General fitness, health and nutrition · Public discussion

Method for cooking roast beef

Started by Dave · · Last activity · 14 posts · 538 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
General fitness, health and nutrition
Published
15 January 2005
Last activity
20 January 2005
Original author
Dave
Posts
14
Discussion status
Public discussion
Total views
538
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–14 of 14
Posts remain in their original chronological order.

Text size
  1. A friend recommended cooking a roast by placing it in the oven at 500
    degrees for 10 minutes per pound and then turning off the oven and letting
    the roast stay in the oven for four hours. She says it comes out perfect
    every time. Anybody tried this approach? What were the results?

  2. On Sat 15 Jan 2005 11:53:04a, Dave tittered and giggled, and giggled and
    tittered, and finally blurted out...

    Quoted message said:

    A friend recommended cooking a roast by placing it in the oven at 500
    degrees for 10 minutes per pound and then turning off the oven and letting
    the roast stay in the oven for four hours. She says it comes out perfect
    every time. Anybody tried this approach? What were the results?

    It works. The roast will be rare in the middle.

  3. Dave said:

    A friend recommended cooking a roast by placing it in the oven at 500
    degrees for 10 minutes per pound and then turning off the oven and letting
    the roast stay in the oven for four hours. She says it comes out perfect
    every time. Anybody tried this approach? What were the results?


    Rather than leaving the roast in for 4 hours, use a remote reading meat
    thermometer like this
    http://www.elise.com/store/B00004S4U0/Polder_Cooking_Thermometer_with_Timer__Clock.html
    and pull the roast at the right internal temp, probably 125-130° or so.

    And you don't have to shut the oven off - turn it down to say 275°.

    --

    ===============================================================
    Regards

    Louis Cohen

    "Yes, yes, I will desalinate you, you grande morue!"

    Émile Zola, Assommoir 1877

  4. "Dave" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    A friend recommended cooking a roast by placing it in the oven at 500
    degrees for 10 minutes per pound and then turning off the oven and letting
    the roast stay in the oven for four hours. She says it comes out perfect
    every time. Anybody tried this approach? What were the results?

    The timings are wrong. First have the beef at room temperature, oven
    at 500, kitchen well ventilated.

    Put the beef in for 5 min per pound for rare-medium rare. Turn off heat,
    leave for two hours in unopened oven. Comes out perfectly, cooked the
    same the entire way through.

    Reference is Chef Ann Seranne printed in The New New York Times
    Cookbook by Craig Caliborne. Fabulous recipe!

    pavane

  5. "Dave" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    A friend recommended cooking a roast by placing it in the oven at 500
    degrees for 10 minutes per pound and then turning off the oven and letting
    the roast stay in the oven for four hours. She says it comes out perfect
    every time. Anybody tried this approach? What were the results?

    Sorry, Craig Claiborne authored the book. Slippery fingers today.

    pavane

  6. pavane said:

    First have the beef at room temperature, oven
    at 500, kitchen well ventilated.

    Room temperature meat is for sissies. I start my beef
    COLD... that way, I even if I mess up the timing a bit it's
    still rare.

    sf

  7. In article <[email hidden]>,

    Dave said:

    A friend recommended cooking a roast by placing it in the oven at 500
    degrees for 10 minutes per pound and then turning off the oven and letting
    the roast stay in the oven for four hours. She says it comes out perfect
    every time. Anybody tried this approach? What were the results?

    Can't possibly work in all ovens for all likely sizes and shapes of
    roasts.

    If you don't do roasts every day, day after day, in the same oven -- as
    a professional chef does -- then use a meat thermometer.

    I do agree that starting with room-temperature meat (room temperature
    *all the way through*) is a very good idea, but watch out for bacterial
    contamination. McGee suggests putting the meat in warm water in a
    plastic bag to warm it.

    Isaac

  8. "sf" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:
    pavane said:

    First have the beef at room temperature, oven
    at 500, kitchen well ventilated.

