UK and Europe · Public discussion

Amusing tyre failure

Started by David Nutter · · Last activity · 10 posts · 349 views

This thread is locked and is currently read-only.

Thread navigation

Jump through the discussion

Go to the original post, the replies on this page, or the latest preserved contribution.

Thread details

What we know about this thread

Original section
UK and Europe
Published
15 August 2005
Last activity
17 August 2005
Original author
David Nutter
Posts
10
Discussion status
Public discussion
Total views
349
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–10 of 10
Posts remain in their original chronological order.

Text size
  1. The rear tyre on my fixed was looking a bit tatty so I bought a replacement
    and removed the old one. Suffice to say, the reason why the bike was feeling
    a bit squirmy when going around bends was revealed in dramatic fashion! The
    casing had torn completely away from the tyre body in places, meaning I
    could shove a finger between body and casing and have it come out on the
    other side of the tyre.

    The tube was still confined by the tyre body, so no blowout to warn me of
    tyre failure, so I'm glad I caught it before it caught me. This will be the
    last time I use cheapo Kenda tyres. The bike now sports a nice Michelin with
    a blue go-faster stripe in the middle of the tread and is much better
    behaved.

    In other news I have six weeks of roadworks to deal with on my short journey
    to work, complete with temporary traffic lights sporting those annoying
    cable guard things that stretch across the road. Joy...

    Regards,

    -david

  2. On 15 Aug 2005 21:12:47 GMT,

    David Nutter said:

    to work, complete with temporary traffic lights sporting those annoying
    cable guard things that stretch across the road. Joy...


    While annoying, I can cope with those cable guard things. But why is it
    that >90% of these lights won't change for a bike (a significant
    proportion are temperamental even with a car). They all seem to use IR
    sensors which (usually) work for fixed traffic lights rather than
    induction loops. But why don't they also have a guaranteed timeout so
    that they will always change within a couple of minutes? At least at
    traffic lights you can usually see if it is safe to proceed. But at
    roadworks you often can't see.

    (Saw one a couple of weeks ago that was displaying both red and green -
    I have never seen one in an impossible state before - although I was a
    passenger in a car at the time, not on a bike)

    Tim.

    --
    God said, "div D = rho, div B = 0, curl E = - @B/@t, curl H = J + @D/@t,"
    and there was light.

    http://tjw.hn.org/ http://www.locofungus.btinternet.co.uk/

  3. Tim Woodall said:

    On 15 Aug 2005 21:12:47 GMT,

    David Nutter said:

    to work, complete with temporary traffic lights sporting those annoying
    cable guard things that stretch across the road. Joy...

    While annoying, I can cope with those cable guard things. But why is it
    that >90% of these lights won't change for a bike (a significant
    proportion are temperamental even with a car). They all seem to use IR
    sensors which (usually) work for fixed traffic lights rather than
    induction loops. But why don't they also have a guaranteed timeout so
    that they will always change within a couple of minutes? At least at
    traffic lights you can usually see if it is safe to proceed. But at
    roadworks you often can't see.

    (Saw one a couple of weeks ago that was displaying both red and green -
    I have never seen one in an impossible state before - although I was a
    passenger in a car at the time, not on a bike)

    Tim.

    From what I remember being told once, temporary traffic lights are only
    advisory, so you can take a chance, though if you cause an accident,
    then you are for it.

    I admit, they can be annoying at times, especially if the sensor is not
    pointing correctly. They normally only trigger for objects approaching
    at more than 5mph, so ride fast, brake late when approaching them.

    --
    There will never be true sexual equality until women accept that the
    default position of a toilet seat is UP

  4. Pete Whelan said:

    From what I remember being told once, temporary traffic lights are only
    advisory, so you can take a chance, though if you cause an accident,
    then you are for it.

    Only if a Traffic Regulation Order has not been obtained for them. If
    it has then they are as legitimate as fixed lights. Of course you never
    know this till your defence weasel has to chase it up.

    Quoted message said:

    I admit, they can be annoying at times, especially if the sensor is not
    pointing correctly. They normally only trigger for objects approaching
    at more than 5mph, so ride fast, brake late when approaching them.

    Hate them myself becasue they do not always sense bikes..

    ...d

  5. Tim Woodall said:

    On 15 Aug 2005 21:12:47 GMT,

    David Nutter said:

    to work, complete with temporary traffic lights sporting those annoying
    cable guard things that stretch across the road. Joy...


    While annoying, I can cope with those cable guard things. But why is it
    that >90% of these lights won't change for a bike (a significant
    proportion are temperamental even with a car). They all seem to use IR
    sensors which (usually) work for fixed traffic lights rather than
    induction loops. But why don't they also have a guaranteed timeout so
    that they will always change within a couple of minutes? At least at
    traffic lights you can usually see if it is safe to proceed. But at
    roadworks you often can't see.

    I think these ones are operated by a timer. I couldn't see any obvious
    sensors, though they may be there somewhere. Considering the amount of
    traffic that uses that road they would presumably be permanently activated
    in both directions in any case 🙂

    The tailback this evening was a sight to behold. Especially as I sailed past
    the lot of 'em.

