Handlebar creak

"Mark Enderby" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

I have alloy handlebars which creak under stress. I've tightened the stem bolts as far as I dare.
Is this just something you put up with ?

--
Cheers, Mark Enderby

Might be worth just replacing them if they're not expensive ones. A creak could be a crack or
weakness. Take a close look at the bar for scratches and/or cracks, especially around the stem area.
Believe me, you don't want your bars to break when you're on the road.

Mark Enderby said:

I have alloy handlebars which creak under stress. I've tightened the stem bolts as far as I dare.
Is this just something you put up with ?

I put up with that right up to the moment when the bars snapped...

Guy
===
** WARNING ** This posting may contain traces of irony. chapmancentral.comchapmancentral.comOpen ↗ (BT ADSL and
dynamic DNS permitting)
NOTE: BT Openworld have now blocked port 25 (without notice), so old mail addresses may no longer
work. Apologies.

"Mark Enderby" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

I have alloy handlebars which creak under stress. I've tightened the stem bolts as far as I dare.
Is this just something you put up with ?

More often than not, the creak is just some crud stuck between the stem and bar.

Strip it down, clean it thoroughly and put a smear of grease on the mating surfaces before
reassemling.

--
Adam Dugmore

Kona Explosif Honda CB500R - easier uphill

Just zis Guy, you know? <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Mark Enderby said:

I have alloy handlebars which creak under stress. I've tightened the stem bolts as far as I dare.
Is this just something you put up with ?

Remove bars, clean and retry.

Remove bars, lightly grease and retry.

Remove bars, refit and retry.

Any other combination you can think of

It doesn't necessarily mean there is a problem with your bars, but it could
do. My bars never creaked until I fitted a new stem, then they did. I went through some of the am.
procedures and now I'm quiet.

--
Mark
____________________________
Practice does not make perfect... Perfect practice makes perfect

---
Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (grisoft.comgrisoft.comOpen ↗).
Version: 6.0.476 / Virus Database: 273 - Release Date: 24/04/03

I forgot to say that this is a new bike. I checked the bolts with the dealer yesterday but it still
does it. There's no sign of damage/fractures or dirt

--
Cheers, Mark Enderby

"Adam Dugmore" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

"Mark Enderby" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

I have alloy handlebars which creak under stress. I've tightened the

stem

Quoted message said:

Quoted message said:

bolts as far as I dare. Is this just something you put up with ?

More often than not, the creak is just some crud stuck between the stem

and

Quoted message said:

bar.

Strip it down, clean it thoroughly and put a smear of grease on the mating surfaces before
reassemling.

--
Adam Dugmore

Kona Explosif Honda CB500R - easier uphill

Mark Enderby <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

I forgot to say that this is a new bike. I checked the bolts with the

dealer

Quoted message said:

yesterday but it still does it. There's no sign of damage/fractures or

dirt

Still remove it and clean it, remove it and grease it...<fade to end>. You'll be surprised.

--
Mark
____________________________
Practice does not make perfect... Perfect practice makes perfect

---
Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (grisoft.comgrisoft.comOpen ↗).
Version: 6.0.476 / Virus Database: 273 - Release Date: 24/04/03

MSA said:

Mark Enderby <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

I forgot to say that this is a new bike. I checked the bolts with the

dealer

Quoted message said:

yesterday but it still does it. There's no sign of damage/fractures or

dirt

Still remove it and clean it, remove it and grease it...<fade to end>. You'll be surprised.

One other thing to check might be the brake levers, if they are drop bar types secured by a
jubilee-clip type thing. One of mine became a little loose and would squeak a bit if I rode hard up
hills while holding onto the hoods.

Regards,

-david

... and it worked !

--
Cheers, Mark Enderby

"MSA" <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

Mark Enderby <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

I forgot to say that this is a new bike. I checked the bolts with the

dealer

Quoted message said:

yesterday but it still does it. There's no sign of damage/fractures or

dirt

Still remove it and clean it, remove it and grease it...<fade to end>. You'll be surprised.

--
Mark
____________________________
Practice does not make perfect... Perfect practice makes perfect

---
Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (grisoft.comgrisoft.comOpen ↗).
Version: 6.0.476 / Virus Database: 273 - Release Date: 24/04/03

Mark Enderby <[email hidden]> wrote in message "]news:[email hidden]...

Quoted message said:

... and it worked !

--
Cheers, Mark Enderby

Excellent...enjoy your creak-free riding!

Mark
____________________________
Practice does not make perfect... Perfect practice makes perfect

---
Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (grisoft.comgrisoft.comOpen ↗).
Version: 6.0.476 / Virus Database: 273 - Release Date: 24/04/03