My avocet 40 speedo has a slight display problem. I hang the bike over
the winter. As a result I think the LCDs has "pooled" to the bottom of
the display. So there are a few black LCDs that are always on in the
bottom of the display. It blocks a few things but I think the speedo
still works. Any remidies for this?
Ray
Cycling Equipment · Public discussion
avocet display
This thread is locked and is currently read-only.
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 20 April 2005
- Last activity
- 21 April 2005
- Original author
- dnacowboy
- Posts
- 4
- Discussion status
- Public discussion
- Total views
- 379
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
dnacowboy said:
My avocet 40 speedo has a slight display problem. I hang the bike over
the winter. As a result I think the LCDs has "pooled" to the bottom of
the display. So there are a few black LCDs that are always on in the
bottom of the display. It blocks a few things but I think the speedo
still works. Any remidies for this?Not being sarcastic here, but have you asked Avocet?
Avocet Service Center
235 Alma St #D
Palo Alto, CA. 94301
Tel. 650-470-0478 Fax. 650-470-0490Otherwise, my only suggestion would be that you only ride upside down
;-)
-
On 20 Apr 2005 14:20:55 -0700, "dnacowboy" <[email hidden]>
Quoted message said:
My avocet 40 speedo has a slight display problem. I hang the bike over
the winter. As a result I think the LCDs has "pooled" to the bottom of
the display. So there are a few black LCDs that are always on in the
bottom of the display. It blocks a few things but I think the speedo
still works. Any remidies for this?What I would do: Replace the battery, and while the unit is open,
check for signs of moisture inside.--
Typoes are a feature, not a bug.
Some gardening required to reply via email.
Words processed in a facility that contains nuts. -
Replace the battery, and while the unit is open,
Quoted message said:
check for signs of moisture inside.
probbabley correct-there is a disruption from photon impact-a nutcase
idea after the above place the unit in bright sunlight(heat) and watch
the mix go nuts. remove when its nuts and use. it'll go back to
"normal" cooling.
having place a strong magnet at the weak end.
then its time for roswell!
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.