Mountain Bikes · Public discussion

light battery

Started by Fish · · Last activity · 32 posts · 1,531 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Mountain Bikes
Published
15 March 2005
Last activity
5 April 2005
Original author
Fish
Posts
32
Discussion status
Public discussion
Total views
1,531
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 21–32 of 32
Posts remain in their original chronological order.

Text size
  1. "Fish" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:


    "Fish" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    I have purchased the new battery and I have acheived my goal better than
    expected
    I have Doubled the size and Weight of my bettery but I now have gained


    (in

    Quoted message said:

    theory at least) x 2.85714 runtime which now means basically

    .9KG battery weigh = 2 hours runtime
    1.8 Kg battery weight = just under 6 hours runtime

    (assuming the batteries are of equal quality) and I still have the


    original

    Quoted message said:

    battery so if I ever go on a particulally long ride I can take this with


    me

    Quoted message said:

    as an ermergency backup) I have also Purchased a 5W bult so I can


    effectivly

    Quoted message said:

    run the thing at 1/2 power thus doubling the runtime again.

    Anyone looking to do this upgrade the Maplin's Part numbers are as
    follows

    Battery UD 08 its the 6v 12Ah one but you can go for any in that range.


    You

    Quoted message said:

    could also fit a smaller battery if you take short rides and are
    concerned
    about weight/size commuting etc.
    Bulb MR11 6v 5W Make sure you get the 35mm one.
    Fuse's just in case you short it out while screwing around PC91.

    I may even do some reasearch into the dynamo rechargeable one now because


    Im

    Quoted message said:

    bored and it seem's like a good idea.

    I have justs tested this setup and I got about 5Hr's 10 Min's out of the
    battery withouyt any charging whatsoever thats with the light on
    contibuosly
    on full beam so I think Ive managed to get pretty good runtime out of the
    thing

    Quoted message said:



    I'm impressed. 🙂

  2. "Ne><uS" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:


    "Fish" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:


    "Fish" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    I have purchased the new battery and I have acheived my goal better


    than

    Quoted message said:
    Quoted message said:
    Quoted message said:

    expected
    I have Doubled the size and Weight of my bettery but I now have gained


    (in

    Quoted message said:

    theory at least) x 2.85714 runtime which now means basically

    .9KG battery weigh = 2 hours runtime
    1.8 Kg battery weight = just under 6 hours runtime

    (assuming the batteries are of equal quality) and I still have the


    original

    Quoted message said:

    battery so if I ever go on a particulally long ride I can take this


    with

    Quoted message said:
    Quoted message said:

    me

    Quoted message said:

    as an ermergency backup) I have also Purchased a 5W bult so I can


    effectivly

    Quoted message said:

    run the thing at 1/2 power thus doubling the runtime again.

    Anyone looking to do this upgrade the Maplin's Part numbers are as
    follows

    Battery UD 08 its the 6v 12Ah one but you can go for any in that range.


    You

    Quoted message said:

    could also fit a smaller battery if you take short rides and are
    concerned
    about weight/size commuting etc.
    Bulb MR11 6v 5W Make sure you get the 35mm one.
    Fuse's just in case you short it out while screwing around PC91.

    I may even do some reasearch into the dynamo rechargeable one now


    because

    Quoted message said:
    Quoted message said:

    Im

    Quoted message said:

    bored and it seem's like a good idea.

    I have justs tested this setup and I got about 5Hr's 10 Min's out of the
    battery withouyt any charging whatsoever thats with the light on
    contibuosly
    on full beam so I think Ive managed to get pretty good runtime out of


    the

    Quoted message said:
    Quoted message said:

    thing

    Quoted message said:



    I'm impressed. 🙂

    Me too. I'm also highly impressed with his back muscles...

    Shaun aRe - No room to talk - the batteries for my 50W home made light weigh
    close to 7lb.

