Cycling Equipment · Public discussion

Fizik Arione saddle

Started by JBIthaca · · Last activity · 6 posts · 751 views

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
23 March 2006
Last activity
24 March 2006
Original author
JBIthaca
Posts
6
Discussion status
Public discussion
Total views
751
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–6 of 6
Posts remain in their original chronological order.

Text size
  1. Any of you that have this saddle, are there any tips on setting it up?
    Level front to back, nose up, nose down? Also due to length of rails,
    should the front tip of the saddle be set the same as my old saddle
    distance from the bottom bracket?

    Thanks

  2. JBIthaca said:

    Any of you that have this saddle, are there any tips on setting it up?
    Level front to back, nose up, nose down?

    Start with level front and back and see if this workes out for you.

    Also due to length of rails,

    Quoted message said:

    should the front tip of the saddle be set the same as my old saddle
    distance from the bottom bracket?

    Unlikely if the old saddle has a different shap. Your sitbones rest on
    the back of the saddle not on the nose, and your sitbones should be on
    the same position relative to the bottombracket.

    Lou
    --
    Posted by news://news.nb.nu

  3. JBIthaca said:

    Any of you that have this saddle, are there any tips on setting it up?
    Level front to back, nose up, nose down?

    I'm using this saddle for two years and I admit it was tricky to set up
    at the beginning. My experience is that the front part (about 2/3 of the
    length) should be level (very slightly up in my case), the rear end goes
    a bit up.
    Once I found the correct position and I did some hours, it has been the
    best saddle I ever had. Very subjective, I know.

    Francesco

    Quoted message said:

    Also due to length of rails,
    should the front tip of the saddle be set the same as my old saddle
    distance from the bottom bracket?

    Thanks

  4. Hello,

    As as starting point I'd set it perfectly level and put the the tip of
    the saddle about 10 mm further forward than your old saddle. That way
    you will get the part you sit on around the same point. Mine is
    currently 12mm further forward than my old saddle, but I may have moved
    my position forward slightly.

    My saddle is level or the nose is SLIGHTLY down. I lowered the nose a
    bit to take the pressure off when I'm on the drops, sitting upright it
    was comfortable with the nose a little higher. Take an allen wrench
    with you on your first few rides....

    -Eric

    Francesco Devittori said:
    JBIthaca said:

    Any of you that have this saddle, are there any tips on setting it up?
    Level front to back, nose up, nose down?

    I'm using this saddle for two years and I admit it was tricky to set up
    at the beginning. My experience is that the front part (about 2/3 of the
    length) should be level (very slightly up in my case), the rear end goes
    a bit up.
    Once I found the correct position and I did some hours, it has been the
    best saddle I ever had. Very subjective, I know.

    Francesco

    Quoted message said:

    Also due to length of rails,
    should the front tip of the saddle be set the same as my old saddle
    distance from the bottom bracket?

    Thanks


  5. E Goforth said:

    Hello,

    As as starting point I'd set it perfectly level and put the the tip of
    the saddle about 10 mm further forward than your old saddle. That way
    you will get the part you sit on around the same point. Mine is
    currently 12mm further forward than my old saddle, but I may have moved
    my position forward slightly.

    -Eric

    Francesco Devittori said:
    JBIthaca said:

    Any of you that have this saddle, are there any tips on setting it up?
    Level front to back, nose up, nose down?

    I'm using this saddle for two years and I admit it was tricky to set up
    at the beginning. My experience is that the front part (about 2/3 of the
    length) should be level (very slightly up in my case), the rear end goes
    a bit up.

    Gosh, I just threw mine on so it looked about right and haven't
    touched it since. Am I missing out on something by not being able to
    detect 2mm of fore/aft movement? I doubt it; my torso length varies
    more than that from morning to evening.

    Kinky Cowboy*

    *Batteries not included
    May contain traces of nuts
    Your milage may vary

  6. "JBIthaca" <[email hidden]> wrote in news:1143141707.644673.248770
    @t31g2000cwb.googlegroups.com:

    Quoted message said:

    Any of you that have this saddle, are there any tips on setting it up?
    Level front to back, nose up, nose down? Also due to length of rails,
    should the front tip of the saddle be set the same as my old saddle
    distance from the bottom bracket?

    Level the front half of the saddle; back will stick up a little.
    You'll be sitting on the back half of the saddle most of the time; align that
    with where you sat on the old saddle.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.