LX Mega-9 Loosey feeling

Thats why I've been a Sram man. Try some Sram Attack or
Rocket shifter. They come both ways Grip or Trigger. I've
never looked back since.

I MTB 2004

FXTIM said:

I know all the usual complaints against 9spd stuff. I
thought it applied to chains and and cogs. I have had two
sets of LX mega 9 shifter pods go loosey. This is in both
instances the rear der. shifter. I will go to shift and
can push the paddle all the way to the end of it range of
motion with no shift. Then if I let it spring back iand
try again it responds.

Similar problem on my 9-speed road bike, I suspect poor
quality materials inside some of the shifters, I guess
something like the paws (sp?) that you get on free hubs.

My Sram stuff on my mtn bike has no such problems ...
currently.

--
Craig Brossman, Durango Colorado (remove ".nospam" to reply)

FXTIM said:

I have had two sets of LX mega 9 shifter pods go loosey.

Shimano Tech Rep: Are you out on the trail?

Customer: Loosey, I'm home.

Bill "truly sorry for that" S.

Quoted message said:

Similar problem on my 9-speed road bike, I suspect poor
quality materials inside some of the shifters,

Most common way to fix Shimano road shifter problem is to
spray the hell out of the shifter with WD-40. Not sure if
this will work with mtb stuff.

Sorni says:

Quoted message said:

Shimano Tech Rep: Are you out on the trail?

Customer: Loosey, I'm home.

Bill "truly sorry for that" S.

You should be. Bad day at work? ;-)

Steve

Stephen Baker said:

Sorni says:

Quoted message said:

Shimano Tech Rep: Are you out on the trail?

Customer: Loosey, I'm home.

Bill "truly sorry for that" S.

You should be. Bad day at work? ;-)

Work?!?

Bill "oh yeah, right... work" S.

I knew loosey It sounded like tech help vague but it is the best
description of going to shift and pushing the paddle way beyond usual and
getting no response, like nothing is springing. Its only a problem when I
try to switch gears.
"S o r n i" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Stephen Baker said:

Sorni says:

Quoted message said:

Shimano Tech Rep: Are you out on the trail?

Customer: Loosey, I'm home.

Bill "truly sorry for that" S.

You should be. Bad day at work? ;-)

Work?!?

Bill "oh yeah, right... work" S.

"FXTIM" <[email hidden]> wrote in message
news:dcQCc.849138$Pk3.674972@pd7tw1no...

Quoted message said:

I knew loosey It sounded like tech help vague but it is
the best description of going to shift and pushing the
paddle way beyond usual and getting no response, like
nothing is springing. Its only a problem when I try to
switch gears.

Try carefully removing the top cap (usually a couple tiny
screws) and taking a look inside. Then, if it looks like the
'pawls' (sprung metal piece that ratchets) are sticking, do
as the other guy said - spray the hell out of it with WD40
or GT 85 and work the trigger over and over, see if it
loosens. If it does, let it dry off, then put a heap of
lightweight grease in there and put the cap back on.

HTH!

Shaun aRe

"S o r n i" <[email hidden]> wrote in message news:<[email hidden]>...

Quoted message said:

FXTIM said:

I have had two sets of LX mega 9 shifter pods go loosey.

Shimano Tech Rep: Are you out on the trail?

Customer: Loosey, I'm home.

Bill "truly sorry for that" S.

That wasn't even down to your usual (lack of) standards.
--
Jonesy

Jonesy said:

"S o r n i" <[email hidden]> wrote in message
news:<[email hidden]>...

Quoted message said:

FXTIM said:

I have had two sets of LX mega 9 shifter pods go loosey.

Shimano Tech Rep: Are you out on the trail?

Customer: Loosey, I'm home.

Bill "truly sorry for that" S.

That wasn't even down to your usual (lack of) standards.

It was utterly magnificent! I'm laughing as much today as I
did yesterday. More! More!

Tom