indexed steering and handling?

John Albergo said:

The FAQ item states "...there is no possibility of injury or damage from 'indexed' steering head
bearings". - I would take that to imply no adverse effects on handling. However I have been
noticing sometimes squirelly handling in low speed maneuvers and can find nothing to blame it on
other than my steering has become heavily indexed.

The hub bearings turn freely with no appreciable play, tires are in good shape. Wheels are true
enough and alignment looks okay. No serious falls. I see no frame cracks. I don't think I've
developed any balance problems.

Is it possible for an indexed headset to introduce handling problems during low-speed turns where
the front wheel is actually involved in "steerng"?

Yeah, probably. But we are talking about slow speeds, where injury is not a big risk.

There are cures for indexed steering. Re-pack the headset with loose balls rather than the usual
bearing cage, and add one more ball than was there before. Really, replace them all, but put an
extra in. If that doesn't work, the next step is to knock out the cups and re-install them.

--

David L. Johnson

__o | A mathematician is a machine for turning coffee into theorems. _`\(,_ | -- Paul Erdos
(_)/ (_) |

John Albergo said:

Is it possible for an indexed headset to introduce handling problems during low-speed turns where
the front wheel is actually involved in "steering"?

Only when riding no-hands and only after the slack has been taken out so that it "indexes" to a
preferred position. Otherwise, the clunk when braking on uneven surfaces is highly disturbing to
the rider.

Jobst Brandt [email hidden] Palo Alto CA

Quoted message said:

From: John Albergo

Quoted message said:

Is it possible for an indexed headset to introduce handling problems during

low-speed turns where the front wheel is actually involved in steerng"?

It's not so much a "handling" problem as it is a balance problem. A bike needs to lean to turn with
stability. At low speed, turning the wheel creates instability, i.e., you're forcing it to lean but
there is not enough forward momentum to keep it from falling over. The squirelliness is the result
of balance adjustments needed to keep the bike upright. Ever notice how you regain stability in a
very low speed turn by merely pushing hard on a pedal?

Sig Chicago

Sig snipes anonymously:

Quoted message said:

Quoted message said:

Is it possible for an indexed headset to introduce handling problems during low-speed turns where
the front wheel is actually involved in steering"?

Quoted message said:

It's not so much a "handling" problem as it is a balance problem. A bike needs to lean to turn
with stability. At low speed, turning the wheel creates instability, i.e., you're forcing it to
lean but there is not enough forward momentum to keep it from falling over. The squirelliness is
the result of balance adjustments needed to keep the bike upright. Ever notice how you regain
stability in a very low speed turn by merely pushing hard on a pedal?

That's the greatest compendium of gobbledygook on bicycle stability seen here in a long time.
Balancing a bicycle is a dynamic exercise that goes into static balance as forward motion approaches
zero. Then it becomes a track stand, aka body balancing. "Pushing hard on the pedal" aka
accelerating is a dynamic effect that causes centrifugal acceleration, the means by which a single
track vehicle is balanced.

So back to the question. What effect does a dimpled head bearing have on control?

Jobst Brandt [email hidden] Palo Alto CA

Sig snipes anonymously:

Quoted message said:

Quoted message said:

Is it possible for an indexed headset to introduce handling problems during low-speed turns where
the front wheel is actually involved in steering"?

Quoted message said:

It's not so much a "handling" problem as it is a balance problem. A bike needs to lean to turn
with stability. At low speed, turning the wheel creates instability, i.e., you're forcing it to
lean but there is not enough forward momentum to keep it from falling over. The squirelliness is
the result of balance adjustments needed to keep the bike upright. Ever notice how you regain
stability in a very low speed turn by merely pushing hard on a pedal?

That's the greatest compendium of gobbledygook on bicycle stability seen here in a long time.
Balancing a bicycle is a dynamic exercise that goes into static balance as forward motion approaches
zero. Then it becomes a track stand, aka body balancing. "Pushing hard on the pedal" causing
acceleration is dynamic and causes centrifugal acceleration, the means by which a single track
vehicle is balanced.

So back to the question. What effect does a dimpled head bearing have on control?

Jobst Brandt [email hidden] Palo Alto CA

--------------030908060709030405030402 Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

Scic said:

Quoted message said:

From: John Albergo

Quoted message said:

Is it possible for an indexed headset to introduce handling problems during

low-speed turns where the front wheel is actually involved in steerng"?

It's not so much a "handling" problem as it is a balance problem. A bike needs to lean to turn with
stability. At low speed, turning the wheel creates instability, i.e., you're forcing it to lean but
there is not enough forward momentum to keep it from falling over. The squirelliness is the result
of balance adjustments needed to keep the bike upright. Ever notice how you regain stability in a
very low speed turn by merely pushing hard on a pedal?

I'm not talking about the increased balance demands of a slow bike. There are vague discontinuities
when negotiating slow turns that seem to have developed. My balance seems ok; at least I can walk
around in the dark with my eyes closed, stand on one leg with eyes closed, turning my head about
and so forth. I don't seem to have balance issues in other realms, just these squirrely moments in
slow turns.