  3. "Shaun aRe" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:


    "Ne><uS" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:


    "Fish" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:


    "Fish" <[email hidden]> wrote in message
    news:[email hidden]...
    > I have purchased the new battery and I have acheived my goal better


    than

    Quoted message said:
    Quoted message said:

    > expected
    > I have Doubled the size and Weight of my bettery but I now have


    gained

    Quoted message said:
    Quoted message said:
    Quoted message said:

    (in
    > theory at least) x 2.85714 runtime which now means basically
    >
    > .9KG battery weigh = 2 hours runtime
    > 1.8 Kg battery weight = just under 6 hours runtime
    >
    > (assuming the batteries are of equal quality) and I still have the
    original
    > battery so if I ever go on a particulally long ride I can take this


    with

    Quoted message said:
    Quoted message said:

    me
    > as an ermergency backup) I have also Purchased a 5W bult so I can
    effectivly
    > run the thing at 1/2 power thus doubling the runtime again.
    >
    > Anyone looking to do this upgrade the Maplin's Part numbers are as
    > follows
    >
    > Battery UD 08 its the 6v 12Ah one but you can go for any in that


    range.

    Quoted message said:
    Quoted message said:
    Quoted message said:

    You
    > could also fit a smaller battery if you take short rides and are
    > concerned
    > about weight/size commuting etc.
    > Bulb MR11 6v 5W Make sure you get the 35mm one.
    > Fuse's just in case you short it out while screwing around PC91.
    >
    > I may even do some reasearch into the dynamo rechargeable one now


    because

    Quoted message said:
    Quoted message said:

    Im
    > bored and it seem's like a good idea.

    I have justs tested this setup and I got about 5Hr's 10 Min's out of


    the

    Quoted message said:
    Quoted message said:
    Quoted message said:

    battery withouyt any charging whatsoever thats with the light on
    contibuosly
    on full beam so I think Ive managed to get pretty good runtime out of


    the

    Quoted message said:
    Quoted message said:

    thing
    >
    >


    I'm impressed. 🙂

    Me too. I'm also highly impressed with his back muscles...

    Shaun aRe - No room to talk - the batteries for my 50W home made light


    weigh

    Quoted message said:

    close to 7lb.

    I suppose it all depends on what your after I already carry quite a heavy
    pack anyway quick rundown:-
    Pump, Spare inner tube, toolkit to repair pretty much anything that could go
    wrong, spade ( this is a tradition from back home for repairing trails i
    dunno if everyone does it), seatpost / seat I have to carry a long one for
    the 5 mile ride to my "local" trails and obviously a shorter one for
    actually riding the trails I have a [censored] frame!!, Helmet/hat I use the
    hat for the ride there and the helmets for when I get there, first aid kit
    (you never know),water (theres 2 KG easy) , food sometimes , warm clothing
    for winter and ciggies / lighter. All of this stuff has proven itself to be
    useful to me and I wouldnt ever go trail riding without it so an extra
    weight in the pack I hardly even notice.

    Just a note in case Mike is reading this I only carry the spade for
    repairing damage I couldnt use it for building a trail even if I wanted to.
    and I have used it several times esp when visiting a new set of trails which
    hasnt quite bedded in and you get a really nasty pothole with no way to
    avoid it or when some idiot has wacked a near impossible jump right in your
    path.
    I have nothing agiast jumps ...but if you going to stick them on a trail
    make sure everyone can ride them even if they dont jump.

