Mountain Bikes · Public discussion

Hydrapak bladders?

Started by Slacker · · Last activity · 15 posts · 1,547 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Mountain Bikes
Published
17 October 2004
Last activity
24 October 2004
Original author
Slacker
Posts
15
Discussion status
Public discussion
Total views
1,547
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–15 of 15
Posts remain in their original chronological order.

Text size
  1. Just tried today for the fist time. First impressions are not good. The
    bite valve is so sensitive that any pressure on it will make it [censored] like
    a 1 year old.

    Then at the end of the day, I noticed the bottom of my jersey was wet. I
    assumed the tube to bladder connection was leaking, but after looking at
    it closer, it looks like the water came right out of the top of the
    bladder. Yes, I closed it properly... A to A, B to B, and C to C then
    Velcro close.

    Anyone one have any experience with these bladders?

    --
    Slacker

  2. Sounds like you have a Blackburn hydrasack. Although they are good in the
    fact that they do not have a smell to the bag overall I was not happy with
    mine. I had a camalbak before it and I went back to the camalbak bladder,
    although it does have a weird taste to it due to the rubber I prefer it over
    the Blackburn. No leaks and the bite valve is great no leaks either. I
    found the blackburn bite valve to be too hard it isn't the soft rubber that
    camalbak makes.

    "Slacker" <[email hidden]> wrote in message
    news:opsfzyjczgm83lxu@slacker...
    Just tried today for the fist time. First impressions are not good. The
    bite valve is so sensitive that any pressure on it will make it [censored] like
    a 1 year old.

    Then at the end of the day, I noticed the bottom of my jersey was wet. I
    assumed the tube to bladder connection was leaking, but after looking at
    it closer, it looks like the water came right out of the top of the
    bladder. Yes, I closed it properly... A to A, B to B, and C to C then
    Velcro close.

    Anyone one have any experience with these bladders?

    --
    Slacker

  3. Try filling it not so full. It works on my
    Blackburn,Camelback,and Quest.

    I MTB 2004

  4. Quoted message said:

    Try filling it not so full. >

    It was only half full :-(

    --
    Slacker

  5. Slacker said:
    Quoted message said:

    Try filling it not so full. >

    It was only half full :-(

    Half empty!

    Tom

  6. On Sun, 17 Oct 2004 12:48:30 -0400, tcmedara <[email hidden]>

    Quoted message said:
    Slacker said:
    Quoted message said:

    Try filling it not so full. >

    It was only half full :-(

    Half empty!

    Tom

    Pessimist :-)

    --
    Slacker

  7. Slacker says:

    Quoted message said:

    Pessimist :-)

    You say that as though it were a bad thing... I'm an incurable pessimist, and
    am always having nice surprises. My wife is an optimist, and her surprises are
    always bad.
    Go figure!

    Steve

  8. Slacker <[email hidden]> wrote in message news:<opsfzyjczgm83lxu@slacker>...

    Quoted message said:

    Just tried today for the fist time. First impressions are not good. The
    bite valve is so sensitive that any pressure on it will make it [censored] like
    a 1 year old.
    Then at the end of the day, I noticed the bottom of my jersey was wet. I
    assumed the tube to bladder connection was leaking, but after looking at
    it closer, it looks like the water came right out of the top of the
    bladder. Yes, I closed it properly... A to A, B to B, and C to C


    then

    Quoted message said:


    Velcro close.

    Anyone one have any experience with these bladders?

    I've had one for about two years, and the bladder has worked well for
    me. Never had any problems with it leaking out the top, even when
    leaving it lying down. It hasn't developed any bad tastes, but I've
    never put anything other than water in it. I've fallen on it a few
    times and it didn't burst, but it did develop a leak on the bottom
    seam. I was able to heat-seal it by ironing it between two pieces of
    aluminum foil. I don't like the valve- I finally got used to it, but
    now it has a crack. Should be easy to replace with a better one.

  9. Slacker <[email hidden]> wrote in message

    Quoted message said:

    Anyone one have any experience with these bladders?

    Yup. I was given a hydrapak. Same experience. I believe I can't get
    more than 50oz into a 70oz sack prior to leakage. Also, the bite
    valve needs extreme care during transport (so do all bite valves).

