one at least once. There are fitters, and then there are fitting methodologies. Most of the time it works out just fine, especially when the fitter works via a riders feedback. However we had a fitter do my team last season, I saw some pretty wonky, arbitrary, and subjective calls. I respectfully declined.
Hmmm I might go for one... I have this problem with the seat lately... I am worried about my back angle too...
-
Quoted post said:
Originally Posted by Volnix [IMG]/img/forum/go_quote.gif[/IMG]
Hmmm I think I want a custom fitting session but I am worried that I am gonna feel like "Cleopatra" [IMG]/img/vbsmilies/smilies/biggrin.gif[/IMG]
Do they touch a lot when they do that???
They were former TSA agents before they started fitting for bicycles.
-
Quoted post said:
Originally Posted by Volnix [IMG]/img/forum/go_quote.gif[/IMG]
Hmmm I might go for one... I have this problem with the seat lately... I am worried about my back angle too...
I figured my seat was too high, moved it down 1.5cm and had all sorts of issues, spent hours with fore/aft up down , eventually settled in .50cm lower than previous with a slightly more forward postion.
At this point I validate my seat position by painn or lack thereof, I never thought half a centimeter would matter but it sure did for me.
-
Quoted post said:
Originally Posted by ira41 [IMG]/img/forum/go_quote.gif[/IMG]
I figured my seat was too high, moved it down 1.5cm and had all sorts of issues, spent hours with fore/aft up down , eventually settled in .50cm lower than previous with a slightly more forward postion.
At this point I validate my seat position by painn or lack thereof, I never thought half a centimeter would matter but it sure did for me.
Actually I get aches on my back after long rides, but they substite my "permanent back aches" so its not too bad, but still bad... [IMG]/img/vbsmilies/smilies/biggrin.gif[/IMG]
I might try to make some adjustments on the seat first my self before going to the "salon"... [IMG]/img/vbsmilies/smilies/biggrin.gif[/IMG] -
ira41 said:
I figured my seat was too high, moved it down 1.5cm and had all sorts of issues, spent hours with fore/aft up down , eventually settled in .50cm lower than previous with a slightly more forward postion. At this point I validate my seat position by painn or lack thereof, I never thought half a centimeter would matter but it sure did for me.
You may want to have a fit done at an LBS. Fore/aft adjustment of the saddle should only be used to position your body/legs correctly (where correctly is defined by how your morphology and how your body works) with respect to the bottom bracket. It shouldn't be used to increase or decrease the reach to the bars.
-
"They were former TSA agents before they started fitting for bicycles."
So...no reach around...no commitment...no breakfast?
-
I really want to say your bike looks absolutely [censored], so I will. Your bike looks like a piece of [censored]! Thats incorrect however, coz that bike looks [censored] hot!
-
Quoted post said:
Originally Posted by San Remo GT [IMG]/img/forum/go_quote.gif[/IMG]
I really want to say your bike looks absolutely [censored], so I will. Your bike looks like a piece of [censored]! Thats incorrect however, coz that bike looks [censored] hot!
It would look hotter without the reflectors on the wheels. [IMG]/img/vbsmilies/smilies/biggrin.gif[/IMG] -
Quoted post said:
Originally Posted by CAMPYBOB [IMG]/img/forum/go_quote.gif[/IMG]
"They were former TSA agents before they started fitting for bicycles."
So...no reach around...no commitment...no breakfast?
You say that like it's a bad thing
-
Quoted post said:
Originally Posted by mpre53 [IMG]/img/forum/go_quote.gif[/IMG]
It would look hotter without the reflectors on the wheels. [IMG]/img/vbsmilies/smilies/biggrin.gif[/IMG]
And the spoke guard between the cassette and spokes on the rear wheel, which actually serve no useful purpose. -
Quoted post said:
Originally Posted by danfoz [IMG]/img/forum/go_quote.gif[/IMG]
And the spoke guard between the cassette and spokes on the rear wheel, which actually serve no useful purpose.
Baby steps, first. Baby steps. Taking off the dork disc is a major leap of faith. [IMG]/img/vbsmilies/smilies/biggrin.gif[/IMG] -
...and the great dork disc debate continues! google.comsearchOpen ↗
I say we celebrate diversity with understanding and..uh...compassion! Let us be inclusive! Let us embrace our inner dork discs! MMMM...feels good. Doesn't it? Now stop that! Stop that now!
Low...High...righty tighty lefty loosey...it's all so confusing!
-
Oh...and in 1972 those were called "Pie Plates". Later, "Dweeb Discs".
Even then, sadly, they were discriminated against...[IMG]/img/vbsmilies/smilies/frown.gif[/IMG]
-
Quoted post said:
Originally Posted by CAMPYBOB [IMG]/img/forum/go_quote.gif[/IMG]
Oh...and in 1972 those were called "Pie Plates". Later, "Dweeb Discs".
Even then, sadly, they were discriminated against...[IMG]/img/vbsmilies/smilies/frown.gif[/IMG]
Between pie plate and dweeb/dork disc, there was Frisbee.
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.