cutting carbon steerer

Mark OBrien said:

I have a Force Carbon fork with carbon steerer.

I have cut Aluminum fork steerer tubes before and cleaned
the cut up with a file and #400 grit sandpaper, but how do
I cut the carbon tube to length?

groups.google.comgroupsOpen ↗
8&oe=UTF-8&newwindow=1&q=cut+carbon+steerer&btnG=Search

On Tue, 20 Apr 2004 22:39:06 -0500, Mark OBrien

may have said:

I have a Force Carbon fork with carbon steerer.

I have cut Aluminum fork steerer tubes before and cleaned
the cut up with a file and #400 grit sandpaper, but how do
I cut the carbon tube to length?

It's recommended that a fine-tooth saw be used.

parktool.comhowfix forksize.shtmlOpen ↗

--
My email address is antispammed; pull WEEDS if replying via e-mail.
Typoes are not a bug, they're a feature.
Words processed in a facility that contains nuts.

need one of these:

sears.comproduct.doOpen ↗
s&vertical=TOOL&pid=00940862000

Mark OBrien said:

I have a Force Carbon fork with carbon steerer.

I have cut Aluminum fork steerer tubes before and cleaned
the cut up with a file and #400 grit sandpaper, but how do
I cut the carbon tube to length?

Mark OBrien <[email hidden]> wrote in message news:<[email hidden]>...

Quoted message said:

I have a Force Carbon fork with carbon steerer.

I have cut Aluminum fork steerer tubes before and cleaned
the cut up with a file and #400 grit sandpaper, but how do
I cut the carbon tube to length?

Use a fine-tooth hacksaw and tape the steerer with masking
tape at the cut line to prevent fraying. I like using a
cutting guide. Once cut, some fine sandpaper will finish the
edge. Remove tape when finished.

Robin Hubert

uce-<< need one of these:

sears.comproduct.doOpen ↗
s&vertical=TOOL &pid=00940862000 >><BR><BR>

No ya don't. A new-ish, high tooth count hacksaw blade...use
a guide...It's not that complicated.

Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St.
Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali
costruite eccezionalmente bene"

In article <[email hidden]>,
[email hidden] says...

Quoted message said:

I have a Force Carbon fork with carbon steerer.

I have cut Aluminum fork steerer tubes before and cleaned
the cut up with a file and #400 grit sandpaper, but how do
I cut the carbon tube to length?

You can use a dremel tool with a cut off wheel. Measure
twice. Wrap steerer with masking tape and draw line on
tape. Follow line with cut off wheel. Then clean up any
frayed ends.
-----------------
Alex

well, the grit saw is "text book", or it used to be.
less fraying.

Qui si parla Campagnolo said:

uce-<< need one of these:

sears.comproduct.doOpen ↗
Yes&vertical=TOOL &pid=00940862000 >><BR><BR>

No ya don't. A new-ish, high tooth count hacksaw
blade...use a guide...It's not that complicated.

Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St.
Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali
costruite eccezionalmente bene"

Qui si parla Campagnolo said:

No ya don't. A new-ish, high tooth count hacksaw
blade...use a guide...It's not that complicated.

Dumb question: Wouldn't one of those pipe cutter tools that
plumbers use do the job?

Art Harris

Quoted message said:

Qui si parla Campagnolo said:

No ya don't. A new-ish, high tooth count hacksaw
blade...use a guide...It's not that complicated.

Harris said:

Dumb question: Wouldn't one of those pipe cutter tools
that plumbers use do the job?

You'd likely fracture the fibers longitudinally and wreck
the thing.

32t blade.
--
Andrew Muzi www.yellowjersey.org Open every day since 1
April, 1971

In article <[email hidden]>,
[email hidden] says...

Quoted message said:

Dumb question: Wouldn't one of those pipe cutter tools that
plumbers use do the job?

You risk crushing the tube before you cut it.
-------------
Alex

Just buy the cutting guide tool from Park, get a decent
hacksaw blade and get it over with....

"Alex Rodriguez" <[email hidden]> wrote in message
"]news:[email hidden]...

Quoted message said:

In article <[email hidden]>,
[email hidden] says...

Quoted message said:

Dumb question: Wouldn't one of those pipe cutter tools
that plumbers use do the job?

You risk crushing the tube before you cut it.
-------------
Alex