Dura ace crankset/bb with Chorus drivetrain?

ex99125b-<< can you put a Dura Ace bb/crankset on a bike running a Chorus
drivetrain? Do the outgoard bearings change the chainline significantly?

Quoted message said:

Quoted message said:

<BR><BR>

Nope, not hardly at all. ERGO is completely compatible with this and just about
every other crank/BB/front der combo.

If ya got to have larger bearings and ya gotta have a thinner BB spindle, I
think the 'headset' style of BB, now offered by shimano, FSA, and others is a
good idea BUT

Still nuthin wrong with a square taper in terms of long life, stiffness,
bearing size, etc, if installed and maintained correctly.

Peter Chisholm
Vecchio's Bicicletteria
1833 Pearl St.
Boulder, CO, 80302
(303)440-3535
http://www.vecchios.com
"Ruote convenzionali costruite eccezionalmente bene"

Once again, thanks peter

Qui si parla Campagnolo said:

ex99125b-<< can you put a Dura Ace bb/crankset on a bike running a Chorus
drivetrain? Do the outgoard bearings change the chainline significantly?

Quoted message said:

Quoted message said:

<BR><BR>

Nope, not hardly at all. ERGO is completely compatible with this and just about
every other crank/BB/front der combo.

If ya got to have larger bearings and ya gotta have a thinner BB spindle, I
think the 'headset' style of BB, now offered by shimano, FSA, and others is a
good idea BUT

Still nuthin wrong with a square taper in terms of long life, stiffness,
bearing size, etc, if installed and maintained correctly.

Peter Chisholm
Vecchio's Bicicletteria
1833 Pearl St.
Boulder, CO, 80302
(303)440-3535
http://www.vecchios.com
"Ruote convenzionali costruite eccezionalmente bene"