--------------030908060709030405030402 Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <title></title>
</head> <body> <br> <br> Scic wrote:<br> <blockquote type="cite"
cite="[email hidden]"> <blockquote type="cite"> <pre
wrap="">From: John Albergo </pre> </blockquote> <pre wrap=""><!----> </pre> <blockquote
type="cite"> <pre wrap="">Is it possible for an indexed headset to introduce handling problems
during </pre> </blockquote> <pre wrap=""><!---->low-speed turns where the front wheel is actually
involved in steerng"?

It's not so much a "handling" problem as it is a balance problem. A bike needs to lean to turn with
stability. At low speed, turning the wheel creates instability, i.e., you're forcing it to lean but
there is not enough forward momentum to keep it from falling over. The squirelliness is the result
of balance adjustments needed to keep the bike upright. Ever notice how you regain stability in a
very low speed turn by merely pushing hard on a pedal? </pre> </blockquote> I'm not talking about
the increased balance demands of a slow bike. There are vague discontinuities when negotiating
slow turns that seem to have developed. My balance seems ok; at least I can walk around in the
dark with my eyes closed, stand on one leg with eyes closed, turning my head about and so forth.
I don't seem to have balance issues in other realms, just these squirrely moments in slow
turns. <br> </body> </html>

--------------030908060709030405030402--

--------------080301020402010608010507 Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

Quoted message said:

John Albergo said:

Is it possible for an indexed headset to introduce handling problems during low-speed turns where
the front wheel is actually involved in "steering"?

Only when riding no-hands and only after the slack has been taken out so that it "indexes" to a
preferred position. Otherwise, the clunk when braking on uneven surfaces is highly disturbing to
the rider.

No clunks and it definitely has a preferred position; or rather several. Straight ahead and then
about 30' and 60' on both sides. With bike raised and level I can push the wheel up to about 10' to
the side and it will return on its own. Push a little further and it will continue to the next stop.
It's difficult to walk the bike by pushing the seat because you have to give it a good swing to get
the wheel to move. This is quite noticeable since I negotiate a tight hallway with two 90' turns
twice a day. Pushing the seat and tilting used to work fine now I have to reach forward and
manipulate the steerer. The road handling issues are with hands on though. If there is odd movement
somewhere else I can't find it. The advantage is that parking is more stable when leaning the bike
against a pole, etc. Reminds me of my old flick-stand.

--------------080301020402010608010507 Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta
http-equiv="Content-Type" content="text/html;charset=ISO-8859-1"> <title></title> </head> <body>
<br> <br> <a class="moz-txt-link-abbreviated"
href=""][email hidden]">[email hidden]</a> wrote:<br>
<blockquote type="cite" cite="[email hidden]"> <pre wrap="">John
Albergo writes:

</pre> <blockquote type="cite"> <pre wrap="">Is it possible for an indexed headset to introduce
handling problems during low-speed turns where the front wheel is actually involved in "steering"?
</pre> </blockquote> <pre wrap=""><!----> Only when riding no-hands and only after the slack has
been taken out so that it "indexes" to a preferred position. Otherwise, the clunk when braking on
uneven surfaces is highly disturbing to the rider. </pre> </blockquote> No clunks and it
definitely has a preferred position; or rather several. Straight ahead and then about 30'
and 60' on both sides. With bike raised and level I can push the wheel up to about 10' to
the side and it will return on its own. Push a little further and it will continue to the
next stop. It's difficult to walk the bike by pushing the seat because you have to give it a
good swing to get the wheel to move. This is quite noticeable since I negotiate a tight
hallway with two 90' turns twice a day. Pushing the seat and tilting used to work fine now I
have to reach forward and manipulate the steerer. The road handling issues are with hands on
though. If there is odd movement somewhere else I can't find it. The advantage is that
parking is more stable when leaning the bike against a pole, etc. Reminds me of my old
flick-stand.<br> <br> <br> </body> </html>

--------------080301020402010608010507--

Scic said:

A brinelled (pitted, dented) crown race or lower cup will give you notched steering but not
instability as long as your hands are on the bars.

No-handed, you have to repeatedly turn one way or the other to go straight; the no-handed turns are
fine but the bike is unstable going straight until it's fallen far enough to force you to produce a
fairly large countersteer each time. You can't do small countersteers, is the problem.
--
Ron Hardin [email hidden]

On the internet, nobody knows you're a jerk.

anonymous said:

Quoted message said:

I don't seem to have balance issues in other realms, just these squirrely moments in slow turns.

Quoted message said:

I know your sense of balance isn't the problem. A brinelled (pitted, dented) crown race or lower
cup will give you notched steering but not instability as long as your hands are on the bars.

Hey! Enough of this BS myth and lore. No wonder you snipe from anonymity.

Quoted message said:

Have you had the headset overhauled recently? Have you (or anyone else) crashed? Or hit something
hard, perhaps a curb? I would suggest you remove the fork and check if the steerer tube has been
bent at the crown. Also check that the crown race and lower cup are seated square to the steerer
and headtube.

draco.acs.uci.edu8f.13.htmlOpen ↗

Jobst Brandt [email hidden] Palo Alto CA