  10. Slacker said:

    Just tried today for the fist time. First impressions are not good.
    The bite valve is so sensitive that any pressure on it will make it
    [censored] like a 1 year old.

    Then at the end of the day, I noticed the bottom of my jersey was
    wet. I assumed the tube to bladder connection was leaking, but after
    looking at it closer, it looks like the water came right out of the
    top of the bladder. Yes, I closed it properly... A to A, B to B, and
    C to C then Velcro close.

    Anyone one have any experience with these bladders?

    Never really had much of a problem with the bladder leaking unless I leave
    it on it's side, full, for long periods of time.
    The bite valve does leak easily. I replaced it with another brand valve -
    not sure what it was but it _wasnt_ a camelbak valve.
    --
    Westie
    (Replace 'invalid' with 'yahoo' when replying.)

  11. Slacker <[email hidden]> wrote in message news:<opsfzyjczgm83lxu@slacker>...

    Quoted message said:

    Just tried today for the fist time. First impressions are not good. The

    bite valve is so sensitive that any pressure on it will make it [censored] lik
    e

    a 1 year old.

    Then at the end of the day, I noticed the bottom of my jersey was wet. I

    assumed the tube to bladder connection was leaking, but after looking at

    it closer, it looks like the water came right out of the top of the

    bladder. Yes, I closed it properly... A to A, B to B, and C to C then

    Velcro close.

    Anyone one have any experience with these bladders?

    I had one a couple of yeasr ago. It was the roll top velcro closure,
    100 oz that i bought in australia.
    The bladder itself was made of some kind of nylon like mesh on one
    side, which amazingly wasn't actually waterproof, so the water sweated
    right through the side of the bladder and soaked the bag. then the
    zips all broke on the bag and i resigned to never buying another
    hydrapack product.

    cheers

    g

  12. Chris Phillipo said:

    In article <[email hidden]>, [email hidden]

    Quoted message said:
    Quoted message said:

    The bite valve is so sensitive that any pressure on it will make it
    [censored] like a 1 year old.

    Then at the end of the day, I noticed the bottom of my jersey was
    wet. I assumed the tube to bladder connection was leaking, but after
    looking at it closer, it looks like the water came right out of the
    top of the bladder. Yes, I closed it properly... A to A, B to B, and
    C to C then Velcro close.

    Anyone one have any experience with these bladders?


    Does it leak even when you have the valve shut off?

    Shut-off, what shut-off?

    Ended up just returning it. Time to try out a Dakine. If that leaks, then
    at least I'll be satisfied that there is no viable C-Bak replacement.
    --
    Slacker

  13. Slacker said:

    Ended up just returning it. Time to try out a Dakine. If that leaks, then
    at least I'll be satisfied that there is no viable C-Bak replacement.

    After having ridden my last ride drenched down the backside by yet another
    leaky camelbak bladder, I'm not sure they're all so viable either.

    --
    -BB-
    To reply to me, drop the attitude (from my e-mail address, at least)

  14. BB said:
    Slacker said:

    Ended up just returning it. Time to try out a Dakine. If that leaks,
    then
    at least I'll be satisfied that there is no viable C-Bak replacement.

    After having ridden my last ride drenched down the backside by yet
    another
    leaky camelbak bladder, I'm not sure they're all so viable either.


    Exactly why I'm trying to find a substitute :-(

    Dang C-bak, why don't they just bring back the old screw caps because the
    new ones *S U C K*!!!!

    --
    Slacker

  15. Chris Phillipo said:

    In article <opsgapz7h3m83lxu@slacker>, [email hidden] says...

    Quoted message said:

    Shut-off, what shut-off?

    Ended up just returning it. Time to try out a Dakine. If that leaks,
    the=
    n =

    at least I'll be satisfied that there is no viable C-Bak replacement.
    -- =

    Slacker

    There is a shut off on all Hydrapaks, if it had the old blue valve on it
    you twist the center, if it had the soft "chewable" valve then it had a
    push-pull valve. That's if it was a Hydrapak and not a Camelbak or
    something else.

    I'm not that familiar with their stuff, but it was the (too) EasyFloâ„¢ Bite
    Valve. Looks like they sell a shut-off valve separately according to
    http://www.hydrapak.com/accessories.html

    --
    Slacker

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·1 bot ·1 total

No signed-in users are active right now.

Applebot (1)