I'm getting ready to make my 1st campy 10 chain replacement. Are y'all sticking with the campy chain
or using something else? Thanks, Dave
Cycling Equipment · Public discussion
campy 10 chain replacement
Thread navigation
Jump through the discussion
Go to the original post, the replies on this page, or the latest preserved contribution.
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 1 September 2003
- Last activity
- 2 September 2003
- Original author
- David Lack
- Posts
- 8
- Discussion status
- Public discussion
- Total views
- 847
- Views / 30 days
- 0
- Topics
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
I stayed with the Campy chain but am using the Wipperman Connex link or the Superlink III made for
10sp chains. I don't use a Perma Link or the new replacement pin method. I've had no problem with
either the Wipperman Connex or Superlink III. "David Lack" <[email hidden]> wrote in message
"]news:[email hidden]...Quoted message said:
I'm getting ready to make my 1st campy 10 chain replacement. Are y'all sticking with the campy
chain or using something else? Thanks, Dave -
"David Lack" <[email hidden]> wrote in message "]news:[email hidden]...
Quoted message said:
I'm getting ready to make my 1st campy 10 chain replacement. Are y'all sticking with the campy
chain or using something else? Thanks, DaveWippermann and KMC-10
--
Andrew Muzi www.yellowjersey.org Open every day since 1 April, 1971 -
lack-<< I'm getting ready to make my 1st campy 10 chain replacement. Are y'all sticking with the
campy chain or using something else? >><BR><BR>Think the best is still the Campagnolo 10s chain and the new pin works very well. I would also rec.
a IRD(no 11t) or Connex(make sure it is proper direction for an 11t) snap link to clean it.Interesting that the guy that works for me talked to somebody he knows at SRAM and when they have a
10s chain, it won't have a snaplink, they say they can't make a reliable one(?)..Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali costruite eccezionalmente bene" -
Andy-<< Wippermann and KMC-10 >><BR><BR>
No doubt good chains, but I think the Campagnolo one, when installed correctly works fine.
Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali costruite eccezionalmente bene" -
David Lack said:
I'm getting ready to make my 1st campy 10 chain replacement. Are y'all sticking with the campy
chain or using something else? Thanks, Dave
I quit using campy 10sp chains when I broke one twice in the same week. The side plate just blew out
each time when climbing out of the saddle. Now I use the KMC series 9200, 9spd chain. I connect the
chain using the SRAM 9spd powerlink. THIS SETUP WORKS FLAWLESSLY with my Record 10sp drive train. If
you pay more than ten bucks for a chain that lasts and works without a hitch on your 10sp drive
train then I feel sorry for you.Kenny Lee
-
Quoted message said:
Interesting that the guy that works for me talked to somebody he knows at
SRAMQuoted message said:
and when they have a 10s chain, it won't have a snaplink, they say they
can'tQuoted message said:
make a reliable one(?)..
That's funny, i use their 9 speed PowerLink Gold on all my Campy 10 speed chains without problems.
"Qui si parla Campagnolo" <[email hidden]> wrote in message
"]news:[email hidden]...Quoted message said:
lack-<< I'm getting ready to make my 1st campy 10 chain replacement. Are
y'allQuoted message said:
sticking with the campy chain or using something else? >><BR><BR>
Think the best is still the Campagnolo 10s chain and the new pin works
veryQuoted message said:
well. I would also rec. a IRD(no 11t) or Connex(make sure it is proper direction for an 11t) snap
link to clean it.Interesting that the guy that works for me talked to somebody he knows at
SRAMQuoted message said:
and when they have a 10s chain, it won't have a snaplink, they say they
can'tQuoted message said:
make a reliable one(?)..
Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302
(303)440-3535 vecchios.comvecchios.comOpen ↗ "Ruote convenzionali costruite eccezionalmente bene" -
x-no-archive:yes
Quoted message said:
Andy-<< Wippermann and KMC-10 >><BR><BR>
No doubt good chains, but I think the Campagnolo one, when installed
correctlyQuoted message said:
works fine.
Peter Chisholm
On one of our club rides, a guy's Campy 10 speed chain broke and nobody could help him out. Someone
had to go get a pickup truck to carry him in. What would you have recommended---or perhaps what
should he carry in the future?Pat in TX
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.