    Quoted message said:


  4. "Shaun aRe" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:


    "Ne><uS" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:


    "Fish" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:


    "Fish" <[email hidden]> wrote in message
    news:[email hidden]...
    > I have purchased the new battery and I have acheived my goal better


    than

    Quoted message said:
    Quoted message said:

    > expected
    > I have Doubled the size and Weight of my bettery but I now have gained
    (in
    > theory at least) x 2.85714 runtime which now means basically
    >
    > .9KG battery weigh = 2 hours runtime
    > 1.8 Kg battery weight = just under 6 hours runtime
    >
    > (assuming the batteries are of equal quality) and I still have the
    original
    > battery so if I ever go on a particulally long ride I can take this


    with

    Quoted message said:
    Quoted message said:

    me
    > as an ermergency backup) I have also Purchased a 5W bult so I can
    effectivly
    > run the thing at 1/2 power thus doubling the runtime again.
    >
    > Anyone looking to do this upgrade the Maplin's Part numbers are as
    > follows
    >
    > Battery UD 08 its the 6v 12Ah one but you can go for any in that
    > range.
    You
    > could also fit a smaller battery if you take short rides and are
    > concerned
    > about weight/size commuting etc.
    > Bulb MR11 6v 5W Make sure you get the 35mm one.
    > Fuse's just in case you short it out while screwing around PC91.
    >
    > I may even do some reasearch into the dynamo rechargeable one now


    because

    Quoted message said:
    Quoted message said:

    Im
    > bored and it seem's like a good idea.

    I have justs tested this setup and I got about 5Hr's 10 Min's out of
    the
    battery withouyt any charging whatsoever thats with the light on
    contibuosly
    on full beam so I think Ive managed to get pretty good runtime out of


    the

    Quoted message said:
    Quoted message said:

    thing
    >
    >


    I'm impressed. 🙂

    Me too. I'm also highly impressed with his back muscles...

    Shaun aRe - No room to talk - the batteries for my 50W home made light
    weigh
    close to 7lb.


    That's a pretty big bulk. What are you using now? I'm using a light with
    those super bright white LED's.


  5. Quoted message said:
    Quoted message said:



    That's a pretty big bulk. What are you using now? I'm using a light with
    those super bright white LED's.

    Basically I have bought a 12Ah battery to replace the 4.2Ah battery the


    new battery is twice as big but give much better runtime more than 2x
    I have also bough a bulb with 1/2 wattage which will be suitable for using
    on the road but not off road.

    But apart from that its exactly the same system I just switched the wires
    over on the battery even the same terminals and away I go ...need to arounge
    some housing for the battery to get any water out but apart from that its A
    ok

  6. "Fish" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:


    Quoted message said:
    Quoted message said:



    That's a pretty big bulk. What are you using now? I'm using a light
    with
    those super bright white LED's.

    Basically I have bought a 12Ah battery to replace the 4.2Ah battery the


    new battery is twice as big but give much better runtime more than 2x
    I have also bough a bulb with 1/2 wattage which will be suitable for using
    on the road but not off road.

    But apart from that its exactly the same system I just switched the wires
    over on the battery even the same terminals and away I go ...need to
    arounge
    some housing for the battery to get any water out but apart from that its
    A
    ok


    Could have done with something like that years ago. I had to do 10 miles on
    road at night, a lot of the time the batteries would go on the trip home,
    (police nearly kicked my [censored] about it but I was lucky because they were
    concentrating on a recent crash.)

  7. "Ne><uS" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:


    "Shaun aRe" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:


    "Ne><uS" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:


    "Fish" <[email hidden]> wrote in message
    news:[email hidden]...
    >
    > "Fish" <[email hidden]> wrote in message
    > news:[email hidden]...
    >> I have purchased the new battery and I have acheived my goal better


    than

    Quoted message said:

    >> expected
    >> I have Doubled the size and Weight of my bettery but I now have


    gained

    Quoted message said:
    Quoted message said:
    Quoted message said:

    > (in
    >> theory at least) x 2.85714 runtime which now means basically
    >>
    >> .9KG battery weigh = 2 hours runtime
    >> 1.8 Kg battery weight = just under 6 hours runtime
    >>
    >> (assuming the batteries are of equal quality) and I still have the
    > original
    >> battery so if I ever go on a particulally long ride I can take this


    with

    Quoted message said:

