Running full Campy Record 10 setup- This has been happening since the parts were new. Downshifts
under light load are very smooth, Upshifts under any load feel like the chain slips a tooth then
catches resulting in a loud "clunk". Hanger looks aligned too. Any ideas? Thanks!
Cycling Equipment · Public discussion
campy 10 - fix for bad upshift clunks?
Thread navigation
Jump through the discussion
Go to the original post, the replies on this page, or the latest preserved contribution.
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 16 May 2003
- Last activity
- 19 May 2003
- Original author
- Alan
- Posts
- 6
- Discussion status
- Public discussion
- Total views
- 942
- Views / 30 days
- 0
- Topics
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
"alan" <[email hidden]> wrote in message news:<[email hidden]>...
Quoted message said:
Running full Campy Record 10 setup- This has been happening since the parts were new. Downshifts
under light load are very smooth, Upshifts under any load feel like the chain slips a tooth then
catches resulting in a loud "clunk". Hanger looks aligned too. Any ideas? Thanks!Are you by any chance using a Wipperman chain? My Campag 10 clunked loudly with a Wipperman but
shifts smoothly with a new-style Campag chain. -
Quoted message said:
Upshifts under any load feel like the chain slips a tooth then catches resulting in a loud "clunk".
Hanger looks aligned too. Any ideas?Get Shimano.
-
jkpoulos-<< >Any ideas?
Get Shimano.
Get out.....
Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali costruite eccezionalmente bene" -
[email hidden] (Jkpoulos7) wrote in message
news:<[email hidden]>...Quoted message said:
Quoted message said:
Upshifts under any load feel like the chain slips a tooth then catches resulting in a loud
"clunk". Hanger looks aligned too. Any ideas?Get Shimano.
Shimano breaks down!
Camy breaks in......
-
Peter,
Shimano? Say it ain't so Joe???
scott
[email hidden]
"Qui si parla Campagnolo" <[email hidden]> wrote in message
"]news:[email hidden]...Quoted message said:
jkpoulos-<< >Any ideas?
Get Shimano.
Get out.....
Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali costruite eccezionalmente bene"
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.