Australia and New Zealand · Public discussion

Halogen globes

Started by Duncan · · Last activity · 7 posts · 521 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Australia and New Zealand
Published
25 July 2004
Last activity
28 July 2004
Original author
Duncan
Posts
7
Discussion status
Public discussion
Total views
521
Views / 30 days
0
Topics

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–7 of 7
Posts remain in their original chronological order.

Text size
  1. Hi,
    I'm after globes for my lighting system. I had a look in Jaycar and
    Bunnings, they had several globes but not the right size or voltage. The
    LBS had globes but not the right wattage and very overpriced.
    I'm mainly after a 10 watt globe (NR-10) but I'm interested in experimenting
    with a few other wattages for different applications.
    Anybody found a shop with a good range?
    Cheers,
    Duncan.

  2. "Duncan" <[email hidden]> wrote in news:[email hidden]:

    Quoted message said:

    Anybody found a shop with a good range?

    There's bound to be a local light shop near you full of fancy lamp shades,
    stands etc. I popped into mine and the guy had a much greater range than
    either Bunnings or Jaycar (or even the two combined).

    Graeme

  3. Duncan said:

    I'm after globes for my lighting system. I had a look in Jaycar and
    Bunnings, they had several globes but not the right size or voltage. The
    LBS had globes but not the right wattage and very overpriced.
    I'm mainly after a 10 watt globe (NR-10) but I'm interested in experimenting
    with a few other wattages for different applications.
    Anybody found a shop with a good range?

    I've found Jaycar halogens iffy. Would be worthwhile to test them in the
    shop before purchase. I've had a few that glow orange rather than white, and
    last about half an hour. Needless to say I've long since not bought any from
    Jaycar.

    I bought a 12W 12 degree beam downlight from my local home lighting store, I
    imagine you should be able to get something similar in your neck of the woods.
    I've found this best overall for general night paved suburban path riding.

    Might not help if you have many tight corners though.
    For that, I've used two 4w (each) cateye bike lights, each splayed apart and
    upwards. They took care of lighting when turning corners. My forward facing
    6W light (what i was using at the time) took care of the longer distance work.

    However, one helment mounted light would probably be better for this purpose
    if you don't mind the cables.

    If you're off-roading, you need something with more horsepower, and width. I
    used a 20W 36 degree downlight on the bike, along with a "normal" 6W bike light
    on my helmet.
    The 20watter took care of my peripheral vision, while the helmet mounted
    light was used for more directional obeservations.

    --
    Linux Registered User # 302622 <http://counter.li.org>

  4. You'll have to get them from overseas. There are several outlets in UK where
    10 W/6 V globes are available with various beam angles.

    I got three shipped out in a week or so from one of these (since lost URL)

    Bob C
    "Duncan" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    Hi,
    I'm after globes for my lighting system. I had a look in Jaycar and
    Bunnings, they had several globes but not the right size or voltage. The
    LBS had globes but not the right wattage and very overpriced.
    I'm mainly after a 10 watt globe (NR-10) but I'm interested in


    experimenting

    Quoted message said:

    with a few other wattages for different applications.
    Anybody found a shop with a good range?
    Cheers,
    Duncan.

  5. Duncan said:

    Hi,
    I'm after globes for my lighting system. I had a look in Jaycar and
    Bunnings, they had several globes but not the right size or voltage. The

    Check the yellow pages under 'lamp' .
    There are a few specialist places. They can order in if needed.

    Quoted message said:

    I'm mainly after a 10 watt globe (NR-10) but I'm interested in experimenting

    Quality/efficiency of these lamps vary enormously. Hopefully they can
    advise you which are best.

    For bikes, its often best to use a higher voltage than spec'd,
    increasing efficiency, but reducing life.

  6. Bob Chambers said:

    You'll have to get them from overseas. There are several outlets in UK where
    10 W/6 V globes are available with various beam angles.

    For the beam angle reference, I assume you mean MR-11 halogens with
    dichroic reflector? I had no trouble getting them for specialist lamp
    shops (not lighting - just bulbs) in Perth.

    http://www.yellowpages.com.au/search/performSearch.do?headingCode=33383&location=10053&businessType=lamps

    Quoted message said:
    Quoted message said:

    I'm mainly after a 10 watt globe (NR-10) but I'm interested in

    Whats an NR-10 ? Does not google.

  7. "Mike" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:
    Bob Chambers said:

    You'll have to get them from overseas. There are several outlets in UK


    where

    Quoted message said:
    Quoted message said:

    10 W/6 V globes are available with various beam angles.

    For the beam angle reference, I assume you mean MR-11 halogens with
    dichroic reflector? I had no trouble getting them for specialist lamp
    shops (not lighting - just bulbs) in Perth.

    I had a ring around several lighting shops today I finaly found Beacon
    lighting in St Kilda that had a huge range but even they hadn't heard of
    NR10 or NR15 globes. Seems like they are foreign or outdated codes.
    It seems MR11 is the equivalent.
    Still have a slight problem, even after the woman at Beacon rang several
    suppliers the only wattages she could get were 5,20 and 35.
    I have been running a 10 watt (which blew) which I use for commuting and
    racing it gets about 1.5 hours burn time.
    I have another 15 watt globe but I'm worried it won't last a whole race plus
    a warm up lap (potentialy up to an hour).
    Idealy I'm after another 10 watt but I think a 12 would be a good
    compromise.

    The LBS has 12 watt bulbs for $35 which seems excessive for a $15 bulb. The
    racing seems to take it's toll on the lights (one section runs between
    railway tracks so I may need a few of them and it'd be nice to have a cheap
    supply.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.