UK and Europe · Public discussion

Jammed alloy seat post.

Started by Robert Norton · · Last activity · 7 posts · 663 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
UK and Europe
Published
23 July 2005
Last activity
26 July 2005
Original author
Robert Norton
Posts
7
Discussion status
Public discussion
Total views
663
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–7 of 7
Posts remain in their original chronological order.

Text size
  1. My Dawes Galaxy has a jammed seat post. WD40 has not helped to free it. My
    local shop recommends Jeyes Fluid (old time disinfectant) poured into the
    frame but that seems a bit drastic. Any suggestions?
    Thanks, Rob

  2. Robert Norton said:

    My Dawes Galaxy has a jammed seat post. WD40 has not helped to free it. My
    local shop recommends Jeyes Fluid (old time disinfectant) poured into the
    frame but that seems a bit drastic. Any suggestions?
    Thanks, Rob

    As usual, the Great One has some answers:

    http://www.sheldonbrown.com/stuck-seatposts.html

    I think you want the ammonia tip to shift your seatpost. Remember to use
    anti-seize or grease when you fit the new one 🙂

    Regards,

    -david

  3. Robert Norton said:

    My Dawes Galaxy has a jammed seat post.......

    I've always found sticking the post in a vice and turning the frame
    works

  4. David Nutter said:


    As usual, the Great One has some answers:

    http://www.sheldonbrown.com/stuck-seatposts.html

    I think you want the ammonia tip to shift your seatpost. Remember to use
    anti-seize or grease when you fit the new one 🙂

    Those are all good advice but there is one more that I know Sheldon
    doesn't like but which has worked for me. Drill a hole across the
    seatpost, insert a steel bar through it and use a lump hammer on the bar
    right next to the seatpost to impact it out. Sometimes just hitting the
    top of the seatpost to drive it further into the frame by a few mm can
    be enough to break any chemical bonding that has occurred before
    applying Sheldon's other suggestions.

    Good luck

    --
    Tony

    "I did make a mistake once - I thought I'd made a mistake but I hadn't"
    Anon

  5. Robert Norton said:

    My Dawes Galaxy has a jammed seat post. WD40 has not helped to free it. My
    local shop recommends Jeyes Fluid (old time disinfectant) poured into the
    frame but that seems a bit drastic. Any suggestions?
    Thanks, Rob

    Give it to the bike shop. The cost of the job is penance for not
    greasing it regularly ;-)

  6. Robert Norton said:

    My Dawes Galaxy has a jammed seat post. WD40 has not helped to free it. My
    local shop recommends Jeyes Fluid (old time disinfectant) poured into the
    frame but that seems a bit drastic. Any suggestions?
    Thanks, Rob

    Give it to the bike shop. The cost of the job is penance for not
    greasing it regularly ;-)

  7. Robert Norton said:

    My Dawes Galaxy has a jammed seat post. WD40 has not helped to free it. My
    local shop recommends Jeyes Fluid (old time disinfectant) poured into the
    frame but that seems a bit drastic. Any suggestions?
    Thanks, Rob

    Give it to the bike shop. The cost of the job is penance for not
    greasing it regularly ;-)

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.