Low Priced Bike Parts
Maillard aluminum front quick release hub laced with 36 plated spokes
to a 27 inch Rigida steel wheel
The chrome plating is not perfest but it is surprisingly good $10 plus
$10 shipping
http://www.geocities.com/rory60/steel_front_wheel.JPG
Fuji gray frame fork and headset. 56 cm or 22 inch c to c seat tube 58
cm or 23 inch top tube
$20 UPS shipping is $30
http://www.geocities.com/rory60/fuji_frame_1.JPG
SR Aluminum 170mm left crankarm that fits all older Jap, Korean and
Taiwanese square tapered bottom
brackets.With retaining bolt. $7
Dia Compe center pull brake short reach. 54 to 70mm distance from the
mounting bolt to the shoe
slot. complete with cables triangular cable mount and quick release
fittings to mount on the seat
post bolt $5 one only
Vetta Gel Flex mans black smooth cover saddle. It is 7 inches wide,10
inches long.Soft thick gel
foam over a flexible base.New Old Stock $5
SR Aluminum 26.8 seatpost with no integrated clamp $5 includes the
separate steel sadddle clamp
Click below for a picture:
http://bicycleparts.homestead.com/files/Saddle_post.JPG
Deraillers
Fuji Maeda Ind Japan short open cage rear derailler that comes with a
removable tab to mount under
the rear Axle nuts.if you remove the tab the derailler will mount on
the tab on the frame $5
Shimano freehub spoke protectors one is for 36 spokes and 34 teeth,
another is for 32 spokes and 32
teeth $2 each
Front Deraillers-large offset inner plate in the cage.clamps to a 1
1/8 seatpost,bottom pull,.
Made in China $3-SR spirit that clamps to a 1 1/8 seatpost,bottom
pull. It has a reverse action so that the
shift levers move the same way to shift up or down. Poor cosmetically
$3
http://www.geocities.com/rory60/front_derailler.jpg
Front Forks
RD Fibre one inch threaded fork with aluminum stem and dropouts. The
stem is 7 1/8 inch long with
threads starting at 5 3/4 inches for a 55 to 58 cm frame $45
Stronglight One inch threaded headset Silver with aluminum cups and
roller bearings $15
Early model made in Chicago Schwinn.Refinished in White.The steerer
tube is 6 and 3/4" high threaded
to 5 and 5/8 inches high.The legs are thinner than most,they measure
25 mm wide near the top but
only 10 mm thick.Headset included.
http://rory60.homestead.com/files/whiteschwinnfork.jpg
Standard one inch steerer blue with scratches.The steerer is 132 mm or
5 inches high, threaded to
100 mm or 3 and 7/8 inches.There are unthreaded fender eyelets. The
legs are 25.5 mm or one inch
wide near the top and 18 mm or 3/4 inch thick. there is a box crown
with a chrome plated cover.This
will fit almost all small frames. Headset included.
http://rory60.homestead.com/files/bluefork.jpg
Huffy Mtn Bike one inch Forks $5 each complete with a full headset.one
for 26 inch wheels is
red, the 24 inch wheel fork is black. these require brakes that mount
on a single central hole
in the crown.$5 each
http://www.geocities.com/rory60/huffy_26_and_24_front_forks.jpg
Black resin Mtn Bike brake front lever with orange inner and outer
cables $3
front shfter that clamps on the handlebar with orange inner and outer
cables $3
6 speed index shifters that clamp on the handlebar with black outer
cables. A rear inner cable is
included $5
130 mm bolt on 36 spoke rear hub with 36 spokes and nipples to lace up
a 26 inch Mtn bike rim which
is not included $5
SR 52 tooth aluminum chainring to fit a 120 mm 5 hole bolt pattern
originated by Stronglight for
their 99 and 100 cranks and also used by SR.This bolt pattern measures
70 mm from the center of one
of the 5 bolt holes to the center of the next bolt hole.If yours
measures the same it will fit.This
pattern was used for both doubles and triples.A triple will mount 3
rings on the same bolt pattern
that permits a 28 tooth small chainring.It is nearly new with an
aluminum overide ring to keep the
chain from overshifting the big ring and also to keep your pant cuff
out of the chain. $3
Stems and Handlebars
Profile Aluminum threaded Road Stem 120 mm for a one inch stem
Removable 2 bolt handlebar clamp 26 mm $10
SR aluminum Road Stem short 50 mm reach for handlebars with a one inch
or 25.4 diameter the stem diameter is the
english standard .222 It is longer than usual at 19 cm
Similar Nitto Youth 80 MM reach i6 cm length $5 each
Tioga Prestige butted steel black Mtn Bike threaded one inch 135 mm $5
two steel 10 speed handlebars and steel stems. The chrome plating is
still good. One bar is 13"wide
edge to edge 5"reach c to c and 5 1/2"drop c to c. The other is 16
1/2-5 1/2-5 3/4. Both stems have
a reach of 2 1/4" and a stem diameter of about 20mm. Either bar and
stem is $15 plus $7 shipping.
Nitto B115 420 aluminum 10 speed handlebar with one inch or 25.4 mm
clamping area $15
Fuji Nitto Olympeade Steel 10 speed Handlebar 15 1/2"c to c 4 1/2"
reach 6"drop. only a lttle rust $5
Steel Mtn Bike handlebars,one is flat black with a 6 degree
pullback,another is black 23"wide with a
6 degee pullback,the last is 23"wide gray with an 8 degree pullback.
$5 each
priority mail is $4.50 additional on most items.Pay Pal OK.
Phone 732 566 2865 Aberdeen NJ Paypal name DonaldORourke Pay Pal fee
is 2.9% plus .30
cents more https://secure.paypal.com/affil/pal...40optonline.net