Possibly not saved from scrap like the Dawes Galaxy project I mentioned in an earler post here, but a nice Peugot saved from an eternity in a dark garage. All I have done is re-rim the wheels, replace a wonky LH crank and put on some bar tape.
Possibly not saved from scrap like the Dawes Galaxy project I mentioned in an earler post here, but a nice Peugot saved from an eternity in a dark garage. All I have done is re-rim the wheels, replace a wonky LH crank and put on some bar tape.
I see you're thinking about a new seatpost for this bike. Are you sure that it's 22.0mm? If it is, the nearest match I can think of is a BMX post. However, I have a similar bike of about the same age, which was 24.0mm, an equally unusual size, which is/was available from www.yellowjersey.org in the US.
On Jan 25, 1:59 pm, Peter Amey <[email hidden]> wrote:
[snip]
Quoted message said:
Quoted message said:
--www.amey.org.uk
Hi Peter,
I see you're thinking about a new seatpost for this bike. Are you sure that it's 22.0mm? If it is, the nearest match I can think of is a BMX post. However, I have a similar bike of about the same age, which was 24.0mm, an equally unusual size, which is/was available from www.yellowjersey.org in the US.
[snip]
Quoted message said:
bookieb
Thanks. I'll dig the verniers out before I buy anything but it certainly looked like 22mm.
My oh my - my first 'proper' bike - Christmas 1985. Mine had a carrier and white bar tape, and cottered cranks, but the paint job and graphics are the same. Me and the peugeot went miles... does that one have the little peg on the stay to hook the chain on when removing the rear wheel?
The memories - oh, the memories.
Thanks
Tim
-- Sent from Birmingham, UK... Check out www.nervouscyclist.org 'I find sometimes it's easy to be myself, but sometimes I find it's better to be somebody else.' - Dave Matthews 'So Much To Say' My 'reply to' address is valid, mail to the posting address is dumped
From a single speed grandmother bike with dodgy hub brake, to a 7 speed
nexus hub with coaster brake, nexus dynamo hub with roller brake. It required a bit of frame and fork re-spacing and the addition of 3" of handlebar to fit the gear/brake lever on.