Cycling Equipment · Public discussion

Megarange Question

Started by Dave Jackson · · Last activity · 6 posts · 928 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
24 October 2003
Last activity
28 October 2003
Original author
Dave Jackson
Posts
6
Discussion status
Public discussion
Total views
928
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–6 of 6
Posts remain in their original chronological order.

Text size
  1. Has anyone here had any dealings with the Shimano Megarange rder and Freewheel?

    I am wondering if they are any good or just stamped out stuff.

    Thanks,

    Dave

  2. Dave Jackson said:

    Has anyone here had any dealings with the Shimano Megarange rder and Freewheel?

    I have used Megarange 7-speed 11-34 cassettes on my MTB, but no freewheels. They've been good to me.

    AFAIK, there's no Megarange-specific rder, just any rder with enough capacity. I had an Altus that
    broke while I was torquing up a slightly rough, long, medium grade. IIRC, the cage broke between the
    two idlers. I replaced it with an XT, which shifted much nicer and hasn't broken.

    Quoted message said:

    I am wondering if they are any good or just stamped out stuff.

    Seem fine to me.

    Quoted message said:

    Thanks,

    Dave


    --
    Rick Onanian

  3. Quoted post said:

    Originally posted by Rick Onanian

    BOn Fri said:

    Has anyone here had any dealings with the Shimano Megarange rder and Freewheel?

    I have used Megarange 7-speed 11-34 cassettes on my MTB, but no freewheels. They've been good to me.

    AFAIK, there's no Megarange-specific rder, just any rder with enough capacity. I had an Altus that
    broke while I was torquing up a slightly rough, long, medium grade. IIRC, the cage broke between the
    two idlers. I replaced it with an XT, which shifted much nicer and hasn't broken.

    Quoted message said:

    I am wondering if they are any good or just stamped out stuff.

    Seem fine to me.

    Quoted message said:

    Thanks,

    Dave


    --
    Rick Onanian [/B]

    Shimano’s freewheels are as good as any being made these days.

    Shimano makes about 4-5 freewheels in 6 and 7 speed Megarange freewheels. The 11-34 (which is also their broadest Megarange) has a new improved freewheel given kudos by Harris Cyclery over the others due an improved body and bearings.

    I’m upgrading an electric this winter to the 11/34 freewheel.

  4. Dave Jackson said:

    Has anyone here had any dealings with the Shimano Megarange rder and Freewheel?

    I am wondering if they are any good or just stamped out stuff.


    I believe most if not all Shimano MTB rders are Megarange but only the cheapest ones made from
    stamped sheet metal have the MegaRange written in big letters.

    GH

  5. Dave Jackson may have said:

    Has anyone here had any dealings with the Shimano Megarange rder and Freewheel?

    I am wondering if they are any good or just stamped out stuff.

    If I am not mistaken, Shimano used the Megarange designator to identify the fact that a given rder
    could handle big sprocket ranges like 12-32, 11-32, and 11-34; it wasn't specifically a der itself,
    it was a characteristic of a bunch of them. Some of the cheaper, low-end ders had the "Megarange"
    label on the der itself; the upper-end ones just had the model name. The higher-end stuff is now
    referred to as "Mega-9" to indicate that it's not only Megarange, but 9-speed capable as well. On
    the cassettes and freewheels, no, the "Megarange" label does not mean "cheap [censored]" although it may
    mean "stamped" since as far as I know all of the Shimano rear sprockets are stampings. I can't see
    any reason to do it any other way.

    --
    My email address is antispammed; pull WEEDS if replying via e-mail. Yes, I have a killfile. If I
    don't respond to something, it's also possible that I'm busy.

  6. Werehatrack <[email hidden]> wrote in message
    news:<[email hidden]>...

    Quoted message said:
    Dave Jackson may have said:

    Has anyone here had any dealings with the Shimano Megarange rder and Freewheel?

    I am wondering if they are any good or just stamped out stuff.

    If I am not mistaken, Shimano used the Megarange designator to identify the fact that a given rder
    could handle big sprocket ranges like 12-32, 11-32, and 11-34; it wasn't specifically a der
    itself, it was a characteristic of a bunch of them. Some of the cheaper, low-end ders had the
    "Megarange" label on the der itself; the upper-end ones just had the model name. The higher-end
    stuff is now referred to as "Mega-9" to indicate that it's not only Megarange, but 9-speed capable
    as well. On the cassettes and freewheels, no, the "Megarange" label does not mean "cheap [censored]"
    although it may mean "stamped" since as far as I know all of the Shimano rear sprockets are
    stampings. I can't see any reason to do it any other way.


    I can get about 2000 miles out of a shimano freewheel they break at the pawls.A cheap hyperglide
    cogset lasts about 4000 miles. I have not broken a freehub pawl yet.Of course your mileage may vary.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.