I have work tommorow and have no lift so this is quite inportant
My rech mech arm , the two wheels that the chain pulls through is all
taken
Quoted message said:
apart , I can get the small wheels in with the chain in the middle , and then put the screw through but it dosent tighten up cause at the other
side
Quoted message said:
theres nothing that bolt on to so to say.
Can anyone give me a site that tells me how to put these on are give me advise on what im missing .
Thanks alot .
I'm guessing there's a long and a short bolt and you have them mixed up, or you have the wrong pulley at the top. -- _________________________ Chris Phillipo - Cape Breton, Nova Scotia http://www.ramsays-online.com
I have work tommorow and have no lift so this is quite inportant
My rech mech arm , the two wheels that the chain pulls through is all taken apart , I can get the small wheels in with the chain in the middle , and then put the screw through but it dosent tighten up cause at the other side theres nothing that bolt on to so to say.
Can anyone give me a site that tells me how to put these on are give me advise on what im missing .
On Thu, 29 Jul 2004 22:08:59 GMT, "HOY" <[email hidden]>
Quoted message said:
Ok , I got it all in but the cogs arent turning , I think this might be because I glued the washers that sit in either side of them because they kept falling out when i was trying to hold it in place and tighten it up. Was this wrong ?
Unfortunately yes, can you get the glue off? I'd go along with Chris and say you've got the pulley wheels and/or bolts mixed. The top pulley wheel should have a bit of side to side movement. When you're putting it back together do the top first, but only loose, then do the bottom, and finally tighten to the right torque, preferable with some thread lock
Quoted message said:
Thanks Chris for replying "Chris Phillipo" <[email hidden]> wrote in message news:[email hidden]...
Quoted message said:
In article <[email hidden]>, hoy.family123 @ntlworld.com says...
> then put the screw through but it dosent tighten up cause at the other side > theres nothing that bolt on to so to say. > > Can anyone give me a site that tells me how to put these on are give
me
Quoted message said:
Quoted message said:
> advise on what im missing . > > Thanks alot . > > >
I'm guessing there's a long and a short bolt and you have them mixed up, or you have the wrong pulley at the top. -- _________________________ Chris Phillipo - Cape Breton, Nova Scotia http://www.ramsays-online.com
Ok , I got it all in but the cogs arent turning , I think this might be because I glued the washers that sit in either side of them because they kept falling out when i was trying to hold it in place and tighten it up. Was this wrong ?
Thanks Chris for replying "Chris Phillipo" <[email hidden]> wrote in message news:[email hidden]...
Quoted message said:
In article <[email hidden]>, hoy.family123 @ntlworld.com says...
I have work tommorow and have no lift so this is quite inportant
My rech mech arm , the two wheels that the chain pulls through is all
taken
Quoted message said:
apart , I can get the small wheels in with the chain in the middle ,
and
Quoted message said:
Quoted message said:
Quoted message said:
then put the screw through but it dosent tighten up cause at the other
side
Quoted message said:
theres nothing that bolt on to so to say.
Can anyone give me a site that tells me how to put these on are give
me
Quoted message said:
Quoted message said:
Quoted message said:
advise on what im missing .
Thanks alot .
I'm guessing there's a long and a short bolt and you have them mixed up, or you have the wrong pulley at the top. -- _________________________ Chris Phillipo - Cape Breton, Nova Scotia http://www.ramsays-online.com
Does the big pulley go on the bottom and small on the top ? <[email hidden]> wrote in message news:[email hidden]...
Quoted message said:
On Thu, 29 Jul 2004 22:08:59 GMT, "HOY" <[email hidden]>
Quoted message said:
Ok , I got it all in but the cogs arent turning , I think this might be because I glued the washers that sit in either side of them because they kept falling out when i was trying to hold it in place and tighten it up. Was this wrong ?
Unfortunately yes, can you get the glue off? I'd go along with Chris and say you've got the pulley wheels and/or bolts mixed. The top pulley wheel should have a bit of side to side movement. When you're putting it back together do the top first, but only loose, then do the bottom, and finally tighten to the right torque, preferable with some thread lock
Quoted message said:
Thanks Chris for replying "Chris Phillipo" <[email hidden]> wrote in message news:[email hidden]...
On Sat, 31 Jul 2004 13:51:29 GMT, "HOY" <[email hidden]>
Quoted message said:
Does the big pulley go on the bottom and small on the top ? <[email hidden]> wrote in message news:[email hidden]...
Quoted message said:
On Thu, 29 Jul 2004 22:08:59 GMT, "HOY" <[email hidden]>
Quoted message said:
Ok , I got it all in but the cogs arent turning , I think this might be because I glued the washers that sit in either side of them because they kept falling out when i was trying to hold it in place and tighten it up. Was this wrong ?
Unfortunately yes, can you get the glue off? I'd go along with Chris and say you've got the pulley wheels and/or bolts mixed.
_The top pulley wheel should have a bit of side to side movement._
When you're putting it back together do the top first, but
Quoted message said:
Quoted message said:
only loose, then do the bottom, and finally tighten to the right torque, preferable with some thread lock
Quoted message said:
Thanks Chris for replying "Chris Phillipo" <[email hidden]> wrote in message news:[email hidden]... > In article <[email hidden]>, hoy.family123 > @ntlworld.com says... > > This for anyone who is unsure. > > > > http://www.utahmountainbiking.com/fix/pics/rshift02.jpg > > http://www.utahmountainbiking.com/fix/pics/rshift07.jpg > > "HOY" <[email hidden]> wrote in message > > news:[email hidden]... > > > Hi > > > > > > I have work tommorow and have no lift so this is quite inportant > > > > > > My rech mech arm , the two wheels that the chain pulls through is
all
Quoted message said:
Quoted message said:
> > taken > > > apart , I can get the small wheels in with the chain in the middle
,
Quoted message said:
Quoted message said:
and > > > then put the screw through but it dosent tighten up cause at the
other
Quoted message said:
Quoted message said:
> > side > > > theres nothing that bolt on to so to say. > > > > > > Can anyone give me a site that tells me how to put these on are
give
Quoted message said:
Quoted message said:
me > > > advise on what im missing . > > > > > > Thanks alot . > > > > > > > > > > > > > > > > > I'm guessing there's a long and a short bolt and you have them mixed
up,
Quoted message said:
Quoted message said:
> or you have the wrong pulley at the top. > -- > _________________________ > Chris Phillipo - Cape Breton, Nova Scotia > http://www.ramsays-online.com
