Bicycle seat for road use.

on a normal uni, I don't think so. However, on a uni like the Purple
Phaze, it might be interesting. I only say this because bike seats are
really designed to allow leg movement around a point not only below but
in front of where you're sitting. Unicycles go straight down. The
handlebars on a uni like Purple Phaze (and possibly the Outta Phaze
unis, which I want one of even though they don't exist to my knowledge..
u-turn? 😄) allow the seat to be pushed farther back. If I were to do a
road tour on a uni, that would be the machine I'd pick.

--
flyer - Level 5 Unicyclist
------------------------------------------------------------------------
flyer's Profile: http://www.unicyclist.com/profile/9894
View this thread: http://www.unicyclist.com/thread/43192

I was planning on doing that with the 29 I'm building. I figured that
since I'm going to use an aero bar, it might work out.

--
onetrack - Stair Master

"People over here have a dangerous habit of adding quotes to signature
lines."
-Klaas Bil
------------------------------------------------------------------------
onetrack's Profile: http://www.unicyclist.com/profile/6374
View this thread: http://www.unicyclist.com/thread/43192

flyer said:

*on a normal uni, I don't think so. However, on a uni like the Purple
Phaze, it might be interesting. I only say this because bike seats are
really designed to allow leg movement around a point not only below
but in front of where you're sitting. Unicycles go straight down. The
handlebars on a uni like Purple Phaze (and possibly the Outta Phaze
unis, which I want one of even though they don't exist to my
knowledge.. u-turn? 😄) allow the seat to be pushed farther back. If I
were to do a road tour on a uni, that would be the machine I'd pick. *

Hi Flyer, you are welcome to contact 'LiveWire Unicycles'
([email hidden]) for more information.

I should point out that there are two distinct aspects to Pete's
innovative Purple Phaze unicycle. The first aspect is the external
jackshaft design, which has been done several times in the past, but is
sufficiently modern that we are licensing it from Pete (also out of
respect). The second aspect is the frame design, which Pete is allowing
us to use without license. This is a fairly straightforward extension
of the Hunter frame to a more inclined body position, and is innovative
in that Pete envisioned and built it, and made it work for himself.

Although our photos show Pete's unicycle, there is no reason that the
two ideas cannot be separated. Accordingly, the Outta Phaze (an
externally-fixed geared unicycle) will not necessarily have Pete's frame
design. For the first version, we are trying to cut down on the number
of new things in order to focus on several fundamentals of the drive
train, and will likely (not surely) use a more traditional frame
design.

It is also possible for us to build an ungeared unicycle with the
v-frame design.

Thanks for your interest!

--
U-Turn - Cool water for the flame

Weep in the dojo... laugh on the battlefield.
'LiveWire Unicycles' (http://www.livewireunicycles.com)
'Strongest Coker Wheel in the World'
(http://www.unicyclist.com/gallery/albup39)
'29er Tire Study' (http://u-turn.unicyclist.com/29erTireStudy/)
'New York Unicycle Club' (http://www.newyorkunicycle.com)
-- Dave Stockton
------------------------------------------------------------------------
U-Turn's Profile: http://www.unicyclist.com/profile/691
View this thread: http://www.unicyclist.com/thread/43192

I would think it could only work if you ride with some weight
permanently on some form of handlebars, or you would just slip forward
on the saddle. Unless you angled the saddle upwards, but that would be
pretty uncomfortable I reckon - bike saddles are best when slightly
tilted nose down.

--
rob.northcott - Speed Freak (apparently)

You do not need a parachute to skydive. You only need a parachute to
skydive twice
------------------------------------------------------------------------
rob.northcott's Profile: http://www.unicyclist.com/profile/7436
View this thread: http://www.unicyclist.com/thread/43192

This is how I'm setting up my Schlumpf uni, and depending on how it
goes, will probably set up my MUNIs as well.

There is no reason for MUni and road Unicycle seats to have a curve on
it. A flat seat* should be much more comfy since it does not force the
front of your crotch against the front of the seat.

In terms of handling, most riders are resting their weight on handles
all the time, so you're not likely to topple forwards.

[*Bike riders complain about saddle soreness after riding for a few
hours, whereas unicycle riders complain about saddle soreness after
riding a few minutes- that's the only reason I can think of why this
should be the case- especially for unicyclists who are using handles to
rest their weight on]

--
GizmoDuck - NZUNI

o-kO
'www.adventureunicyclist.com' (http://www.adventureunicyclist.com/) -
check out my new and improved website
'Laos Unicycle Tour' (http://www.laosunitour.org)
'New Zealand Unicycle Federation' (http://www.unicycle.org.nz)
------------------------------------------------------------------------
GizmoDuck's Profile: http://www.unicyclist.com/profile/794
View this thread: http://www.unicyclist.com/thread/43192