    > me
    >> as an ermergency backup) I have also Purchased a 5W bult so I can
    > effectivly
    >> run the thing at 1/2 power thus doubling the runtime again.
    >>
    >> Anyone looking to do this upgrade the Maplin's Part numbers are as
    >> follows
    >>
    >> Battery UD 08 its the 6v 12Ah one but you can go for any in that
    >> range.
    > You
    >> could also fit a smaller battery if you take short rides and are
    >> concerned
    >> about weight/size commuting etc.
    >> Bulb MR11 6v 5W Make sure you get the 35mm one.
    >> Fuse's just in case you short it out while screwing around PC91.
    >>
    >> I may even do some reasearch into the dynamo rechargeable one now


    because

    Quoted message said:

    > Im
    >> bored and it seem's like a good idea.
    >
    > I have justs tested this setup and I got about 5Hr's 10 Min's out of
    > the
    > battery withouyt any charging whatsoever thats with the light on
    > contibuosly
    > on full beam so I think Ive managed to get pretty good runtime out of


    the

    Quoted message said:

    > thing
    >>
    >>
    >
    >
    I'm impressed. 🙂

    Me too. I'm also highly impressed with his back muscles...

    Shaun aRe - No room to talk - the batteries for my 50W home made light
    weigh
    close to 7lb.


    That's a pretty big bulk. What are you using now? I'm using a light with
    those super bright white LED's.

    It only gets used on occasion, usually for commuting.

    Shaun aRe


  8. Quoted message said:
    Quoted message said:


    Have you considered getting a bike light with Bright White LED's?

    I have a Cateye HL-EL300. I've not run the batteries out yet and the spot
    it produces is very clear, (i'd say it can project the spot well over


    60ft.)

    Quoted message said:

    I can't remember runtimes on it, but as soon as battery power drops to a
    certain level it sacrifices a couple of the LED's to maintain runtime,


    (not

    Quoted message said:

    sure on it's brightness though.)

    Bottom line: It uses only 4 AA's and it's maximum runtime is something
    stupid like 30 hours.

    They do have better now, but have a look anyway. They may be pricy, but
    they pay for themselves in the long run.


    I suppose my next project could be to Attempt to convert this light into one
    that runs off the Super bright LED's .. Just get a superbright LED cluster
    and fit a couple of prongs to mount it into the holder and Im sorted
    ......except one small thing ..... somehow Ive fried my charger so I cant use
    the dammed light now


  9. Quoted message said:

    I suppose my next project could be to Attempt to convert this light into
    one
    that runs off the Super bright LED's .. Just get a superbright LED cluster
    and fit a couple of prongs to mount it into the holder and Im sorted
    .....except one small thing ..... somehow Ive fried my charger so I cant
    use
    the dammed light now


    Ahhhh, [censored]!

    Noticed a while ago some company was making house lights that would plug
    into the normal bayonet type fittings.

    And yes, i'm pretty sure I came across light clusters to replace those
    xeon/xenon lightbulbs.


  10. Quoted message said:

    It only gets used on occasion, usually for commuting.

    Shaun aRe


    That I can imagine, doubt if you'd wanna lug that around on long hauls. 🙂

    I haven't even replaced the batteries in my torch and I got that back in feb
    of 2004!

  11. Shaun aRe said:

    "Ne><uS" <[email hidden]> wrote

    Quoted message said:
    Quoted message said:

    How many batteries do you need to run that? 😉

    Quoted message said:

    About 6 or 7 lbs LMAO! ',;~}~

    By definition, those /aren't/ "light batteries".

    Will grab me hat now, BS

  12. "Bill Sornson" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:
    Shaun aRe said:

    "Ne><uS" <[email hidden]> wrote

    Quoted message said:
    Quoted message said:

    How many batteries do you need to run that? 😉

    Quoted message said:

    About 6 or 7 lbs LMAO! ',;~}~

    By definition, those /aren't/ "light batteries".

    Will grab me hat now, BS


    Exit stage right dear chap. 😉

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.