    Room temperature meat is for sissies. I start my beef
    COLD... that way, I even if I mess up the timing a bit it's
    still rare.

    That's funny. Do you know any good "...how many does it
    take to..." jokes?

    pavane

  9. "Isaac Wingfield" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    In article <[email hidden]>,

    Dave said:

    A friend recommended cooking a roast by placing it in the oven at 500
    degrees for 10 minutes per pound and then turning off the oven and


    letting

    Quoted message said:
    Quoted message said:

    the roast stay in the oven for four hours. She says it comes out


    perfect

    Quoted message said:
    Quoted message said:

    every time. Anybody tried this approach? What were the results?

    Can't possibly work in all ovens for all likely sizes and shapes of
    roasts.

    If you don't do roasts every day, day after day, in the same oven -- as
    a professional chef does -- then use a meat thermometer.

    It comes pretty close to doing just that...I have used that recipe since
    the late 70's, in probably 12 different home ovens (moved a lot) and
    as long as you use a room temp-ish standing rib roast it does indeed
    work. And as the recipe requires the oven to be closed throughout the
    cooking process you really can't use a meat thermometer, at least the
    ones that were available back when the recipe was devised. And don't
    forget that the timing should be 5 min per pound and a 2 hour rest, not
    4 hours which would cool the roast far too much for any food safety.

    pavane

  10. In article <[email hidden]>,

    pavane said:

    "Isaac Wingfield" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    In article <[email hidden]>,

    Dave said:

    A friend recommended cooking a roast by placing it in the oven at 500
    degrees for 10 minutes per pound and then turning off the oven and


    letting

    Quoted message said:
    Quoted message said:

    the roast stay in the oven for four hours. She says it comes out


    perfect

    Quoted message said:
    Quoted message said:

    every time. Anybody tried this approach? What were the results?

    Can't possibly work in all ovens for all likely sizes and shapes of
    roasts.

    If you don't do roasts every day, day after day, in the same oven -- as
    a professional chef does -- then use a meat thermometer.

    It comes pretty close to doing just that...I have used that recipe since
    the late 70's, in probably 12 different home ovens (moved a lot) and
    as long as you use a room temp-ish standing rib roast it does indeed
    work. And as the recipe requires the oven to be closed throughout the
    cooking process you really can't use a meat thermometer, at least the
    ones that were available back when the recipe was devised. And don't
    forget that the timing should be 5 min per pound and a 2 hour rest, not
    4 hours which would cool the roast far too much for any food safety.

    I don't doubt that the roast woud always get cooked; I just don't think
    that method would give as much control over the product as I like to
    have -- plus or minus not more than a couple or three degrees F, let's
    say.

    I like to cook beef roasts not beyond medium-rare; if it's not very
    pink, I'm not interested in serving it. I try to get my Christmas beef
    tenderloin to the table at 128-130 F internal, for example. I don't
    think the "set it and forget it" method would give anywhere close to the
    control I need for that.

    Isaac

  11. On Tue 18 Jan 2005 09:42:31p, Isaac Wingfield tittered and giggled, and
    giggled and tittered, and finally blurted out...

    Quoted message said:

    I don't doubt that the roast woud always get cooked; I just don't think
    that method would give as much control over the product as I like to
    have -- plus or minus not more than a couple or three degrees F, let's
    say.

    I like to cook beef roasts not beyond medium-rare; if it's not very
    pink, I'm not interested in serving it. I try to get my Christmas beef
    tenderloin to the table at 128-130 F internal, for example. I don't
    think the "set it and forget it" method would give anywhere close to the
    control I need for that.

    Isaac

    Can't please everybody... If it's very pink or red, I'm not interested in
    eating it.

    Wayne

  12. In article <[email hidden]>,

    Wayne Boatwright said:

    On Tue 18 Jan 2005 09:42:31p, Isaac Wingfield tittered and giggled, and
    giggled and tittered, and finally blurted out...

