diy chain whip

davek said:

Has anyone got any experience of making their own chain
whip by nailing a length of old chain to a piece of wood?
Does it work? I think I'll try it anyway - it won't cause
any damage to my lovely new cassette, right?

I don't have direct experience but a mate in Oxford had a
home made chain whip. I think he used a metal haft and he
rivetted the chain on.

Colin

On Tue, 6 Jul 2004 11:30:19 +0000 (UTC), in
<[email hidden]>, "davek"

Quoted message said:

Has anyone got any experience of making their own chain
whip by nailing a length of old chain to a piece of wood?
Does it work? I think I'll try it anyway - it won't cause
any damage to my lovely new cassette, right?

An oil filter wrench from Poundland might be easier

--
DISCLAIMER: My email box is private property.Email which
appears in my inbox is mine to do what I like with. Anything
which is sent to me (whether intended or not) may, if I so
desire, form a legal and binding contract.

davek said:

Has anyone got any experience of making their own chain
whip by nailing a length of old chain to a piece of wood?
Does it work? I think I'll try it anyway - it won't cause
any damage to my lovely new cassette, right?

Cyclestore.co.uk have a chain whip for a shade over six
quid. I'd be inclined to take the view that the risk of
damage to cassette and fingers, to say nothing of the
required time to molish the thing, made that quite an
attractive deal :-)

--
Guy
--
May contain traces of irony. Contents liable to settle after
posting. chapmancentral.co.ukchapmancentral.co.ukOpen ↗

I tried using an oil filter wrench but found that the
width of the chain was too big to fit snuggly on my 9
speed casette.

Neil Hardman said:

I tried using an oil filter wrench but found that the
width of the chain was too big to fit snuggly on my 9
speed casette.

But presumably it's perfect for a track bike with a 1/8"
sprocket, where the usual 3/32" chain whip doesn't fit?

"davek" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Has anyone got any experience of making their own chain
whip by nailing a length of old chain to a piece of wood?
Does it work? I think I'll try it anyway - it won't cause
any damage to my lovely new cassette, right?

Use a piece of steel bar the same width as the chain. Attach
a long piece of chain with one bolt for wrapping around
sprockets and a short length of chain just above it with 2
bolts. We used to make 'em as teenagers and a few years ago
I made my current one as an Old Git 'cos I'm a tight wad.

Pete

Make one with a cycling theme, just cut the last 8 to 10
inches off a pair of old bike forks. Rivet the end of an old
piece of chain to the mudgaurd eye and bingo!

"

On Tue, 6 Jul 2004 17:45:12 +0100, in
<[email hidden]>, "Neil Hardman"

Quoted message said:

I tried using an oil filter wrench but found that the
width of the chain was too big to fit snuggly on my 9
speed casette.

Seven-speed rules :-)

--
DISCLAIMER: My email box is private property.Email which
appears in my inbox is mine to do what I like with. Anything
which is sent to me (whether intended or not) may, if I so
desire, form a legal and binding contract.

Zog The Undeniable said:

But presumably it's perfect for a track bike with a 1/8"
sprocket, where the usual 3/32" chain whip doesn't fit?

The one that I bought was slightly too narrow for that job
(2.8mm between inner plates, versus 2.9mm for a Campagnolo
Pista 1/8" sprocket, 3.4mm for a Wipperman track chain) -
though no doubt they vary.

It's a simple job to replace the too-narrow chain with a
piece of old track chain.

James Thomson

Dave Chadderton:

Quoted message said:

Make one with a cycling theme, just cut the last 8 to 10
inches off a pair of old bike forks. Rivet the end of an
old piece of chain to the mudgaurd eye and bingo!

Nice idea!

d.

"Just zis Guy, you know?" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

Cyclestore.co.uk have a chain whip for a shade over six
quid. I'd be inclined to take the view that the risk of
damage to cassette and fingers, to say nothing of the
required time to molish the thing, made that quite

an

Quoted message said:

attractive deal :-)

Yebbut no "something-for-nothing" satisfaction.

Pete.