George have U checked with Carey Chen yet? Carey is our resident Guru on all things bent...www.ucycle.com 2nd up would be John Riley. IF all you need is a Lexan Blank, try Cambie in Vancouver. ----------------------------------------
"Bob" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:
I am certain this will not be a new question for seasoned members of this news group. That's why I am posing it.
I have been searching for instructions to build my own lexan fairing for
my
Quoted message said:
'99 rocket.
I have seen Rick Wasserman's web page. Excellent work. Of course there
are
Quoted message said:
the manufacterers and retailers contributions.
I live in Burlington Ontario. A couple of years ago I heard of a rider in Toronto who has making lexan fairings.
If any one could point me in the right direction I would appreciate it.
To begin with, "Lexan" is a brand name. It's one of several that are used for polycarbonate plastic. It's usually sold by the pound and is very expensive. Typically, a 4' X 8' sheet, 1/16" thick, would go for about $80., US. It has to be heated to about 325 degrees F in an autoclave to gravity-drape it around a form or to about 310 degrees F to press it into a new shape. It's also hydrophyllic, meaning that it absorbs water. It has to be heat-cured for about 24 hours at 180 degrees F, to evaporate all the water from it. If it isn't dried out first, heating to the re-shaping temperatures will expand the water inside into steam bubbles, which cloud the plastic and weaken it. Nice thing about polycarbonate is that it's very difficult to break and it can easily be cut or sawed and shaved along the edges with tools to shape it. Try any of those things with acrylic plastic and unless you're very careful, skillful and lucky, you'll crack it.
[email hidden] (Steve McDonald) wrote in message news:<[email hidden]>...
Quoted message said:
To begin with, "Lexan" is a brand name. It's one of several that are used for polycarbonate plastic. It's usually sold by the pound and is very expensive. Typically, a 4' X 8' sheet, 1/16" thick, would go for about $80., US. It has to be heated to about 325 degrees F in an autoclave to gravity-drape it around a form or to about 310 degrees F to press it into a new shape. It's also hydrophyllic, meaning that it absorbs water. It has to be heat-cured for about 24 hours at 180 degrees F, to evaporate all the water from it. If it isn't dried out first, heating to the re-shaping temperatures will expand the water inside into steam bubbles, which cloud the plastic and weaken it. Nice thing about polycarbonate is that it's very difficult to break and it can easily be cut or sawed and shaved along the edges with tools to shape it. Try any of those things with acrylic plastic and unless you're very careful, skillful and lucky, you'll crack it.
Steve McDonald
Fascinating Steve! I had no idea of the temps. I have aZzipper Lexan fairing on my TT, and I decided to experiment with different mounts/positions, and then replace it because of all the scratches from moving and glue spots. Seems I was right since I cannot smooth it out when finished. Helpful info! So far- an expensive umbrella!!
[email hidden] (Steve McDonald) wrote in message news:<[email hidden]>...
Quoted message said:
To begin with, "Lexan" is a brand name. It's one of several that are used for polycarbonate plastic. It's usually sold by the pound and is very expensive. Typically, a 4' X 8' sheet, 1/16" thick, would go for about $80., US. It has to be heated to about 325 degrees F in an autoclave to gravity-drape it around a form or to about 310 degrees F to press it into a new shape. It's also hydrophyllic, meaning that it absorbs water. It has to be heat-cured for about 24 hours at 180 degrees F, to evaporate all the water from it. If it isn't dried out first, heating to the re-shaping temperatures will expand the water inside into steam bubbles, which cloud the plastic and weaken it. Nice thing about polycarbonate is that it's very difficult to break and it can easily be cut or sawed and shaved along the edges with tools to shape it. Try any of those things with acrylic plastic and unless you're very careful, skillful and lucky, you'll crack it.
Steve McDonald
This is the process (and the problems encountered) that Zzipper uses to make their fairing bubbles. They sell "experimenter" bubbles for $90.
You can rub out a lot of the scuffs and scratches from fairings made of polycarbonate or other types of plastic. You need some fine-textured rubbing compound, such as Meguiar's Plastic Polish and a good rubbing cloth, which is also sold at large auto supply or professional paint stores. Don't use the rough-grained compounds intended to smooth paint. The windshields of aircraft are usually made of polycarbonate or an impact-resistant type of Plexiglas. The maintenance workers at aircraft companies or the aircraft technology departments at colleges are good places to get instruction on how to properly do this. It takes lots of time and elbow grease. Power buffers are not recommended, although some people make risk more deep scuffing lines by using them.
