disc brakes - new wheels ?

David said:

If I want to fit
disc brakes, what expense is involved ? Do I need completely new
wheels too ?

You need new hubs at least - ones with somewhere to fit the discs to.

d.

davek said:

David said:

If I want to fit
disc brakes, what expense is involved ? Do I need completely new
wheels too ?

You need new hubs at least - ones with somewhere to fit the discs to.

d.

Also make sure your frame and forks have disc mounts. This is very
unlikely to be a problem with a modern bike, but do check before you get
your wheels rebuilt. BTW, look at a wheel rebuild to cost 10-40 quid.

Chris
--
|C|H|R|I|S|@|T|R|I|N|I|T|Y|W|I|L|L|S|.|C|O|M|
Remove the bars to contact me

(David) said:

I have a bike fitted with XT wheels and XT V-Brakes. If I want to fit
disc brakes, what expense is involved ? Do I need completely new
wheels too ?
Any help appreciated.

I think there's two specs of XT hubs: if the hub body's small, then
you'll need new wheels, but it's possible you'll have a disc
compatible hub with six threaded holes to bolt a disc rotor to the
hub. The hub body will be noticably bigger, and it should be fairly
easy to tell the difference between the two.

A

in message <[email hidden]>, David

(') said:

I have a bike fitted with XT wheels and XT V-Brakes. If I want to fit
disc brakes, what expense is involved ? Do I need completely new
wheels too ?
Any help appreciated.

If you have disk hubs, you won't need new wheels. You can identify disk
hubs because they have a disk mount with six (I think 5mm) bolt holes
in it on the left hand side which is very obvious. It's perfectly safe
run non disk-specific rims with disk brakes - what you mustn't do is
run disk specific rims with rim brakes.

If you don't have disk hubs it would be perfectly possible to get disk
hubs and, provided the diameter spoke hole ring was the same you ought
to be able to rebuild the wheels with your existing spokes and rims;
but this is a faff and it may be less hassle just to get new wheels. If
you do rebuild your wheels remember that you cannot use radial spoking
with disk wheels - but then I've never seen a mountain bike with a
radially spoked wheel anyway.

--
[email hidden] (Simon Brooke) http://www.jasmine.org.uk/~simon/

Anagram: I'm soon broke.

Quoted message said:

If you don't have disk hubs it would be perfectly possible to get disk
hubs and, provided the diameter spoke hole ring was the same you ought
to be able to rebuild the wheels with your existing spokes and rims;
but this is a faff and it may be less hassle just to get new wheels. If
you do rebuild your wheels remember that you cannot use radial spoking
with disk wheels - but then I've never seen a mountain bike with a
radially spoked wheel anyway.

I took my bike into a shop last night and I will need new wheels
(which I suppose means new or refitted tyres, and all the rest of the
[censored] that needs to be installed. He quoted me a price way above what I
expected. I think it will have to wait until I get a new bike !
Thanks for the help.
Dave

David said:

I took my bike into a shop last night and I will need new wheels
(which I suppose means new or refitted tyres, and all the rest of the
[censored] that needs to be installed. He quoted me a price way above what I
expected. I think it will have to wait until I get a new bike !
Thanks for the help.
Dave

In which case think about getting some Magura HS33s. They are not quite
as good as disc brakes but pretty close and much better than standard
V-brakes. Should cost about £100 all in.

Tony

Simon Brooke said:

If you do rebuild your wheels remember that you cannot use radial
spoking with disk wheels - but then I've never seen a mountain bike
with a radially spoked wheel anyway.

The Hedgehog (my old Sonic) had a radially-spoked front wheel, trivia fans,
but that had cantilever brakes.

--

Dave Larrington - http://www.legslarry.beerdrinkers.co.uk/
===========================================================
Editor - British Human Power Club Newsletter
http://www.bhpc.org.uk/
===========================================================

Chris Davies said:

Also make sure your frame and forks have disc mounts. This is very
unlikely to be a problem with a modern bike, but do check before you
get your wheels rebuilt. BTW, look at a wheel rebuild to cost 10-40

If your frame doesn't have the mounts, but has suitably thick ally dropouts,
you can use an "A2Z Disk Brake Retro-Fit Adaptor ", available from
Gearshift:

<URL: http://tinyurl.com/6uxhj>

--

Dave Larrington - http://www.legslarry.beerdrinkers.co.uk/
===========================================================
Editor - British Human Power Club Newsletter
http://www.bhpc.org.uk/
===========================================================