Buying a used recumbent

John Kimmel said:

I'm going to look at a Vision R-40. Can someone give me technical
information on the bike? I'd like to know whether it is adjustable for
riders between 5'6" and 6', the mechanics of adjusting for different
size riders, whether the conversion between LWB and SWB is a major
modification or simply a matter of switching parts around. I'd also like
to know opinions of the bike in general.

ATP Vision is of course out of business, so you are on your own if
anything Vision specific breaks. However, most repairs could be made
and/or parts replaced by a competent frame builder and machinist,
respectively.

The bike will fit the height range you mention. Changing seat to pedal
distance requires adjusting the boom and changing the chain length. The
bolts that secure the boom have an eccentric force applied to them, so
they should be replaced after a few adjustments, unless one enjoys
drilling and tapping to remove broken bolts. Due to these factors, the
Vision 40-series bikes are best suited for use by a single rider.

ATP Vision revised the frame design in 1999, lengthening the wheelbase.
The earlier models are twitchier, and require more attention to balance
and steering when riding. The stock components were also significantly
upgraded in 1999.

The SWB to LWB conversion is reportedly something that can be done by
anyone with basic bicycle mechanic skills in an hour or two.

--
Tom Sherman

Thanks. Looks like it will be worth the drive to look at it.

Tom Sherman wrote:

--
John Kimmel
[email hidden]

GET YER STINKING PAWS OFF ME YOU DAMN DIRTY APE!

"John Kimmel" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

Thanks. Looks like it will be worth the drive to look at it.

Tom Sherman wrote:

--
John Kimmel
[email hidden]

GET YER STINKING PAWS OFF ME YOU DAMN DIRTY APE!

I take it you aren't interested in the used NoCom.

skip

John Kimmel said:

I'm going to look at a Vision R-40. Can someone give me technical
information on the bike? I'd like to know whether it is adjustable for
riders between 5'6" and 6', the mechanics of adjusting for different
size riders, whether the conversion between LWB and SWB is a major
modification or simply a matter of switching parts around. I'd also like
to know opinions of the bike in general.

Thanks

--
J Kimmel
[email hidden]
www.metalinnovations.com

"Cuius testiculos habes, habeas cardia et cerebellum." - When you have
their full attention in your grip, their hearts and minds will follow.

The last couple years, 02-03 Vision produced bikes, the boom was straight. These models had a quick release for boom adjustments. Also, they had a extra pulley up front to automatically adjust the chain when the boom was adjusted. I took that off of mine and shortened the chain since it is a one rider bike. My wifes still has it on hers. Also, there are two mounting positions for the seat which allows for a couple inches. As for Vision specific parts, Hostel Shoppe still carries some of the more common stuff like seat fabric and skewers. The kits for lwb-swb conversions can be found but not easily. Changing from uss to oss can be done still using parts from performance cycleing.

Ken

skip said:

"John Kimmel" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

GET YER STINKING PAWS OFF ME YOU DAMN DIRTY APE!

I take it you aren't interested in the used NoCom.

Zoology lesson of the day: Monkeys are not apes. 😉

--
Tom Sherman

John Kimmel said:

Thanks. Looks like it will be worth the drive to look at it.

Understand that unless you are one of the physically gifted people who
learn new athletic skills with ease, you may find the Vision R-40 (and
many other recumbents) hard to ride at first. Patience is required.

The first recumbent I tried to ride was a 1998 Vision R-40. I was not
able to both steer and balance after half an hour or so of trying.
Several months later, after having ridden a RANS Wave for several
hundred miles, I was able to ride the same exact R-40 without
significant difficulty.

--
Tom Sherman

"Tom Sherman" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

John Kimmel said:

Thanks. Looks like it will be worth the drive to look at it.

Understand that unless you are one of the physically gifted people who
learn new athletic skills with ease, you may find the Vision R-40 (and
many other recumbents) hard to ride at first. Patience is required.

The first recumbent I tried to ride was a 1998 Vision R-40. I was not able
to both steer and balance after half an hour or so of trying. Several
months later, after having ridden a RANS Wave for several hundred miles, I
was able to ride the same exact R-40 without significant difficulty.

My God, do you have some physical disability that would cause this? The
Vision is my favorite bike of about 10 recumbents that I have. I will admit
it was not the first recumbent I ever got, but it presented no problems
whatsoever when I first rode it. It is a quick steerer, depending on how you
have it set up, but it takes only a few minutes to get used to. I will admit
it is one of the shorter SWB recumbents, but there are good reasons for that
too.

I am very sorry Vision went out of business as I regard it as having the
most comfortable recumbent seat ever made. It was a stroke of genius how
they designed that seat to be easily adjusted and removed from the frame.

--
Regards,

Ed Dolan - Minnesota

Edward Dolan said:

"Tom Sherman" <[email hidden]> wrote in message
news:[email hidden]...

Quoted message said:

John Kimmel said:

Thanks. Looks like it will be worth the drive to look at it.

Understand that unless you are one of the physically gifted people who
learn new athletic skills with ease, you may find the Vision R-40 (and
many other recumbents) hard to ride at first. Patience is required.

The first recumbent I tried to ride was a 1998 Vision R-40. I was not able
to both steer and balance after half an hour or so of trying. Several
months later, after having ridden a RANS Wave for several hundred miles, I
was able to ride the same exact R-40 without significant difficulty.

My God, do you have some physical disability that would cause this? The
Vision is my favorite bike of about 10 recumbents that I have. I will admit
it was not the first recumbent I ever got, but it presented no problems
whatsoever when I first rode it. It is a quick steerer, depending on how you
have it set up, but it takes only a few minutes to get used to. I will admit
it is one of the shorter SWB recumbents, but there are good reasons for that
too.

Read my post again. Note that with some recumbent riding experience I
was able to ride the 1998 R-40 "without significant difficulty".

My gross motor skills are towards the poor end of the normal range.
However, I was able to ride a certain dual ISO 406-mm wheel size
Wishbone RT without problems after an adjustment period. This is a bike
that has given several experienced recumbent riders problems on their
first ride.

Quoted message said:

I am very sorry Vision went out of business as I regard it as having the
most comfortable recumbent seat ever made. It was a stroke of genius how
they designed that seat to be easily adjusted and removed from the frame.

However, care is required in fastening the seat properly. I recall a
Vision rider going over backwards on startup, as his seat came loose at
the front.

--
Tom Sherman