does anyone have this BC?

i have the same one but in red. Not too sure if it's good or not since i
actually can't ride well but from what i've seen on uni movies, the
really good people have longer pedals so it might be worth the
investment to get longer pedals.

I hope that price is american because i got mine at bedford unicycles
for 150$ hmmm...😕

--
Mr. Dawson

blaaaah.ughhhh.>🙁 ):>( blegh
------------------------------------------------------------------------
Mr. Dawson's Profile: http://www.unicyclist.com/profile/11478
View this thread: http://www.unicyclist.com/thread/48527

I've had it since Wednesday. It's pretty nice, but once you get it take
it to a skate shop for grip tape.

--
koebwil

"I used to eat erasers in grade school...." James_Potter
'come to my gallery.' (http://tinyurl.com/qssag)
------------------------------------------------------------------------
koebwil's Profile: http://www.unicyclist.com/profile/11308
View this thread: http://www.unicyclist.com/thread/48527

Mr. Dawson said:

I hope that price is american because i got mine at bedford unicycles
for 150$ hmmm...😕

I got my first one from Bedford for $150 also and from what I have
heard, the bedford plates are stronger so the price difference is worth
it. I can't prove that bedfords are alot stronger because I have never
ridden on the yuni plates but I have heard that some people have bent
them.
Personally I like the long plates ALOT more.

--
litldude2

Gallery.unicyclist.com/spencer
Litldude2 (att) aol (dott) com
MR 'Reply 60,000' (http://tinyurl.com/qbhsa) 'Page 4000'
(http://tinyurl.com/lyfj4)

James_Potter said:

I think we could just apply the same cure we use for bread, to humans.
just scrape off the cancer with a butter knife, then put jelly on it,
and eat it...mmmmmm

------------------------------------------------------------------------
litldude2's Profile: http://www.unicyclist.com/profile/6134
View this thread: http://www.unicyclist.com/thread/48527

I have had it for a little while and I like it. It's fun to get pulled
by a bike😎

--
xeaza

My Web site.
www.wrightsanson.com/taylor
😎 😄 😎
------------------------------------------------------------------------
xeaza's Profile: http://www.unicyclist.com/profile/10500
View this thread: http://www.unicyclist.com/thread/48527

was the difference between the PRO BEDFORD plates and the bedford
plates??
and are bc wheels hard to learn???

--
irvinegr

Check out my SWEET movies!!! http://tinyurl.com/cr7fu
------------------------------------------------------------------------
irvinegr's Profile: http://www.unicyclist.com/profile/10958
View this thread: http://www.unicyclist.com/thread/48527

The normal Bedford plates are the short ones and the PRO plates are the
long ones.

--
litldude2

Gallery.unicyclist.com/spencer
Litldude2 (att) aol (dott) com
MR 'Reply 60,000' (http://tinyurl.com/qbhsa) 'Page 4000'
(http://tinyurl.com/lyfj4)

James_Potter said:

I think we could just apply the same cure we use for bread, to humans.
just scrape off the cancer with a butter knife, then put jelly on it,
and eat it...mmmmmm

------------------------------------------------------------------------
litldude2's Profile: http://www.unicyclist.com/profile/6134
View this thread: http://www.unicyclist.com/thread/48527

ok would the PRO plates fit on a normal 20" wheel?? or would it be
better to get the Whole set with the wheel??

--
irvinegr

Check out my SWEET movies!!! http://tinyurl.com/cr7fu
------------------------------------------------------------------------
irvinegr's Profile: http://www.unicyclist.com/profile/10958
View this thread: http://www.unicyclist.com/thread/48527

Is it difficult to ride a BC wheel?

--
Job

'My Unicycle Gallery' (http://tinyurl.com/ndro5)
------------------------------------------------------------------------
Job's Profile: http://www.unicyclist.com/profile/11945
View this thread: http://www.unicyclist.com/thread/48527

Job said:

Is it difficult to ride a BC wheel?

no...

--
kapoute

Sorry, I don't speak english !

Julien Renaud
------------------------------------------------------------------------
kapoute's Profile: http://www.unicyclist.com/profile/8060
View this thread: http://www.unicyclist.com/thread/48527

ok, If I get a bc, which probably isn't that likely intul my B-Day in
like 4 months ill probubley get the Bedford

Miles

--
mornish

"LX seats are as comfortable as bricks." lildude2
"CX seats are bricks."
------------------------------------------------------------------------
mornish's Profile: http://www.unicyclist.com/profile/11658
View this thread: http://www.unicyclist.com/thread/48527

irvinegr said:

ok would the PRO plates fit on a normal 20" wheel?? or would it be
better to get the Whole set with the wheel??

They would fit on any wheel with a 14mm axle.

--
litldude2

Gallery.unicyclist.com/spencer
Litldude2 (att) aol (dott) com
MR 'Reply 60,000' (http://tinyurl.com/qbhsa) 'Page 4000'
(http://tinyurl.com/lyfj4)

James_Potter said:

I think we could just apply the same cure we use for bread, to humans.
just scrape off the cancer with a butter knife, then put jelly on it,
and eat it...mmmmmm

------------------------------------------------------------------------
litldude2's Profile: http://www.unicyclist.com/profile/6134
View this thread: http://www.unicyclist.com/thread/48527

ok... is that the same as most BMX bike wheels??

--
irvinegr

Check out my SWEET movies!!! http://tinyurl.com/cr7fu
------------------------------------------------------------------------
irvinegr's Profile: http://www.unicyclist.com/profile/10958
View this thread: http://www.unicyclist.com/thread/48527

irvinegr said:

ok... is that the same as most BMX bike wheels??

Yes, the good ones. Most of the cheesy ones have 10mm axles, though.
You can pick up a 20" rim with a 14mm hub at your LBS for around
$40-$50.

--
Spudman

*| B B|* This space owned by Fly '😎'
(http://www.unicyclist.com/forums/showthread.php?t=27264)
*| I O |* This space owned by Frees*TYLER!*
*| L A |* *MERCYME owns this space!!!* . . . . . . . . .*X*
<--Chosen's spot
*| L R |* This space owned by unijesse
*|__'-' (www.selectric.org)____'D'
(http://www.cathodecorner.com/nixiewatch/index.html)___|* This space
rendered by forrest. . . . . A spot for Evan Byrne--> *X*
------------------------------------------------------------------------
Spudman's Profile: http://www.unicyclist.com/profile/10752
View this thread: http://www.unicyclist.com/thread/48527

would thoes 40-50$ wheels be better than the wheel that come with the
bedford PRO BC for $175??

--
irvinegr

Check out my SWEET movies!!! http://tinyurl.com/cr7fu
------------------------------------------------------------------------
irvinegr's Profile: http://www.unicyclist.com/profile/10958
View this thread: http://www.unicyclist.com/thread/48527

No, the $40-$50 ones are the cheaper versions. You can get nice
expensive ones, but I always find that cheap stuff works just fine as
long as you are careful.

--
Spudman

*| B B|* This space owned by Fly '😎'
(http://www.unicyclist.com/forums/showthread.php?t=27264)
*| I O |* This space owned by Frees*TYLER!*
*| L A |* *MERCYME owns this space!!!* . . . . . . . . .*X*
<--Chosen's spot
*| L R |* This space owned by unijesse
*|__'-' (www.selectric.org)____'D'
(http://www.cathodecorner.com/nixiewatch/index.html)___|* This space
rendered by forrest. . . . . A spot for Evan Byrne--> *X*
------------------------------------------------------------------------
Spudman's Profile: http://www.unicyclist.com/profile/10752
View this thread: http://www.unicyclist.com/thread/48527