Cycling Equipment · Public discussion

Front deraileur question

Started by Leo Lichtman · · Last activity · 10 posts · 464 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
11 July 2005
Last activity
12 July 2005
Original author
Leo Lichtman
Posts
10
Discussion status
Public discussion
Total views
464
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–10 of 10
Posts remain in their original chronological order.

Text size
  1. I have just added another chainring to my Dahon folding bike, so I have 12
    speeds. In order to shift, I stop, reach down, and do it by hand, which is
    not too bad, since I don't have to do it very often. But I would eventually
    like to add a deraileur. Is there one available that is operated by a lever
    on the der itself, so I could just reach down with my right hand and do the
    shift?

  2. On Mon, 11 Jul 2005 02:04:21 GMT, "Leo Lichtman" <[email hidden]>

    Quoted message said:

    I have just added another chainring to my Dahon folding bike, so I have 12
    speeds. In order to shift, I stop, reach down, and do it by hand, which is
    not too bad, since I don't have to do it very often. But I would eventually
    like to add a deraileur. Is there one available that is operated by a lever
    on the der itself, so I could just reach down with my right hand and do the
    shift?

    Learn to downshift with your heel and upshift by hand while rolling?

    Sorry, don't have a real answer for you.

    Ron

  3. Leo Lichtman said:

    I have just added another chainring to my Dahon folding bike, so I have 12
    speeds. In order to shift, I stop, reach down, and do it by hand, which is
    not too bad, since I don't have to do it very often. But I would eventually
    like to add a deraileur. Is there one available that is operated by a lever
    on the der itself, so I could just reach down with my right hand and do the
    shift?

    This is how some of the first front derailleurs were operated, as seen
    on this Hercules:
    http://rydjor.com/bikecollection/1954her.htm

    You may be able to salvage one off an ancient Schwinn Varsity (they
    were built this way in the early '60's), but cognoscenti will vilify
    you for destroying such a rare and valuable bike.

    I say go for it.

    Jeff

  4. "JeffWills" wrote: (clip) You may be able to salvage one off an ancient
    Schwinn Varsity (clip)
    ^^^^^^^^^^^^^^^^
    I would have to find one first, which seems like a long shot. I don't think
    I could bring myself to strip one off a usable bike. But, after seeing the
    excellent closeup in your link, I think I could make one. Thanks.

  5. "RonSonic" wrote: Learn to downshift with your heel
    ^^^^^^^^^^^^^^^
    I've been told that is possible, but I can't figure out how I'm going to
    pedal with my left foot with platform pedals. (The Dahon uses folding
    pedals that I don't want to change.)
    ^^^^^^^^^^^^^
    and upshift by hand while rolling?
    ^^^^^^^^^^^^^
    I know I'm not coordinated enough to do that.

  6. Leo Lichtman said:

    I have just added another chainring to my Dahon folding bike, so I
    have 12 speeds. In order to shift, I stop, reach down, and do it by
    hand, which is not too bad, since I don't have to do it very often. But I
    would eventually like to add a deraileur. Is there one
    available that is operated by a lever on the der itself, so I could
    just reach down with my right hand and do the shift?

    Popsicle stick?

  7. Leo Lichtman said:

    I have just added another chainring to my Dahon folding bike, so I have 12
    speeds. In order to shift, I stop, reach down, and do it by hand, which is
    not too bad, since I don't have to do it very often. But I would eventually
    like to add a deraileur. Is there one available that is operated by a lever
    on the der itself, so I could just reach down with my right hand and do the
    shift?

    These used to exist, but have been extinct since the late 1950s. Even
    if you found one, it is likely that it wouldn't fit the seat tube of
    your Dahon.

    However, you could get a "top pull" front derailer and mount a shift
    lever on your seat tube. Depending on the diameter of your seat tube
    you might need to do a bit of fiddling to mount the shift lever, but
    that would be the hardest part of the conversion.

    Sheldon "Schlumpf?" Brown
    +---------------------------------------------+
    | I give myself sometimes admirable advice, |
    | but I am incapable of taking it. |
    | --Lady Mary Wortley Montagu |
    +---------------------------------------------+
    Harris Cyclery, West Newton, Massachusetts
    Phone 617-244-9772 FAX 617-244-1041
    http://harriscyclery.com
    Hard-to-find parts shipped Worldwide
    http://captainbike.com http://sheldonbrown.com

  8. Sheldon Brown said:

    However, you could get a "top pull" front derailer and mount a shift
    lever on your seat tube. Depending on the diameter of your seat tube
    you might need to do a bit of fiddling to mount the shift lever, but
    that would be the hardest part of the conversion.

    http://www.bikespecialties.com/marip_petite.html Put your mouse
    pointer over the seat cluster on this picture and it will show a small
    picture of a downtube shift lever which engages a bottom bracket
    generator. This may be similar to what Mr. Brown is referring to.

  9. Leo Lichtman said:

    I have just added another chainring to my Dahon folding bike, so I have 12
    speeds. In order to shift, I stop, reach down, and do it by hand, which is
    not too bad, since I don't have to do it very often. But I would eventually
    like to add a deraileur. Is there one available that is operated by a lever
    on the der itself, so I could just reach down with my right hand and do the
    shift?

    They were once common but now not 'production'. See a copy
    of the Japanese 'New Cycling' magazine for both vintage and
    modern lever-action front changers. Can't be all that
    difficult to fabricate, given the number which appear in
    that magazine.

    Or find 'The Data Book' for good ideas to copy.
    --
    Andrew Muzi
    www.yellowjersey.org
    Open every day since 1 April, 1971

  10. Salad tongs. I use them myself.

    Hang from bar end if you're going to be shifting a lot, or
    weave through a brake cable if not.

    --
    Ron Hardin
    [email hidden]

    On the internet, nobody knows you're a jerk.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.