Ben <[email hidden]> wrote in message news:<[email hidden]>...
Quoted message said:I have a good friend who is having hip replacement surgery in November. He's been looking at bents
and is wondering how people with hip or knee replacement are doing on recumbents.
Any experience? I'll forward your comments to him.
Thanks, Ben
Quoted message said:Quoted message said:>>>Burley Canto>>>>>
I've been riding with replacement left hips since '77. I'm on the 3rd one, and their effect on
riding has been different each time. On this one the cup ended up rotated back a a few degrees past
where it should be. I'm no longer very comfortable with a closed riding position, so I can't get
down low enough to ride efficiently on a wedgie. As long as I have an open position I can ride all
day, or walk till my feet give out, without any hip discomfort.
As for balance with an open riding position; A backrest angle of 45 degrees and a 6" drop from seat
to BB works best for me. Even on our tandem with my seat ht. of 26-27" I reach the ground OK. and
have no balance problems. I'm 5' 10".
Some tips for him.
Suggest he trim his toenails very short before the surgery. It may be a while before he can reach
them comfortably again.
Learn to use crutches now, not in the hospital after you've been drugged and flat on your
back for days.
Explain to the doctor that much of your exercise will be biking, with the hip joint bent forward,
not straight. He may be willing to orient the socket a few degrees forward of straight up and down.
If they can accidentally rotate mine back a few degrees they should be able to intentionally rotate
yours forward.
Get all the exercise you can before the surgery. You will recover much faster. I rode my 1st century
a few weeks before my 1st hip replacement, with a cane on the rack so I could get around at the rest
stops. My 2nd one required neither cement nor waiting for bone to grow into a porous outer surface.
So I was biking to work 21 days after, with crutches across the handlebars of my Dunelt 3 speed.