Cycling Equipment · Public discussion

Brooks Saddle Problem

Started by Charles · · Last activity · 8 posts · 601 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
6 August 2005
Last activity
11 August 2005
Original author
Charles
Posts
8
Discussion status
Public discussion
Total views
601
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–8 of 8
Posts remain in their original chronological order.

Text size
  1. I just purchased a new Brooks B17 Champion and have ridden it several
    hundred miles. I notice that, as it is breaking in, the depression on
    one side is much deeper than the other. This is where the sit bones
    meet the saddle.

    This is my second Brooks saddle and the first one ended up with roughly
    equal depressions.

    Is it possible that the leather was stretched too tightly on one side
    during construction?

    Any other thoughts would be greatly appreciated.

    Charles

  2. Charles said:

    I just purchased a new Brooks B17 Champion and have ridden it several
    hundred miles. I notice that, as it is breaking in, the depression on
    one side is much deeper than the other. This is where the sit bones
    meet the saddle.

    This is my second Brooks saddle and the first one ended up with roughly
    equal depressions.

    Is it possible that the leather was stretched too tightly on one side
    during construction?

    I don't see how. If you look at your saddle, you will see that the real
    stretching is fore-aft, not side to side. It is free sideways except at
    the brace at the very back.

    I suppose it's possible that the leather is substantially thinner on
    one side. This should be easy enough to check with a caliper. It's also
    possible that you have had some injury or other biomechanical change
    since your previous saddle that is causing you to sit asymmetrically.

    Another possibility is that the depressions are more symmetrical than
    they look. "Much deeper"? Those depressions don't get very deep as the
    saddle is breaking in. After the saddle has nearly stretched out, sure,
    but not in the first few hundred miles. How much do you weigh?

  3. Charles said:

    I just purchased a new Brooks B17 Champion and have ridden it several
    hundred miles. I notice that, as it is breaking in, the depression on
    one side is much deeper than the other. This is where the sit bones
    meet the saddle.

    This is my second Brooks saddle and the first one ended up with roughly
    equal depressions.

    Is it possible that the leather was stretched too tightly on one side
    during construction?

    Any other thoughts would be greatly appreciated.

    Are you open to jests regarding the shape, symmetry and/or completeness of your
    ass?

    Ron

  4. Quoted message said:


    I don't see how. If you look at your saddle, you will see that the real
    stretching is fore-aft, not side to side. It is free sideways except at
    the brace at the very back.

    I suppose it's possible that the leather is substantially thinner on
    one side. This should be easy enough to check with a caliper. It's also
    possible that you have had some injury or other biomechanical change
    since your previous saddle that is causing you to sit asymmetrically.

    Another possibility is that the depressions are more symmetrical than
    they look. "Much deeper"? Those depressions don't get very deep as the
    saddle is breaking in. After the saddle has nearly stretched out, sure,
    but not in the first few hundred miles. How much do you weigh?

    Thanks for the thoughts. Your comment on the leather stretching fore
    to aft certainly makes sense.

    I weigh 160 pounds so I am definitely not a heavyweight. The only
    other change I made on the bike was taking off my SPD-SL pedals and
    replacing them with Speedplay Frogs. But, I don't see how that could
    have any impact.

    Also, I have had no injury during the time since I have been riding
    Brooks saddles.

    Still mystified,

    CHarles

  5. "41"wrote...

    Quoted message said:


    Charles said:

    I just purchased a new Brooks B17 Champion and have ridden it several
    hundred miles. I notice that, as it is breaking in, the depression on
    one side is much deeper than the other. This is where the sit bones
    meet the saddle.

    This is my second Brooks saddle and the first one ended up with roughly
    equal depressions.

    Is it possible that the leather was stretched too tightly on one side
    during construction?

    I don't see how. If you look at your saddle, you will see that the real
    stretching is fore-aft, not side to side. It is free sideways except at
    the brace at the very back.

    I suppose it's possible that the leather is substantially thinner on
    one side. This should be easy enough to check with a caliper. It's also
    possible that you have had some injury or other biomechanical change
    since your previous saddle that is causing you to sit asymmetrically.

    Another possibility is that the depressions are more symmetrical than
    they look. "Much deeper"? Those depressions don't get very deep as the
    saddle is breaking in. After the saddle has nearly stretched out, sure,
    but not in the first few hundred miles. How much do you weigh?

    FWIW, the Brooks Colt on my tourer has the assymetrical depressions
    described by the OP, while the B17 on my mountain bike/winter commuter has
    broken in in a fairly symmetrical pattern. Both saddles are quite
    comfortable, so I haven't lost too much sleep over the issue. I suspect that
    "41" is correct, that the saddle leather is a bit thinner / more elastic in
    one spot than on the rest of the saddle. I can't really tell when I'm riding
    the bike, so I don't see much to worry about.
    --
    mark

  6. Thanks to all.

    It is good to know that others had similar scenarios and that it
    appears to be no longterm concern.

    Charles

  7. On 6 Aug 2005 06:07:51 -0700, "Charles" <[email hidden]>

    Quoted message said:

    I just purchased a new Brooks B17 Champion and have ridden it several
    hundred miles. I notice that, as it is breaking in, the depression on
    one side is much deeper than the other. This is where the sit bones
    meet the saddle.

    This is my second Brooks saddle and the first one ended up with roughly
    equal depressions.

    Is it possible that the leather was stretched too tightly on one side
    during construction?

    Any other thoughts would be greatly appreciated.

    Charles


    -------

    Two suggestions:

    1. Ya rubbed excess proofide on the side with deeper depression
    (perhaps underneath, too). Rub sommore on the stiff side.

    2. Get yer ass kicked on the side of deep depression.

  8. Charles said:
    Quoted message said:


    I don't see how. If you look at your saddle, you will see that the real
    stretching is fore-aft, not side to side. It is free sideways except at
    the brace at the very back.

    I suppose it's possible that the leather is substantially thinner on
    one side. This should be easy enough to check with a caliper. It's also
    possible that you have had some injury or other biomechanical change
    since your previous saddle that is causing you to sit asymmetrically.

    Another possibility is that the depressions are more symmetrical than
    they look. "Much deeper"? Those depressions don't get very deep as the
    saddle is breaking in. After the saddle has nearly stretched out, sure,
    but not in the first few hundred miles. How much do you weigh?

    Thanks for the thoughts. Your comment on the leather stretching fore
    to aft certainly makes sense.

    I weigh 160 pounds so I am definitely not a heavyweight. The only
    other change I made on the bike was taking off my SPD-SL pedals and
    replacing them with Speedplay Frogs. But, I don't see how that could
    have any impact.

    Also, I have had no injury during the time since I have been riding
    Brooks saddles.

    Still mystified,

    CHarles

    My (both my) Brooks are indented more to the left. For some reason, I'm
    favoring my left.

    --
    Bob in CT

Active in the last 60 minutes

Active in this thread

0 users · 1 guest ·0 bots ·1 total

No signed-in users are active right now.

No known search crawlers active right now.