Cycling Equipment · Public discussion

avocet display

Started by dnacowboy · · Last activity · 4 posts · 379 views

This thread is locked and is currently read-only.

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
20 April 2005
Last activity
21 April 2005
Original author
dnacowboy
Posts
4
Discussion status
Public discussion
Total views
379
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. My avocet 40 speedo has a slight display problem. I hang the bike over
    the winter. As a result I think the LCDs has "pooled" to the bottom of
    the display. So there are a few black LCDs that are always on in the
    bottom of the display. It blocks a few things but I think the speedo
    still works. Any remidies for this?
    Ray

  2. dnacowboy said:

    My avocet 40 speedo has a slight display problem. I hang the bike over
    the winter. As a result I think the LCDs has "pooled" to the bottom of
    the display. So there are a few black LCDs that are always on in the
    bottom of the display. It blocks a few things but I think the speedo
    still works. Any remidies for this?

    Not being sarcastic here, but have you asked Avocet?

    Avocet Service Center
    235 Alma St #D
    Palo Alto, CA. 94301
    Tel. 650-470-0478 Fax. 650-470-0490

    Otherwise, my only suggestion would be that you only ride upside down

    ;-)

  3. On 20 Apr 2005 14:20:55 -0700, "dnacowboy" <[email hidden]>

    Quoted message said:

    My avocet 40 speedo has a slight display problem. I hang the bike over
    the winter. As a result I think the LCDs has "pooled" to the bottom of
    the display. So there are a few black LCDs that are always on in the
    bottom of the display. It blocks a few things but I think the speedo
    still works. Any remidies for this?

    What I would do: Replace the battery, and while the unit is open,
    check for signs of moisture inside.

    --
    Typoes are a feature, not a bug.
    Some gardening required to reply via email.
    Words processed in a facility that contains nuts.

  4. Replace the battery, and while the unit is open,

    Quoted message said:

    check for signs of moisture inside.

    probbabley correct-there is a disruption from photon impact-a nutcase
    idea after the above place the unit in bright sunlight(heat) and watch
    the mix go nuts. remove when its nuts and use. it'll go back to
    "normal" cooling.
    having place a strong magnet at the weak end.
    then its time for roswell!

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.