    Quoted message said:

    I don't doubt that the roast woud always get cooked; I just don't think
    that method would give as much control over the product as I like to
    have -- plus or minus not more than a couple or three degrees F, let's
    say.

    I like to cook beef roasts not beyond medium-rare; if it's not very
    pink, I'm not interested in serving it. I try to get my Christmas beef
    tenderloin to the table at 128-130 F internal, for example. I don't
    think the "set it and forget it" method would give anywhere close to the
    control I need for that.

    Isaac

    Can't please everybody... If it's very pink or red, I'm not interested in
    eating it.

    That's OK; to each his own. I'd just mention that if you don't care how
    well-done it's cooked, then it isn't very difficult to cook it...

    Isaac

  13. On Wed 19 Jan 2005 09:08:17p, Isaac Wingfield tittered and giggled, and
    giggled and tittered, and finally blurted out...

    Quoted message said:

    In article <[email hidden]>,

    Wayne Boatwright said:

    On Tue 18 Jan 2005 09:42:31p, Isaac Wingfield tittered and giggled, and
    giggled and tittered, and finally blurted out...

    Quoted message said:

    I don't doubt that the roast woud always get cooked; I just don't
    think that method would give as much control over the product as I
    like to have -- plus or minus not more than a couple or three degrees
    F, let's say.

    I like to cook beef roasts not beyond medium-rare; if it's not very
    pink, I'm not interested in serving it. I try to get my Christmas
    beef tenderloin to the table at 128-130 F internal, for example. I
    don't think the "set it and forget it" method would give anywhere
    close to the control I need for that.

    Isaac

    Can't please everybody... If it's very pink or red, I'm not interested
    in eating it.

    That's OK; to each his own. I'd just mention that if you don't care how
    well-done it's cooked, then it isn't very difficult to cook it...

    Isaac

    Thanks. Actually, I do care. I like roast beef only slightly to
    approaching medium pink. Then it's perfect for me. I don't care for it
    overly well done.

    Wayne

  14. "Isaac Wingfield" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    In article <[email hidden]>,

    pavane said:

    "Isaac Wingfield" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    In article <[email hidden]>,
    "Dave" <[email hidden]> wrote:

    > A friend recommended cooking a roast by placing it in the oven at


    500

    Quoted message said:
    Quoted message said:
    Quoted message said:

    > degrees for 10 minutes per pound and then turning off the oven and


    letting

    Quoted message said:

    > the roast stay in the oven for four hours. She says it comes out


    perfect

    Quoted message said:

    > every time. Anybody tried this approach? What were the results?

    Can't possibly work in all ovens for all likely sizes and shapes of
    roasts.

    If you don't do roasts every day, day after day, in the same oven --


    as

    Quoted message said:
    Quoted message said:
    Quoted message said:

    a professional chef does -- then use a meat thermometer.

    It comes pretty close to doing just that...I have used that recipe since
    the late 70's, in probably 12 different home ovens (moved a lot) and
    as long as you use a room temp-ish standing rib roast it does indeed
    work. And as the recipe requires the oven to be closed throughout the
    cooking process you really can't use a meat thermometer, at least the
    ones that were available back when the recipe was devised. And don't
    forget that the timing should be 5 min per pound and a 2 hour rest, not
    4 hours which would cool the roast far too much for any food safety.

    I don't doubt that the roast woud always get cooked; I just don't think
    that method would give as much control over the product as I like to
    have -- plus or minus not more than a couple or three degrees F, let's
    say.

    I like to cook beef roasts not beyond medium-rare; if it's not very
    pink, I'm not interested in serving it. I try to get my Christmas beef
    tenderloin to the table at 128-130 F internal, for example. I don't
    think the "set it and forget it" method would give anywhere close to the
    control I need for that.

    I agree on need for control, that was Julia Child's reason for rejecting
    this method, as I recall. But it has worked for me, so what can I say?
    I think everyone should try it once, though. Just for the beef industry
    and to satisfy a deep need to do things differently.

    pavane

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.