Hi !
I want to change stem in my bike. I need more height stem. The question is what diameter of stam I need for cannondale fork. I guess that it should be wider then standard.
Thanks fo help
Pawel
Cycling Equipment · Public discussion
Cannondale F600 & stem diameter
Thread navigation
Jump through the discussion
Go to the original post, the replies on this page, or the latest preserved contribution.
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 24 April 2005
- Last activity
- 26 April 2005
- Original author
- pszczepan
- Posts
- 9
- Discussion status
- Public discussion
- Total views
- 4,830
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
pszczepan said:
Hi !
I want to change stem in my bike. I need more height stem. The question is what diameter of stam I need for cannondale fork. I guess that it should be wider then standard.Thanks fo help
PawelWhy don't you measure the steerer diameter ?
-
I measured it and it is between 39 and 40mm. When I'm looking for some stem at ebay I can find only 1"1/8 or 1"1/4. It is mean that I have to buy stem exactly made by cannondale or some company make stems for cannondales?
Pawel
-
pszczepan said:
I measured it and it is between 39 and 40mm. When I'm looking for some stem at ebay I can find only 1"1/8 or 1"1/4. It is mean that I have to buy stem exactly made by cannondale or some company make stems for cannondales?
Pawel
Given that it uses a Cdale headshock,I suppose anything is possible.Ask Cdale.
-
pszczepan said:
I measured it and it is between 39 and 40mm. When I'm looking for some stem at ebay I can find only 1"1/8 or 1"1/4. It is mean that I have to buy stem exactly made by cannondale or some company make stems for cannondales?
Pawel
39 - 40 mm??? What are you measuring? 40mm is slightly more than 1 1/2".
Check the specs at the Cannondale site or do a web search.
The steerer tube is 1 1/8" but you also need to know the size of the handle bar -
Exactly I know what I am talking about. I have Headshock made by Cannondale and fork diameter is something like 39 mm. I mean mountain bike - road bike has different size. Check it if you doubt.
paweL
-
Alpha said:
The steerer tube is 1 1/8" but you also need to know the size of the handle barNot a headshock steerer ....idiot.
-
pszczepan said:
Exactly I know what I am talking about. I have Headshock made by Cannondale and fork diameter is something like 39 mm. I mean mountain bike - road bike has different size. Check it if you doubt.
paweL
You are going to have to check with Cdale. I don't find anything bigger than 11/8" listed in the qbp,even tho there were 11/4 and 1.5" HS.
-
You need a Headshok specific CODA stem. The sizes and part numbers are here:
http://www.cannondale.com/bikes/tech/kitlist/CO.4.1.Coda%20Holy%20stems.pdf
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.