Campy record casette spacers

Quoted post said:

Originally posted by peterwright
I have managed to lose 2 of the spacers on my 11-23 10 spd cassette while in storage. A friend has some 9 spd spacers - can I use these or is the width different ?

Thanks

Peter

It won't work. In a 9 speed cassette, Each cog is 1.75 mm thick. Campy uses 2.8 mm amber resin spacers and spaces their cogs 4.55 mm on center. That is to say that the distance from the center of one cog to the center of the adjoining cog, measured from the center of the first cog to the center of the second cog, is 4.55 mm. The inside diameter of each amber spacer is 35.4 mm.

A 10 Speed has the following, Each cog is 1.70 mm thick. Campy uses 2.42 mm alloy spacers and spaces their cogs 4.12 mm on center. That is to say that the distance from the center of one cog to the center of the adjoining cog, measured from the center of the first cog to the center of the second cog, is 4.12 mm. The inside diameter of each alloy spacer is 35.1 mm.

peterwright said:

I have managed to lose 2 of the spacers on my 11-23 10 spd cassette while in storage. A friend has
some 9 spd spacers - can I use these or is the width different ?

You need 2.4 mm spacers and the 9sp ones are 2.8 mm. You can substitute Wheels conversion Shimano
spacers that are 2.5 mm each. They are purple and need to be rotated around to get the inside id
open just a tad of you can cut the spacer. Your local shop can get the 2.4 mm spacers and may have
some saved from shot cassettes.

You might consider buying your next cassette and using the spacers from it.

<< I have managed to lose 2 of the spacers on my 11-23 10 spd cassette while in storage. A friend
has some 9 spd spacers - can I use these or is the width different ? >><BR><BR>

10s spacers are aluminum and thinner-send me you address and I'll send ya a couple from toasted
cogset...the ones between the last/smaller cogs??

Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali costruite eccezionalmente bene"

Quoted post said:

Originally posted by Qui Si Parla Ca
<< I have managed to lose 2 of the spacers on my 11-23 10 spd cassette while in storage. A friend
has some 9 spd spacers - can I use these or is the width different ? >><BR><BR>

10s spacers are aluminum and thinner-send me you address and I'll send ya a couple from toasted
cogset...the ones between the last/smaller cogs??

Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali costruite eccezionalmente bene"

Thanks very much. Address is PO Box 23342, Claremont, 7735, Cape Town , South Africa. Dont worry if it is too much hassle.
(it is the one between smaller cogs)
Thanks again
Peter

peter-<< Thanks very much. Address is PO Box 23342, Claremont, 7735, Cape Town , South Africa. Dont
worry if it is too much hassle. (it is the one between smaller cogs) Thanks again Peter >><BR><BR>

I'll mail a few..no problem..May be a while to get to you tho..In South Africa...

Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali costruite eccezionalmente bene"

Quoted post said:

Originally posted by Qui Si Parla Ca
peter-<< Thanks very much. Address is PO Box 23342, Claremont, 7735, Cape Town , South Africa. Dont
worry if it is too much hassle. (it is the one between smaller cogs) Thanks again Peter >><BR><BR>

I'll mail a few..no problem..May be a while to get to you tho..In South Africa...

Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali costruite eccezionalmente bene"

Thanks again - very good of you.

Peter