    Regards,

    -david

  6. David Nutter said:

    On 2005-08-15, Tim Woodall <[email hidden]> wrote:

    Quoted message said:
    Quoted message said:

    While annoying, I can cope with those cable guard things. But why is it
    that >90% of these lights won't change for a bike (a significant
    proportion are temperamental even with a car). They all seem to use IR

    I think these ones are operated by a timer. I couldn't see any obvious
    sensors, though they may be there somewhere. Considering the amount of
    traffic that uses that road they would presumably be permanently activated
    in both directions in any case 🙂

    Personally, whenever I'm in charge of them, I have them set them up on
    timer only. The sensors are indeed temperamental at best, and a
    purely timed setup does at least let everyone through eventually. The
    disadvantage is that in a not very busy road it might delay someone
    slightly longer than if the sensors worked.

    regards, Ian SMith
    --
    |\ /| no .sig
    |o o|
    |/ \|

  7. On Tue, 16 Aug 2005 05:07:39 +0000 (UTC),

    Pete Whelan said:
    Tim Woodall said:

    On 15 Aug 2005 21:12:47 GMT,

    David Nutter said:

    to work, complete with temporary traffic lights sporting those annoying
    cable guard things that stretch across the road. Joy...

    While annoying, I can cope with those cable guard things. But why is it
    that >90% of these lights won't change for a bike (a significant
    proportion are temperamental even with a car). They all seem to use IR
    sensors which (usually) work for fixed traffic lights rather than
    induction loops. But why don't they also have a guaranteed timeout so
    that they will always change within a couple of minutes? At least at
    traffic lights you can usually see if it is safe to proceed. But at
    roadworks you often can't see.

    (Saw one a couple of weeks ago that was displaying both red and green -
    I have never seen one in an impossible state before - although I was a
    passenger in a car at the time, not on a bike)

    Tim.

    From what I remember being told once, temporary traffic lights are only
    advisory, so you can take a chance, though if you cause an accident,
    then you are for it.


    This is very old law when the traffic lights were just red and green
    with no amber. Now you have to obey them.

    88: You MUST obey all traffic light signals (see Light signals
    controlling traffic section) and traffic signs giving orders, including
    temporary signals & signs (see Traffic signs and Road works signs
    sections) . Make sure you know, understand and act on all other traffic
    and information signs and road markings (see sections on Warning signs,
    Direction signs, Information signs,Road works signs and Road markings).
    Laws RTA 1988 sect.36, TSRGD regs 10,15, 16, 25, 26, 27, 28, 29, 36, 38
    & 40

    Note the "including temporary signals"

    Quoted message said:

    I admit, they can be annoying at times, especially if the sensor is not
    pointing correctly. They normally only trigger for objects approaching
    at more than 5mph, so ride fast, brake late when approaching them.

    Ah. Didn't realise that about the speed. I'm usually slowing right down
    in the hopes they might change before I need to unclip. Suppose I need
    to learn how to trackstand and then how to panic stop into a trackstand
    :-)

    Tim.

    --
    God said, "div D = rho, div B = 0, curl E = - @B/@t, curl H = J + @D/@t,"
    and there was light.

    http://tjw.hn.org/ http://www.locofungus.btinternet.co.uk/

  8. On Tue, 16 Aug 2005 19:03:43 +0000 (UTC) someone who may be Tim
    Woodall <[email hidden]> wrote this:-

    Quoted message said:

    88: You MUST obey all traffic light signals (see Light signals
    controlling traffic section) and traffic signs giving orders, including
    temporary signals & signs (see Traffic signs and Road works signs
    sections) . Make sure you know, understand and act on all other traffic
    and information signs and road markings (see sections on Warning signs,
    Direction signs, Information signs,Road works signs and Road markings).
    Laws RTA 1988 sect.36, TSRGD regs 10,15, 16, 25, 26, 27, 28, 29, 36, 38
    & 40

    Though rule 152 of the Highway Code says, in part, "If the traffic
    lights are not working, proceed with caution."

    I'm quite sure the legal bods and other members of the car lobby
    would be very upset if a cyclist pointed out that if traffic lights
    do not detect their vehicle then they are not working.

    --
    David Hansen, Edinburgh | PGP email preferred-key number F566DA0E
    I will always explain revoked keys, unless the UK government
    prevents me by using the RIP Act 2000.

  9. "David Hansen" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:

    On Tue, 16 Aug 2005 19:03:43 +0000 (UTC) someone who may be Tim
    Woodall <[email hidden]> wrote this:-

    Quoted message said:

    88: You MUST obey all traffic light signals (see Light signals
    controlling traffic section) and traffic signs giving orders, including
    temporary signals & signs (see Traffic signs and Road works signs
    sections) . Make sure you know, understand and act on all other traffic
    and information signs and road markings (see sections on Warning signs,
    Direction signs, Information signs,Road works signs and Road markings).
    Laws RTA 1988 sect.36, TSRGD regs 10,15, 16, 25, 26, 27, 28, 29, 36, 38
    & 40

    Though rule 152 of the Highway Code says, in part, "If the traffic
    lights are not working, proceed with caution."

    I'm quite sure the legal bods and other members of the car lobby
    would be very upset if a cyclist pointed out that if traffic lights
    do not detect their vehicle then they are not working.

    Not at all. It also means that "if traffic lights
    do not detect *their*vehicle then they are not working." as well.

    :o)

  10. David Hansen said:

    "If the traffic
    lights are not working, proceed with caution."

    Which is also the case even when they are working.
    Green only means go if the way is clear and it is safe to do so.

    John B

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.