UK and Europe · Public discussion

Cycle Grease

Started by Jimmy [censored] · · Last activity · 14 posts · 875 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
UK and Europe
Published
22 February 2005
Last activity
8 March 2005
Original author
Jimmy [censored]
Posts
14
Discussion status
Public discussion
Total views
875
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–14 of 14
Posts remain in their original chronological order.

Text size
  1. Hello was wondering what you though about which types of grease to use
    want to buy some that will do my raod headset and wheelsbearings and also
    to use on my mountain bike .
    what is the best and cheapest to buy any help welcome
    #Thank You
    JIm

  2. in message <[email hidden]>, Jimmy [censored]

    (') said:

    Hello was wondering what you though about which types of grease to
    use
    want to buy some that will do my raod headset and wheelsbearings and
    also to use on my mountain bike .
    what is the best and cheapest to buy any help welcome

    I use ordinary lithium grease (from your local garage or auto-parts
    shop) for bearings. For aluminium to steel threaded joints, though, I
    now use copper grease because it is alleged to help prevent joints
    seizing. Copper grease is very expensive when you get it in little
    tubes from the bike shop, but much cheaper when you get it in kilogram
    tubs from industrial suppliers.

    --
    [email hidden] (Simon Brooke) http://www.jasmine.org.uk/~simon/

    The Conservative Party now has the support of a smaller proportion of
    the electorate in Scotland than Sinn Fein have in Northern Ireland.

  3. Jimmy censored said:

    Hello was wondering what you though about which types of grease to
    use want to buy some that will do my raod headset and wheelsbearings
    and also to use on my mountain bike .
    what is the best and cheapest to buy any help welcome

    Comma Multipurpose lithium grease seems good value from Wilkinsons @ £2.19
    for a 500g tub, and that's a big tub (in the motoring section). Only
    thing that concerns me is that it's a bit thin so might dry out in
    bearings sooner than later (?)

    I use new-type* Finish Line Premium grease in bearings that I don't plan
    to redo for ages.

    * translucent stuff, not the old white stuff

    ~PB

  4. Jimmy censored said:

    Hello was wondering what you though about which types of grease to use
    want to buy some that will do my raod headset and wheelsbearings and also
    to use on my mountain bike .
    what is the best and cheapest to buy any help welcome

    ISTM that cycle grease is regular grease in expensive packaging. After
    all, the conditions (temperature, speed of rotation, load) that grease
    on a bike experiences compared to what grease in other machinery has to
    live with are pretty tame.

    I reckon any old mechanical grease will do, although I have to admit
    my toolbox has a tube of "Finish Line Premium Grease", so I was suckered
    by the packaging at the bike shop too.

    --
    jc

    Remove the -not from email

  5. "Jimmy [censored]" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    Hello was wondering what you though about which types of grease to use
    want to buy some that will do my raod headset and wheelsbearings and also
    to use on my mountain bike .
    what is the best and cheapest to buy any help welcome
    #Thank You
    JIm


    I bought some high quality bearings from a well known wheelbuilder and asked
    what grease they used and they said Pedros which I bought and found to be
    excellent.

    KC

  6. Getronics censored said:

    I bought some high quality bearings from a well known wheelbuilder and asked
    what grease they used and they said Pedros which I bought and found to be
    excellent.

    Synlube? That's what I use. I was taught the Lithium was fine if you
    were committed enough to strip and regrease every few months as the
    grease seems to turn into a form of glue when left.

    Jon

  7. mmm what do I get ....might try some petrolium jelly ....its not getting
    used anymore ;-))

    Thanks ;to you all for you help.
    will look up the synlube ...

    "Jon Senior" <jon_AT_restlesslemon_DOT_co_DOT_uk> wrote in message
    news:[email hidden]...

    Quoted message said:
    Getronics censored said:

    I bought some high quality bearings from a well known wheelbuilder and
    asked
    what grease they used and they said Pedros which I bought and found to be
    excellent.

    Synlube? That's what I use. I was taught the Lithium was fine if you were
    committed enough to strip and regrease every few months as the grease
    seems to turn into a form of glue when left.

    Jon

  8. Jimmy censored said:

    mmm what do I get ....might try some petrolium jelly ....its not
    getting used anymore ;-))

    I have used Vaseline as ersatz hub grease and I've always got away with
    it. It's not really grease, however, and grown ups generally say you
    shouldn't use it.

    --
    Dave...

  9. Just bought 500 grammes of grease - Castrol LM - £4.99 Halfords motoring
    section. The bike section had grease but it was more expensive and in a
    small tube.

  10. BUGGER IT JUST BOUGHT ....
    http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=7128903653
    Item number: 7128903653

    Well if it arrives i will let you know what it is like probably scooped out
    of someones ears ,,;-))

    jim

    "archierob" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    Just bought 500 grammes of grease - Castrol LM - £4.99 Halfords motoring
    section. The bike section had grease but it was more expensive and in a
    small tube.

  11. Jimmy censored said:

    Hello was wondering what you though about which types of grease to use
    want to buy some that will do my raod headset and wheelsbearings and also
    to use on my mountain bike .
    what is the best and cheapest to buy any help welcome
    #Thank You
    JIm


    I like the Park stuff because it's quite cheap and comes in a big
    toothpaste tube, which is less messy to use.

  12. archierob said:

    Just bought 500 grammes of grease - Castrol LM - £4.99 Halfords motoring
    section. The bike section had grease but it was more expensive and in a
    small tube.


    I used it for years. It's OK but not the most water-resistant stuff
    possible.

  13. got finesse multi grease 4 99 ..coloured red seems a bit thin but maybe
    that isthe the way it shoud be

    jim
    "Zog The Undeniable" <[email hidden]> wrote in message
    news:42203d7d.0@entanet...

    Quoted message said:
    archierob said:

    Just bought 500 grammes of grease - Castrol LM - £4.99 Halfords motoring
    section. The bike section had grease but it was more expensive and in a
    small tube.


    I used it for years. It's OK but not the most water-resistant stuff
    possible.

  14. In article <42203d7d.0@entanet>,

    Zog The Undeniable said:
    archierob said:

    Just bought 500 grammes of grease - Castrol LM - £4.99 Halfords motoring
    section. The bike section had grease but it was more expensive and in a
    small tube.


    I used it for years. It's OK but not the most water-resistant stuff
    possible.

    That's why they do a Castrol CL waterproof grease.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.