Cycling Equipment · Public discussion

HID Recommendations for Commuting?

Started by David Murata · · Last activity · 23 posts · 2,004 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
10 October 2003
Last activity
26 November 2003
Original author
David Murata
Posts
23
Discussion status
Public discussion
Total views
2,004
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 21–23 of 23
Posts remain in their original chronological order.

Text size
  1. "David Murata" <[email hidden]> wrote in message news:_7vhb.727527$uu5.123779@sccrnsc04...

    Quoted message said:

    Does anybody have any recommendations for any of the HID lights for commuting?

    I'm not an expert on HID, but you should be sure to also get a good tail light (NOT an LED blinker).
    One of the Lightman strobes, or a 12 volt strobe wired to the HID battery.

    The primary advantage of HID is that it is more power efficient. You can buy sufficient halogen
    lights, but they will draw more power for the same light output. My commute is about 9 miles and 45
    minutes and I have found that two 14W sealed beam headlamps are more than enough, and I could
    increase these to 25W with no problem. One of the problems with the MR11 and MR16 based bicycle
    lights is that they look too much like bicycle lights to motorists. The sealed beams look more like
    motorcycle lights.

    Steve bicyclelighting.combicyclelighting.com

  2. Steven M. Scharf said:

    I'm not an expert on HID, but you should be sure to also get a good tail light (NOT an LED
    blinker). One of the Lightman strobes, or a 12 volt strobe wired to the HID battery.

    LEDs can be ok. I use this: niterider.combike taillight02.html

    It's connected to the same battery as the Niterider Blowtorch HID I have. It's pretty bright enough
    for sure, like a car's brake-light. Draws 1.1W blinking or 3W in continous mode.

    You can also use it on a separate 6V frame-mount battery.

  3. Jens Kr. Kirkebø <[email hidden]> wrote in message news:<[email hidden]>...

    Quoted message said:
    Steven M. Scharf said:

    I'm not an expert on HID, but you should be sure to also get a good tail light (NOT an LED
    blinker). One of the Lightman strobes, or a 12 volt strobe wired to the HID battery.

    LEDs can be ok. I use this: niterider.combike taillight02.html

    It's connected to the same battery as the Niterider Blowtorch HID I have. It's pretty bright
    enough for sure, like a car's brake-light. Draws 1.1W blinking or 3W in continous mode.

    You can also use it on a separate 6V frame-mount battery.

    Well, Niterider seems to be getting a big mention here, which is understandable. I'd just like to
    introduce the possibility of another manufacturer that perhaps people in America et al might not be
    quite so familiar with. Take a look at www.lupine.de and the Edison system if you want something
    that takes things to a new level. I have been using the 'Edison 10' for over one year now with zero
    problems and total 'respect' from the four wheel/multi-wheel driving community i have the misfortune
    to have to share the roads with over here in England. Highlights: Lithium-Ion smart battery with
    eight hour burn time on the 'lower' (a very relative term- it's still very bright) power setting,
    very nice handlebar mounted on/off switch with burn time indicator, and a truly inventive lamp
    on/off mounting design- so simple and clean with no screw-on mounting bracket nonsense. Sadly, i
    think that in America this light is going to be rather expensive when imported from the European
    Union (it's a German company), but the best is never going to be cheap, and this isn't. Probably
    about $1,000!! Start saving up now. Seriously though, i have a cycling friend who bought the
    Niterider Blowtorch and the cables corroded away after only one English winter. Umm, i guess that
    products made in sunny San Diego are just not designed with harsher climatic conditions in mind.
    Note that German winters are much worse than English winters so i doubt that i'll have any such
    problems with the Edison in this regard.

    Finally, i can say that at last there is a cycling product that you guys in America will have to pay
    an import premium on if you want the best. Normally we cyclists over in England feel the pain of
    having to buy your great cycling equipment with at least 30% added to the price that you would pay
    (Ti frames, Coombe pedals (really great design) et.c.). I would also recommend Ortlieb cycling bags
    (another German company) and Carnac shoes (a French company).

    Any recommendations on the 'best' rear light would be greatly appreciated.

    Best regards, Jason Wright.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.