I could use some advice...

Dunno what you mean by bicycle or tricycle unicycles unless you mean
unicycles with some sort of auxilliary wheels for stability when you're
learning. (There is something like a skate cycle that I think is a
unicycle, but with a skateboard truck on the back to help with
stability.)

All these ideas are daft. With enthusiasm and a bit of effort, you can
learn to ride a unicycle in about 5 - 10 hours of half hour sessions,
without these gimmicks. After that, it's just practise practise
practise to improve and to develop new skills. It's agreat hobby, and
you can explore it in may different ways, ranging from long distance
touring (yes, really - 100 mile days are possible) to trials (hopping
onto and from obstacles and across gaps) to freestyle (the unicycle
equivalent of ice dancing?) to MUNi (mountain unicycling) and so on.

So, what to buy? the accepted wisdom is to buy a mid range uni with a
20 inch wheel as a first machine. When you know a bit more about what
aspects of the sport you enjoy, you upgrade and tune the uni, and
eventually buy a different one that really suits you.

if you are quite tall, you might prefer a 24 inch wheel as your first
machine. There are pros and cons. Bigger wheels are faster and
smoother to ride, but less nimble.

Go to www.unicycle.com
or (in the UK) to
www.unicycle.uk.com

And look at the Yuni (known in the UK as the Nimbus). Others may
recommend the Torker. You won't get rubbish from unicycle.com. You
might get rubbish from a local bike shop. Many local bike shops have a
cheap crummy unicycle in stock that they've had since Adam was a lad.

Have a look at the websites then come back with more questions. :0)

--
Mikefule - Roland Hope School of Unicycling

Everyone should be fatuous for 15 minutes.
------------------------------------------------------------------------
Mikefule's Profile: http://www.unicyclist.com/profile/879
View this thread: http://www.unicyclist.com/thread/34657

Could the "tricycle" reference be to lollipop bearings?

--
digigal1 - You call this middle age??

Omni for Uni and Uni for Omni!
------------------------------------------------------------------------
digigal1's Profile: http://www.unicyclist.com/profile/5848
View this thread: http://www.unicyclist.com/thread/34657

digigal1 said:

*Could the "tricycle" reference be to lollipop bearings? *

I'm thinking that perhaps tricycle types have a one piece crank like the
OLD pieces of junk, whereas the bicycle types have 3 piece cranksets.

If you are on a very tight budget, the Sun unicycles are good enough to
learn on and very inexpensive. I'd try to at least get a Black Torker if
you can affaord it. I believe there are still some of last year's models
(with the rounded crown) available on ebay for less than $100

--
Krashin'Kenny - Crash Tested

If you ain't crashing, you ain't going fast enough!!!!!!!!!!!

------------------------------------------------------------------------
Krashin'Kenny's Profile: http://www.unicyclist.com/profile/3420
View this thread: http://www.unicyclist.com/thread/34657

get it frm rodger at : www.unicycle.com theyre always good quality and
reasonable prices.

laura [censored]

--
laura

"love makes the world go round? i think not, vodka makes it go faster!"
😄

"just how i like my martini, full of alcohol" - homer simpson
------------------------------------------------------------------------
laura's Profile: http://www.unicyclist.com/profile/6384
View this thread: http://www.unicyclist.com/thread/34657

This is the 2004 model of the Torker that I was referring to:

http://www.unicycle.com/shopping/shopexd.asp?id=675

It cost a little more than buying last year's model from ebay, but at
least you'll be buying from a VERY reputable dealer

--
Krashin'Kenny - Crash Tested

If you ain't crashing, you ain't going fast enough!!!!!!!!!!!

------------------------------------------------------------------------
Krashin'Kenny's Profile: http://www.unicyclist.com/profile/3420
View this thread: http://www.unicyclist.com/thread/34657

I just bought a Unistar LX 20 inch a few days ago and it has been
treating me good to learn on. Feels solid enough to me and I've dropped
it quite a few times. I expect it to last me a year or so then I'll get
a new one.

--
Gobd
------------------------------------------------------------------------
Gobd's Profile: http://www.unicyclist.com/profile/7590
View this thread: http://www.unicyclist.com/thread/34657

Thank you all for your input - this is really helpful.

Krashin'Kenny said:

*This is the 2004 model of the Torker that I was referring to:

http://www.unicycle.com/shopping/shopexd.asp?id=675

It cost a little more than buying last year's model from ebay, but at
least you'll be buying from a VERY reputable dealer *

That's the model I was looking at, actually. Is there a limit to how
much a rider can weigh? I'm rather on the heavy side, and I'd hate to
sink $100 into a unicycle only to break it.

--
Grim_Malady
------------------------------------------------------------------------
Grim_Malady's Profile: http://www.unicyclist.com/profile/7587
View this thread: http://www.unicyclist.com/thread/34657

Any basic 20 inch unicycle (or 24 inch) will take any normal weight of
adult for the purposes of learning and basic riding. If you were too
heavy for the unicycle, the exertion of riding would probably finish you
off! However, the strength of the unicycle does matter if you get into
more extreme riding, such as riding off road, doing stunts, hopping and
jumping, and so on.

Realistically, for every 10 people who buy unicycles, I bet there is
only 1 who goes on to do these things. This forum is not representative
of the unicycling world as a whole, in terms of the profile of the
members. Read here about 6 foot drops, 3 foot jumps, 100 mile rides,
and then notice that 90% of unicycles languish in sheds and garges,
having been ridden only a few times.

So, my advice remains that you should buy a decent mid range one.
Later, if you 're one of the lucky 10% who get into unicycling in a big
way, you may find that the strength of the unicycle becomes an issue -
but by then, you will be in a position to choose one which suits you.
Variables include wheel diameter, rim width, tyre section, spoke pattern
and gauge, crank type, hub type, seat post diameter... if you look at
the specification of the handbuilt Kris Holm 24 MUni at www.unicycle.com
you will get an idea of what is available at the high end of the
market.

But for now, buy, learn, enjoy, dream.

--
Mikefule - Roland Hope School of Unicycling

Everyone should be fatuous for 15 minutes.
------------------------------------------------------------------------
Mikefule's Profile: http://www.unicyclist.com/profile/879
View this thread: http://www.unicyclist.com/thread/34657

Krashin'Kenny said:

I'm thinking that perhaps tricycle types have a one piece crank like the
OLD pieces of junk, whereas the bicycle types have 3 piece cranksets.

That's what I was thinking too. A kid's tricycle usually has a single
piece of rod bent into something like a Z shape for the front wheel. A
bicycle on the other hand usually has a straight crank axle and two
separate cranks that are attached to it. If they call the former a
"tricycle style unicycle" then their advice is right. A unicycle with
this type of crank set cannot be serious.

Klaas Bil - Newsgroup Addict
--
I like the idea of not having to balance when out on a ride - joe

"Grim_Malady" <[email hidden]> wrote
in message
news:[email hidden]...

Quoted message said:

Thank you all for your input - this is really helpful.

Krashin'Kenny said:

*This is the 2004 model of the Torker that I was referring to:

http://www.unicycle.com/shopping/shopexd.asp?id=675

Search on ebay for "torker unicycle". There are 2004 models for under $100.
I just got my Torker LX last month off ebay and paid $70 plus shipping.

--
Steveyo